Supply And Delivery Of Manufacturing Im-Ii Hand Pump And Spares And G.I Pipes In Various Places Or Their Authorized Agents With Specific M.O.U In Chittoor District Excluding All Taxes Etc., Complete For Entering Into Rate Contract Agreement. , Head Assembly With Third Plat Including Cover And Cover Bolts As Per Is-14103/1994.,Hex - Bolt M 12 X 40 As Per Is 1363,Hex - Bolt M 12 X 20 As Per Is 1363,Hex - Nut M 12,Washer (4Mm Thick) For M 12 Bolts,Front Cover,Third Plate,Handal Assembly With Out Axle,Chain With Coupling,Spacer For Handle Assembly,Water Tank Assembly,Stand Assembly (Normal),Stand Assembly (Telescopic),Socket (Riser Pipe Holder),Connecting Rod 12Mm 3Mts Long Electro Galvanizing Bright Bar) Along With M12 X 50 Long And M12 X 20 Long Hex Coupler At Either End Welded,Hex Bolt M. 10 X 1.5 X 40 Is-1364 (Part-I),Cylinder Body With Brass Liner (The Brass Liner Shall Confirm),Reduced Cap,Handle Axles With Two Nuts And One Washer 4Mm Thick,Plunger Rods 450Mm Long With Two Couplers M 12 X 40,Plunger Yoke Body,Upper Valve,Check Valve,Check Valve Sheet,Spacer For Cylinder Assembly Suitable For Nitrite Rubber Pump Bucket,Follower,Rubber Seat Retainer,Pump Bucket,Sealing Ring,Rubber Seating (Upper Valve),Rubber Seating (Lower Valve),Cylinder Assembly Complete Unit Inclusive Of Stainless Steel,Handle Axle Washer - 4Mm Thick To Suit M 12 As Per Is 2016,Prevailing Torque Steel Hex Lock Nut M 10 X 1.5 Is 7002 X 1972,Single Side Shielded Bearing Confirming To Is 6456/1972 Sil, Hmt, Nbc, Mb, Tat, Urb/Sbl Or Any Other Make Approved By Unicef And Acceptable To Sgs (India) Ltd.,,Upper Valve Assembly With Nitrile Rubber Pump Bucket (Compraising Of Plunger Yoke Body, Upper Valve, Rubber Seating, Spacer And Follower),Lower Valve Assembly Comprising Rubber Seat Retainer, Rubber,Ss Rod 1.0 Meter Length,Manufacture, Supply And Delivery Of Special Toolset For Installation And Maintance Of Im-Ii Hand Pumps As Per Unicef Specifications, Excluding Taxes,12 Pipe Wrench,18 Pipe Wrench,24 Pipe Wrench,12Mm Hand Bottom Die Set With 2 Piece Die,Double Ended Spanner M17 X M19,Big Screw Driver,Small Screw Driver,300Mm Hack Saw Frame,Hack Saw Blades,250Mm Triangular File With Handle,1Kg Hammer With Handle,3 Pipe Vice,Multi Purpose Grease (5Kg Tin),3Mm Thick Nylon Rope (In The Form Of 100Mts),Lifters For Lifting 32Mm Dia Gi Pipes,32Mm Tap Sets With Handles (Bsw),12 Adjustable Wrench,Gi Extension Flangers 9 Rise Suitable For Telescopic Stand,Gi Extension Flangers 1 Rise Suitable For Telescopic Stand,1/2 X 6 Chisels,40Mm X 12Mm Dia Hexagonal Rod Couplers,Manufacture, Supply And Delivery Of Isi Marked Fully Hot Dip Galvanized Deep Well India Mark-Ii Hand Pump Assembly Complete Unit With 10 Nos Of Connecting Rods (Bright Bars) Of 12Mm Dia, 3Mts Length Each Confirming To Is: 9301/1990 With Its Ammendments / Revisions Up To Date Including Bis Packing, Loading And Unloading And Stacking Charges And Excluding All Taxes And Manufactures Identification Mark Shall Be As Per Bis Specifications With Telescopic Stand Assembly. (New Im-Ii Hand Pump Set),Manufacture And Supply Of Galvanized Mild Steel Pipes (Medium Class) Of The 32Mm Nominal Bore Confirming To Is: 1239/Part-I/1990 Continuously Welded/High Frequency Induction Welded (Hfiw) Type And Screwed At Both Ends As Per Is: 554 And One End Fitted With Socket (Medium Class) Manufactured From Seam Less Pipe As Per Is: 1239/Part-2/1992 And Other End Fitted With A Plastic Cap And Delivery At Departmental Stores In Prakasam District. Each Pipe Should Bear Isi Mark And Manufacturers Trade Mark And Correct Length Of 3.00M + 0 Mm Or - 25 Mm Including Cost Conveyance Delivery At Destination. The Rates Shall Be Excluding Gst.
