Military Engineer Services-MES has published Repair Replacement Of External Electric Supply Including Repair To Feeder Pillar Boc Lt Pannel Cables, Junction Box, Apfc Pannels, Street Light At Sahapore Mil Camp And Od Alipore Under Ge ( C ) Kolkata. Submission Date for this Tender is 17-10-2022. Distribution Box Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-10-2022 |
| Sl. No. | Item Description |
| 1 | Taking out old U/S LTUG cable of any size and any description including GI pipe of any dia and bricks for cable protection where ever appeared and all as directed by Engineer-in-Charge. Note:- (i)Serviceable bricks obtained shall be stacked properly for re-use.(ii)Excavation and earth work shall be measured and paid separately.(iii) Serviceable cable obtained shall be stacked properly for re-use. |
| 2 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 95 Sqmm 3.5 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 3 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 70 Sqmm 3.5 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 4 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 50Sqmm 3.5 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 5 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 35 Sqmm 3.5 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 6 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 25 Sqmm 4 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 7 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 2 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 8 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 10 Sqmm 2 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 9 | Re-laying/re-fixing only cables at different sizesobtained from Item No 1here-in-before in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge are as under:- (A) 10 Sqmm 2 Core |
| 10 | (B) 16 Sqmm, 2 core |
| 11 | (C) 25 Sqmm, 3 1/2 core |
| 12 | (D) 35 Sqmm, 3 1/2 core |
| 13 | (E) 50 sqmm, 3 1/2 core |
| 14 | (F) 70 sqmm 3 1/2 core |
| 15 | (G) 95 sqmm 3 1/2 core |
| 16 | Excavation in trenches, next 1.5m wide and n exc 1.5m in depth for laying of cables/foundation of poles and getting out in soft /loose soil complete all as specified and directed by Engr-in-Charge. |
| 17 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed. |
| 18 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point in soft / loose soil complete as specified and directed. |
| 19 | Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment. |
| 20 | Supply and laying in trenches Bricks, sub class "B" over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. |
| 21 | Laying onlyin trenches Old serviceable bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. |
| 22 | Supply and erecting steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified, type 410 SP-31, 9 Metre long including two coats of aluminium paint over one coat of red oxide primer with dismantling of old unserviceable pole and PCC complete all as specified and as directed by the Engr-in-Charge. Note:- Rates quoted shall be deemed to be inclusive of following works:- (a) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surface. (b) Material and labour for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamelled paint of apprised shade n exc 5 Cm height including numbering of pole all as directed by EIC. |
| 23 | M&LPlain cement concrete (1:3:6) type C-2 ( with using 40 mm graded stone aggregate) as in foundation of polesincluding necessary form workcomplete all as specifed and directed. |
| 24 | M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of pole/struts and other similar location etc with and including all necessary form work complete all as specified & directed. |
| 25 | M&L Rendering 15mm thick in Cement Mortar 1:6 onon Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 26 | Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strips 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore medium grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed. |
| 27 | M&L for Cutting roads / hard standing to a depth not less than 45 cm and not less than 40 cm wide for laying of GI pipe to draw the UG cable and making good the disturbed surfaces by filling of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate and finished the surface even and smooth with out using extra cement and disposed off the surplus debris and soil to a distance not exc50 mcomplete all as specified and as directed by the Engr-in-Charge. |
| 28 | M&L40mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed. Make- Jindal/Tata/Nezone |
| 29 | M&L50mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed. Make- Jindal/Tata/Nezone |
| 30 | M&L80mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed. Make- Jindal/Tata/Nezone |
| 31 | M&L for repair of LT panels/LT feeder piller boxes by carrying out checking thoroughly all electrical connections, lugs busbar, voltmeter, ammeter ,cable glands ,insulator on busbar, including busbar changing and tightening all connections properly with proper size of new nut, bolt, washer as per the site requirements and insulation of busbar with colour code insulation tapes including welding on damage panel and preparation of surfaces internal and external of panels/feeder piller boxes by cleaning with dry cloth /removal dust particles by using air blower and scratching the old painted surfaces as directed and painting with two coats of synthetic enamel paint over a coat of red oxide primer and rewriting existing letters /numbers as directed and repair the existing PCC basement of the feeder piller box/ LT panel as per site requirement or directed including applying one coat of cement base point after preparation of surfaces and testing complete as per direction by Engineer- in- charge. Note:- Cost of PCC, Painting, Nut, bolt, washer etc. are deemed to be included in quoted rates. |
| 32 | Supply and fixing in Repairfollowing spares parts for panels fittings :- (a) Supplyonly 3 ph Voltmeter meter, digital type,50-520 VAC (P-P) voltage with in-built selector switch, complete with suitable size of CT"s, size 96 x 96 mm complete all as specified and as directed by the Engr-in-Charge. Make:-L&T Cat No- WL132010OOOO or equivalent in Legrands/HCL or equivalent. |
| 33 | (b) Supplyonly 3 ph Ammeter, digital type,0-500 Amps with in-built selector switch, complete with suitable size of CT"s, size 96 x 96 mm complete all as specified and as directed by the Engr-in-Charge.Make:-L & T Cat No- WL131010OOOO or equivalent in Legrands/HCL or equivalent. |
| 34 | (c) Supplyonly Indicator lamp, LED type of colour red, blue and yellow. |
| 35 | (d) Supply only MCCB 3 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed. Make- L&T Cat no-CM90517OOJO or equivalent model from make:- ABB / Legrand. |
| 36 | (e) SupplyMCCB 3 Pole, 415 V, Adjustable type,100 Amps with breaking capacity 16 KA complete all as specified and directed. Make -L&T Cat no-CM90517OOKO or equivalent model from make:- ABB / Legrand. |
| 37 | (f) Supplyonly, MCCB 3 Pole, 415 V, Adjustable type, 125 Amps with breaking capacity 16 KA complete all as specified and directed. Make - L&T Cat no-CM90676OOLO or equivalent model from make:- ABB / Legrand. |
| 38 | (g) Supplyonly, MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed. Make- L&T Cat no-CM92108OOM1OG or equivalent model from make:- ABB / Legrand. |
| 39 | (h) Supplyonly, MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed. Make - L&T Cat no-CM92109OON1OG or equivalent model from make:- ABB / Legrand. |
| 40 | (j) Supplyonly, MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed. Make - L&T Cat no- CM92109OOP1OG or equivalent model from make:- ABB / Legrand. |
| 41 | (k) Supplyonly Changeover Switch, open type, 250 Amps, Manual open execution type, 415 V including necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- L&T Cat Part No. CO32500OOOO or equivalent model from make:-Legrand / Schneider. |
| 42 | S&F Aluminium strip 25 x 3.15mmwith saddles and fixing screws etc. for roof conductors and down conductors above ground as in repair complete all as specified and directed. |
| 43 | S&F GI strip of size 32 x 6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground as in repair complete all as specified and directed. |
| 44 | S&F Air termination aluminium single pointed rod 12 mm dia, 300 mm long as in repair complete all as specified and directed. |
| 45 | S&F Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8mm dia 25mm long hex head screw as in repair complete all as specified and as directed. |
| 46 | S&F New generation energy saving and environmental friendly long life LED street light luminaries 90 Watt with 50mm dia light grade GI pipe bent to shape of 45º 1.5 m long, made up of pressure die cast aluminium housing with high power LED as lighting source and lensseparate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells Cat Part No. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHOor Make:- Bajaj Cat part No. BRTFG 90W LED I V2or Make:- Crompton Cat Part No. LSTP-90-CDL-HPM. |
| 47 | S&F New generation energy saving and environmental friendly long life LED street light luminaries 45 Watt with 50mm dia light grade GI pipe bent to shape of 45º 1.5 m long, made up of pressure die cast aluminium housing with high power LED as lighting source and lensseparate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells Cat Part No. ENDURAPEARLNEOSL45 WLED757PASYTOPCor Make:- Bajaj Cat part No. BRTFG 45W LED I or Make:- Crompton Cat Part No. LSTS-45-CDL-M. |
| 48 | S&F New generation energy saving and environmental friendly long life LED flood light luminaries 100 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lensseparate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- .Havells Cat Part No. JETAIRISFLS100WLED757SYMLTGor Make:- Bajaj Cat part No. BJFL 100WLED Ior Make:- Surya Cat Part No. SLE FL 100W IP66 LMS NEO. |
| 49 | S&F New generation energy saving and environmental friendly long life LED flood light luminaries 150 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lensseparate driver compartment with IP66 protection after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Havells Cat Part No. JETAIRISFLS150WLED757SYMLTGor Make:- Bajaj Cat part No.BJFL 100WLED Ior Make:- Crompton Cat Part No. LFLN-150-CDL-160M. |
| 50 | S&F PVC junction box of size 250mm x250mm 105mmand box should havefour terminal of 25 Sqmm and earth terminal along with MCB 6 Amps and fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charg. Make:-Hansel Cat part No. K 8250 or equivalent model from make:- Sintex. Cat No.-GSJB1414 |
| 51 | S&F New generation, Led bollards10W, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. Make:- Crompton Cat Part No. LBLSN-10-CDL or equivalent Philips/ Surya Roshni Ltd/Wipro/ Havells / C&S Electric Ltd. |
| 52 | S&F KWH meter 1 P LCD meter 5-30A with optional port + Box including taking down old unserviceable one complete all as directed by Enginner-in-Charge. Make:- L&T cat Part No.WM101BC5DL0 or equivalent model from make:- Legrand / Siemens/ BCH. |
| 53 | S&F KWH meter 3 Ph 4 W kWh CT op base mtg 240V 5 -10 A with optional port + Box including taking down old unserviceable one complete all as directed by Enginner-in-Charge. Make:- L&T cat Part No.WM301BC3C00 or equivalent model from make:- Legrand / Siemens/ BCH. |
| 54 | S&F Twin core 2.5 sqmm multi stranded aluminium conductor PVC insulated and sheathed cables to connect from junction box to street light fittings through inside of pole and connect as in repair complete all as specified and directed by Engineer-in-Charge. |
| 55 | M&L Preparation of old painted surface of existing steel tubular swaged pole 9 mtr long, cross arms, clamps, GI street light bracket etc and applying two coats of aluminium paint including writing pole number & bottom of pole painted with black paint with yellow strip around between the junction of aluminium paint and black paint complete all as specified and directed. |
| 56 | S&F LED decorative post top lantern, 40 Watt capacity for energy efficient conservation upto 50% and with eco friendly lighting system with all accessories and necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- Havells cat part No. RUBYPT35WLED830PSYMTOPC or Surya Cat part No. SLE PT 40W-ETPP or Make:- Bajaj cat part No. BGCL 40W/CG-Cat No- LPTO-40-CDL |
| 57 | S&Fnew integral aviation light comprising of aluminium housing with polycarbonate encloser housing with high power LED as lighting source and lenswith IP66 protectionmaking connection with PVC cable of 0.50 sq mm three core sheathed not more than 0.5 meter in length complete all as specified and as directed. Make:- Bajaj cat part No BGAV302LED/ Crompton /Surya |
| 58 | M&L Minor repair /maintenance of motor , cross arms, flood light, GI street light bracket etc of existing 16 Mtrs High Mast lightfor serviceablecondition complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
