New To Pipeline Water Supply Scheme For Hasol, Tal. Lanja Dist. Ratnagiri
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Sep 2022
0 days left
EMD
32897
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lanja → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
New To Pipeline Water Supply Scheme For Hasol, Tal. Lanja Dist. Ratnagiri
BOQ
| Sl. No. | Item Description |
| 1 | SCHEME A PATILWADI PUMPIMG MACHINERY |
| 2 | Item No. 1Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. |
| 3 | Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages |
| 4 | 2.00 BHP PUMPSET |
| 5 | Item No. 2Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. |
| 6 | 3 core 10sqmm |
| 7 | Item No. 3Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380-440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 8 | Item No.4Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for < 7.5 HP pump etc.complete. (Market rate) |
| 9 | Item No.5Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. |
| 10 | Pressure gauge (100 mm dia) |
| 11 | Item No. 6Providing tools for pumping. |
| 12 | Item No. 7Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) |
| 13 | Item No. 8Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 14 | SCHEME A PATILWADI GSR |
| 15 | 1Designing (aesthetically), and constructingRCCelevatedservice reservoirsoffollowingcapacitywith RCCstagingconsistingofcolumns, internalandexternalbracingsspaced verticallynotmore than4.5 metres centre to centre for ESR having capacityupto500cumandnotmore than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compoundtotheinsidefaceofthe containerincludingrefillingdisposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypassarrangements asper departmental design, providing andfixingaccessoriessuchasM.S. ladder, C.I. manhole frame and covers, waterlevelindicators,lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair casefromgroundleveltorooflevel, M.S. grill gate of 2 M height with locking arrangementofapproveddesign,B.B. masonry chambers for all valves, ventilatingshafts,providingand applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti- termite treatment for underground parts ofthestructureandgivingsatisfactory watertightnesstestasperI.S.code. The job to include painting the name of theschemeandotherdetailsonthe reservoir as per the directions of Engineer-in-Charge. |
| 16 | The design of the structure be in accordancewithrelevantI.S. specification (I.S. 3370 - 1965 orrevised.) |
| 17 | The design shall satisfy the stipulations as per I.S. 1893 - 1984 and I.S. 13920 / 1993 for seismic force and I.S. - 11682 /1985forR.C.C.stagingofoverhead tanks. |
| 18 | Fordesignhavingmorethan6 columns, provision of internal bracing is obligatory.External bracings is also obligatory. |
| 19 | TheentirestructureshallbeinM-300 mix only. |
| 20 | Plain round mild steel bars grade-I conformingtoI.S.432part-Iorhigh yieldstrengthdeformedbars conformingtoI.S.1786orI.S.1139 shallbeused,grade-IImildsteelbars will not be allowed. |
| 21 | Irrespectiveofthetypeoffoundation proposedinthedesign,onesetof bracing be provided at the ground level. |
| 22 | These rates include providing M.S. ladderforE.S.R.supto2lakhlitres capacityandprovidingspiralstaircase for E.S.R. above 2 lakh litres capacity. |
| 23 | Staging shall have to be designed with stressesofM-200concreteforESR. HoweverallRCCconstructionshould be done in M-300. |
| 24 | Theseratesareincludingthecostof uplift pressureifany andentire dewatering during execution. In case of water logging area where water is stretch at shallow depth, extra provision of dewatering shall be made as per site condition. |
| 25 | All conditions given in the Member Secretary\"sCircularNo.MJP/TS-I/ 350/1668dt.2-8-97andMJP/S-I/ 350/ 2127dt. 13-7-99shall bestrictly followed and additional cost, if any, due totheseconditionsisincludedinthe rates mentioned below. |
| 26 | For RCC 2000 Litrs |
| 27 | 2 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below |
| 28 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 29 | 3 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 30 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 31 | 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 32 | 65 mm sluice valves - PN -1.0 |
| 33 | 5 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 34 | Double flanged specials of all diameters |
| 35 | SCHEME A PATILWADI DISRIBUTION |
| 36 | Item No. 1Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note: One coupler shall be provided with each full length of pipe cost of which is included in rates below. |
| 37 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 38 | Item No. 2Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 39 | Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form |
| 40 | 63 mm dia HDPE PN 6 Pipes |
| 41 | Item No. 3 10% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 42 | Item No. 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 43 | Sluice valves 50 mm Dia |
| 44 | Item No. 5 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without bypass arrangement |
| 45 | Sluice valves 50 mm Dia forWashout |
| 46 | Item No. 6 Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 47 | Air Valve 25 mm Dia |
| 48 | Item No. 7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) |
| 49 | Earth Soils |
| 50 | Item No. 8 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) |
| 51 | HMB |
| 52 | Item No. 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 53 | Soft Rock |
| 54 | Item No. 10 Excavation in laterite rock masses mechanically, including lift upto 1.5 M including trimming and levelling the bed removing the excavated material upto a distance of 50 metres beyond the area andlift as below stacking by as directed by Engineer-in-charge, normal dewatering excluding backfilling, etc. complete. |
| 55 | Laterite Rock |
| 56 | Item No. 11 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 57 | Item No. 12 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 58 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 59 | Item No. 13 Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 60 | 63 mm dia HDPE PN 6 Pipes |
| 61 | Item No. 14 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 62 | Sluice Valve 65 mm Dia |
| 63 | Item No. 15 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 64 | Sluice valves 50 mm Dia forWashout |
| 65 | Item No. 16 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) |
| 66 | Air valves 25 mm Dia |
| 67 | Item No. 17 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) |
| 68 | Foundation on Murum and Harder Strata. |
| 69 | upto 150mm |
| 70 | Item No. 18 Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) |
| 71 | Item No. 19 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. |
| 72 | As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 73 | Item No. 20 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. complete |
| 74 | Item No. 21 HydraulictestingofG.I.pipelinetospecifiedpressure includingcostofallmaterialsandlabourandwaterfor testingforthelengthupto1kmusingreciprocatingtype pumpswhichshouldbeabletoprovidespecifiedtest pressure gauges and other necessary equipments,labour operationchargesetc.requiredfortesting,Therates underthisitemshallalsoincludecostofretestingif necessary and reinstating to original postion. |
| 75 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 76 | Item No. 22 Hydraulic testing of H. D. P. E./ M. D. P. E./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 77 | 63 mm dia HDPE PN 6 Pipes |
| 78 | Item No. 23 Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 79 | For single ball air valve |
| 80 | Item No. 24 Providingandfixingboarddisplayinginformation, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangularshapeof1.20mx0.90msize made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stoveenamelonbacksideandborder/messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3 mm frame with properly cross braced M.S.angles of size 35 mm x 35 mm x 3 mm duly painted including Two M.S.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65mlongpaintedwithalternateblackandwhite bandsof25cmwidthincludingallfixturesetc.and fixing the boards in 1:4:8 concrete block of size 60 cm x60cmx75cmincluding,excavation,refilling, transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge MORTH 801 |
| 81 | SCHEME A PATILWADI MISC |
| 82 | Item No. 1 Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB rule |
| 83 | SCHEME A PATILWADI MISC |
| 84 | ITEM NO. 1Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. |
| 85 | Note: Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department. |
| 86 | SCHEME B GUJARWADI PUMPING MACHINERY |
| 87 | Item No. 1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. |
| 88 | Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages |
| 89 | 2.00 BHP PUMPSET |
| 90 | Item No. 2 Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. |
| 91 | 3 core 10sqmm |
| 92 | Item No. 3 Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380-440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 93 | < 7.5 HP |
| 94 | Item No.4 Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for < 7.5 HP pump etc.complete. (Market rate) |
| 95 | Item No.5 Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. |
| 96 | Pressure gauge (100 mm dia) |
| 97 | Item No. 6 Providing tools for pumping. |
| 98 | Item No. 7 Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) |
| 99 | Item No. 8 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 100 | Item No. 9 Providing,Lowering,Laying double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 101 | Sluice valves 65 mm Dia. |
| 102 | Item No. 10 Providing,Lowering,Laying & supplying ISI mark CI D/F reflux valve (Non- returnvalve)offollowingdiaincludingalltaxes(central andlocal), railwayfreight, inspectionchargesunloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984) |
| 103 | Reflux valves 65 mm Dia. |
| 104 | SCHEME B GUJARWADI RISING MAIN |
| 105 | Item No. 1 ProvidingISImarkG.I.Pipeoffollowingclassanddia. Includingalllocalandcentraltaxes,octroi,inspection charges, transportation to stores. etc. complete. |
| 106 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 107 | Item No. 2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 108 | 63 mm Dia HDPE Pipe 8 Kg/sqcm |
| 109 | Item No. 3 10% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 110 | Item No. 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 111 | Sluice valves 65 mm Dia. |
| 112 | Item No. 5 Providing & supplying ISI mark CI D/F reflux valve (Non- returnvalve)offollowingdiaincludingalltaxes(central andlocal), railwayfreight, inspectionchargesunloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984) |
| 113 | Reflux valves 65 mm Dia |
| 114 | Item No. 6 Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991. |
| 115 | Sluice valves 65 mm Dia. for Washout |
| 116 | Item No. 7 ProvidingandsupplyingAirvalvesasperIS-10845and MJP’s standard specifications of approved mark and quality offollowingdiametersincludingalltaxes (Central andlocal),railwayfright,inspectionchargesunloading fromrailwaywagons,loadingintotruck,transportation upto departmental stores/ site, unloading and stacking etc. complete. |
| 117 | Air valves 25 mm Dia |
| 118 | Item No. 8 Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 119 | (EARTH SOIL) |
| 120 | Item No. 9 Excavation for foundation/pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. |
| 121 | (HARD MURRUM) |
| 122 | Item No. 10 Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 123 | Soft Rock |
| 124 | Item No. 11 Excavation in laterite rock masses mechanically, including lift upto 1.5 M including trimming and levelling the bed removing the excavated material upto a distance of 50 metres beyond the area andlift as below stacking by as directed by Engineer-in-charge, normal dewatering excluding backfilling, etc. complete. |
| 125 | Laterite Rock |
| 126 | Item No. 12 Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. |
| 127 | Item No. 13 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 128 | GI Pipe 65 mm Dia M Class 6.63 kg/m |
| 129 | Item No. 14 Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 130 | 63 mm Dia HDPE Pipe 8 Kg/sqcm |
| 131 | Item No. 15 Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including nut bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves) |
| 132 | Sluice valves 65 mm Dia. |
| 133 | Item No. 16 Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves) |
| 134 | Reflux valves 65 mm Dia |
| 135 | Item No. 17 Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves) |
| 136 | Sluice valves 65 mm Dia. for Washout |
| 137 | Item No. 18 Lowering, Layingand fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. |
| 138 | Air valves 25 mm Dia- Single Bash |
| 139 | Item No. 19 Providingandfixinginpositionairvalveshaftincluding providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providingPCCblockofM-150concrete150mmthick aroundtheairvalveteeincludingencasingofvertical shaft in PCC M-150 as shown in type design together with providingandmakingflangedjointswhereverrequired and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) |
| 140 | upto 150 mm on Murum & harder strata |
| 141 | Item No. 20 ProvidingandlayinginsitufollowinggradesofC.C.of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. |
| 142 | b) 1:2:4 (M-150) grade for encasing |
| 143 | Item No. 21 ProvidingandconstructingB.B.masonryvalvechamber with 15 cm thick 1:3:6 proportion PCC bedding, including excavation, B.B. masonry in C.M. 1:5proportion 12 mm thickcementplasterincm1:4proportiononbothsides with providing and fixing C.I. manhole frame and cover in RCC1:2:4copingorcmthickslabetc.completeas directed by Engineer-in-charge. |
| 144 | Size 0.90 x 0.60 x 1.20 |
| 145 | Item No. 22 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15 cm layers with all leadsand lifts including consolidation, surcharging, etc. complete |
| 146 | Item No. 23 HydraulictestingofG.I.pipelinetospecifiedpressure includingcostofallmaterialsandlabourandwaterfor testingforthelengthupto1kmusingreciprocatingtype pumpswhichshouldbeabletoprovidespecifiedtest pressure gauges and other necessary equipments,labour operationchargesetc.requiredfortesting,Therates underthisitemshallalsoincludecostofretestingif necessary and reinstating to original postion. |
| 147 | GI Pipe 80 mm Dia M Class 8.64 kg/m |
| 148 | Item No. 24 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 149 | 63 mm Dia HDPE Pipe 8 Kg/sqcm |
| 150 | Item No. 25 Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves. |
| 151 | Sluice valves 65 mm Dia. |
| 152 | Reflux valves 65 mm Dia |
| 153 | Sluice valves 65 mm Dia. for Washout |
| 154 | Item No. 26 Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 155 | For single ball air valve |
| 156 | SCHEME B GUJARWADI GSR |
| 157 | 1 Designing (aesthetically), and constructingRCCelevatedservice reservoirsoffollowingcapacitywith RCCstagingconsistingofcolumns, internalandexternalbracingsspaced verticallynotmore than4.5 metres centre to centre for ESR having capacityupto500cumandnotmore than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compoundtotheinsidefaceofthe containerincludingrefillingdisposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypassarrangements asper departmental design, providing andfixingaccessoriessuchasM.S. ladder, C.I. manhole frame and covers, waterlevelindicators,lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair casefromgroundleveltorooflevel, M.S. grill gate of 2 M height with locking arrangementofapproveddesign,B.B. masonry chambers for all valves, ventilatingshafts,providingand applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti- termite treatment for underground parts ofthestructureandgivingsatisfactory watertightnesstestasperI.S.code. The job to include painting the name of theschemeandotherdetailsonthe reservoir as per the directions of Engineer-in-Charge. |
| 158 | The design of the structure be in accordancewithrelevantI.S. specification (I.S. 3370 - 1965 orrevised.) |
| 159 | The design shall satisfy the stipulations as per I.S. 1893 - 1984 and I.S. 13920 / 1993 for seismic force and I.S. - 11682 /1985forR.C.C.stagingofoverhead tanks. |
| 160 | Fordesignhavingmorethan6 columns, provision of internal bracing is obligatory.External bracings is also obligatory. |
| 161 | TheentirestructureshallbeinM-300 mix only. |
| 162 | Plain round mild steel bars grade-I conformingtoI.S.432part-Iorhigh yieldstrengthdeformedbars conformingtoI.S.1786orI.S.1139 shallbeused,grade-IImildsteelbars will not be allowed. |
| 163 | Irrespectiveofthetypeoffoundation proposedinthedesign,onesetof bracing be provided at the ground level. |
| 164 | These rates include providing M.S. ladderforE.S.R.supto2lakhlitres capacityandprovidingspiralstaircase for E.S.R. above 2 lakh litres capacity. |
| 165 | Staging shall have to be designed with stressesofM-200concreteforESR. HoweverallRCCconstructionshould be done in M-300. |
| 166 | Theseratesareincludingthecostof uplift pressureifany andentire dewatering during execution. In case of water logging area where water is stretch at shallow depth, extra provision of dewatering shall be made as per site condition. |
| 167 | All conditions given in the Member Secretary\"sCircularNo.MJP/TS-I/ 350/1668dt.2-8-97andMJP/S-I/ 350/ 2127dt. 13-7-99shall bestrictly followed and additional cost, if any, due totheseconditionsisincludedinthe rates mentioned below. |
| 168 | For RCC 3000 Litrs |
| 169 | 2 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below |
| 170 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 171 | 3 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 172 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 173 | 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 174 | 65 mm sluice valves - PN -1.0 |
| 175 | 5 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 176 | Double flanged specials of all diameters |
| 177 | SCHEME B GUJARWADI DISTRIBUTION |
| 178 | Item No. 1 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note: One coupler shall be provided with each full length of pipe cost of which is included in rates below. |
| 179 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 180 | Item No. 2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 181 | Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form |
| 182 | 63 mm dia HDPE PN 6 Pipes |
| 183 | Item No. 3 10% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 184 | Item No. 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 185 | Sluice valves 50 mm Dia |
| 186 | Item No. 5 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without bypass arrangement |
| 187 | Sluice valves 50 mm Dia forWashout |
| 188 | Item No. 6 Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 189 | Air Valve 25 mm Dia |
| 190 | Item No. 7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) |
| 191 | Earth Soils |
| 192 | Item No. 8 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) |
| 193 | HMB |
| 194 | Item No. 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 195 | Soft Rock |
| 196 | Item No. 10 Excavation in laterite rock masses mechanically, including lift upto 1.5 M including trimming and levelling the bed removing the excavated material upto a distance of 50 metres beyond the area andlift as below stacking by as directed by Engineer-in-charge, normal dewatering excluding backfilling, etc. complete. |
| 197 | Laterite Rock |
| 198 | Item No. 11 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 199 | Item No. 12 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 200 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 201 | Item No. 13 Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 202 | 63 mm dia HDPE PN 6 Pipes |
| 203 | Item No. 14 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 204 | Sluice valves 50 mm Dia |
| 205 | Item No. 15 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 206 | Sluice valves 50 mm Dia forWashout |
| 207 | Item No. 16 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) |
| 208 | Air valves 25 mm Dia |
| 209 | Item No. 17 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) |
| 210 | Foundation on Murum and Harder Strata. |
| 211 | upto 150mm |
| 212 | Item No. 18 Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) |
| 213 | Item No. 19 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. |
| 214 | As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 215 | Item No. 20 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. complete |
| 216 | Item No. 21 HydraulictestingofG.I.pipelinetospecifiedpressure includingcostofallmaterialsandlabourandwaterfor testingforthelengthupto1kmusingreciprocatingtype pumpswhichshouldbeabletoprovidespecifiedtest pressure gauges and other necessary equipments,labour operationchargesetc.requiredfortesting,Therates underthisitemshallalsoincludecostofretestingif necessary and reinstating to original postion. |
| 217 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 218 | Item No. 22 Hydraulic testing of H. D. P. E./ M. D. P. E./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 219 | 63 mm dia HDPE PN 6 Pipes |
| 220 | Item No. 23 Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 221 | For single ball air valve |
| 222 | SCHEME B GUJARWADI MISC |
| 223 | Item No. 1 Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB rule |
| 224 | SCHEME C BOUDHAWADI DISTRIBUTION |
| 225 | Item No. 1Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note: One coupler shall be provided with each full length of pipe cost of which is included in rates below. |
| 226 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 227 | Item No. 2Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 228 | Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form |
| 229 | 63 mm dia HDPE PN 6 Pipes |
| 230 | Item No. 3 10% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 231 | Item No. 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 232 | Sluice valves 50 mm Dia |
| 233 | Item No. 5 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without bypass arrangement |
| 234 | Sluice valves 50 mm Dia forWashout |
| 235 | Item No. 6 Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 236 | Air Valve 25 mm Dia |
| 237 | Item No. 7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) |
| 238 | Earth Soils |
| 239 | Item No. 8 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) |
| 240 | HMB |
| 241 | Item No. 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 242 | Soft Rock |
| 243 | Item No. 10 Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) |
| 244 | Hard Rock |
| 245 | Item No. 11 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 246 | Item No. 12 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 247 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 248 | Item No. 13 Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 249 | 63 mm dia HDPE PN 6 Pipes |
| 250 | Item No. 14 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 251 | Sluice Valve 65 mm Dia |
| 252 | Item No. 15 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 253 | Sluice valves 50 mm Dia forWashout |
| 254 | Item No. 16 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) |
| 255 | Air valves 25 mm Dia |
| 256 | Item No. 17 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) |
| 257 | Foundation on Murum and Harder Strata. |
| 258 | upto 150mm |
| 259 | Item No. 18 Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) |
| 260 | Item No. 19 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. |
| 261 | Item No. 20 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. complete |
| 262 | Item No. 21 HydraulictestingofG.I.pipelinetospecifiedpressure includingcostofallmaterialsandlabourandwaterfor testingforthelengthupto1kmusingreciprocatingtype pumpswhichshouldbeabletoprovidespecifiedtest pressure gauges and other necessary equipments,labour operationchargesetc.requiredfortesting,Therates underthisitemshallalsoincludecostofretestingif necessary and reinstating to original postion. |
| 263 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 264 | Item No. 22 Hydraulic testing of H. D. P. E./ M. D. P. E./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 265 | 63 mm dia HDPE PN 6 Pipes |
| 266 | Item No. 23 Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 267 | For single ball air valve |
| 268 | SCHEME C BOUDHAWADI MISC |
| 269 | Item No. 1 Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB rule |
| 270 | SCHEME D VARACHIWADI PUMPING MACHINERY |
| 271 | Item No. 1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. |
| 272 | Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages |
| 273 | 2.00 BHP PUMPSET |
| 274 | Item No. 2 Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. |
| 275 | 3 core 10sqmm |
| 276 | Item No. 3 Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380-440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 277 | < 7.5 HP |
| 278 | Item No.4 Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for < 7.5 HP pump etc.complete. (Market rate) |
| 279 | Item No.5 Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. |
| 280 | Pressure gauge (100 mm dia) |
| 281 | Item No. 6 Providing tools for pumping. |
| 282 | Item No. 7 Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) |
| 283 | Item No. 8 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 284 | SCHEME D VARACHIWADI GSR |
| 285 | 1 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) |
| 286 | 2 Providing and casting in situ C.C. of trap / granite / gneiss metal of approved quality for P.C.C. works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, from work, compaction, finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curing etc. complete.( Excluding Reinforcement.) M:150 |
| 287 | 3 Providing laterite stone masonary in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. |
| 288 | 4 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 289 | 5 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above1000 to 20,000 litres |
| 290 | 6 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below |
| 291 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 292 | 7 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 293 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 294 | 8 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 295 | 65 mm sluice valves - PN -1.0 |
| 296 | 9 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 297 | Double flanged specials of all diameters |
| 298 | SCHEME D VARACHIWADI DISTRIBUTION |
| 299 | Item No. 1 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note: One coupler shall be provided with each full length of pipe cost of which is included in rates below. |
| 300 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 301 | Item No. 2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 302 | Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form |
| 303 | 63 mm dia HDPE PN 6 Pipes |
| 304 | Item No. 3 10% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 305 | Item No. 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 306 | Sluice valves 50 mm Dia |
| 307 | Item No. 5 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without bypass arrangement |
| 308 | Sluice valves 50 mm Dia forWashout |
| 309 | Item No. 6 Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 310 | Air Valve 25 mm Dia |
| 311 | Item No. 7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) |
| 312 | Earth Soils |
| 313 | Item No. 8 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) |
| 314 | HMB |
| 315 | Item No. 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 316 | Soft Rock |
| 317 | Item No. 10 Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) |
| 318 | Hard Rock |
| 319 | Item No. 11 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 320 | Item No. 12 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 321 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 322 | Item No. 12 Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 323 | 63 mm dia HDPE PN 6 Pipes |
| 324 | Item No. 13 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 325 | Sluice Valve 65 mm Dia |
| 326 | Item No. 14 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 327 | Sluice valves 50 mm Dia forWashout |
| 328 | Item No. 15 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) |
| 329 | Air valves 25 mm Dia |
| 330 | Item No. 16 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) |
| 331 | Foundation on Murum and Harder Strata. |
| 332 | upto 150mm |
| 333 | Item No. 17 Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) |
| 334 | Item No. 18 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. |
| 335 | As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 336 | Item No. 19 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. complete |
| 337 | Item No. 20 HydraulictestingofG.I.pipelinetospecifiedpressure includingcostofallmaterialsandlabourandwaterfor testingforthelengthupto1kmusingreciprocatingtype pumpswhichshouldbeabletoprovidespecifiedtest pressure gauges and other necessary equipments,labour operationchargesetc.requiredfortesting,Therates underthisitemshallalsoincludecostofretestingif necessary and reinstating to original postion. |
| 338 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 339 | Item No. 21 Hydraulic testing of H. D. P. E./ M. D. P. E./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 340 | 63 mm dia HDPE PN 6 Pipes |
| 341 | Item No. 22 Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 342 | For single ball air valve |
| 343 | SCHEME D VARACHIWADI MISC |
| 344 | Item No. 1 Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB rule |
| 345 | SCHEME E KONDWADI PU,PING MACHINERY |
| 346 | Item No. 1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. |
| 347 | Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages |
| 348 | 2.00 BHP PUMPSET |
| 349 | Item No. 2Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. |
| 350 | 3 core 10sqmm |
| 351 | Item No. 3Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380-440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 352 | < 7.5 HP |
| 353 | Item No.4Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for < 7.5 HP pump etc.complete. (Market rate) |
| 354 | Item No.5Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. |
| 355 | Pressure gauge (100 mm dia) |
| 356 | Item No. 6Providing tools for pumping. |
| 357 | Item No. 7Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) |
| 358 | Item No. 8Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 359 | SCHEME E KONDWADI GSR |
| 360 | 1 Designing (aesthetically), and constructingRCCgroundservice reservoirs / RCC sumps in M-300 mix of requiredcapacityincludingexcavationin alltypesofstrata,foundationconcrete, container walls, bottom slab top RCC roof slab/ordome,20mmthick cement plasterwithwaterproofingcompoundin CM1:3proportiontoinsidefaceofthe container, including epoxy paint from insideincludingrefillinganddisposingof surplus stuff within lead of 50 M, all labour and material charges, for laying and jointingofpipeassemblyforinlet,outlet washout, over flow and bypass arrangementconsistingofC.I.M.S.D/F. pipes, specials and valves of given diameters,providingandfixing accessoriessuchasM.S.ladderinside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamberforallvalves,ventilatingshafts, including giving satisfactory hydraulictest andwatertightnesstestasperIScode and providing three coats of cement paints to all exposed surface of structure including roof surface etc. complete as per designdata,criteria,obligatory requirementsanddetailedspecifications. Anti-termitetreatmentshallbegivenfor underground portion of the structure. |
| 361 | Thedesignshallbeinaccordancewith various relevant I.S. specification (I.S. 456/1978, I.S. 875 - 1987, I.S. 3370 -1965or revised.) |
| 362 | Only M.S. bars grade I conforming to I.S. 432 part-I or high yield strength deformed bars conforming to I.S. 1786 or I.S. 1139 shallbeused.Grade-IIM.S.barsshall not be used. |
| 363 | Entire structure shall be in M-300 only. |
| 364 | The scope of pipe assembly work shall be upto5metrebeyondoutsidefaceofthe wall,costofpipesvalvesand specialsis not included in the rate but labour cost for laying and jointing is included. |
| 365 | TheG.S.R./Sumpabove15lakhlitres capacity shall be in two compartment. |
| 366 | TheJobincludesdesigningthestructure for uplift pressure and dewatering if required during entire execution and disposalofsurplusexcavatedstuffwithin lead of 50 metres as directed by Engineer- in-charge.Ifupliftsconsideredindesign, thentheseratesshallbeincreasedby 7.5%. |
| 367 | G.S.R. outlets shall be with bell mouth of approved pattern in bottom slab and cost ofdesigning bell mouth isincluded in the rate. Sump well includes cost of suction pit required at bottom. |
| 368 | Forpipediametersupto300mmonly CI pipesandCIspecialsshallbeused.For pipe diameters above 300 mm, M.S. pipes andspecialsminimum10mmthickshall beusedwithproperanticorrosiveepoxy treatment from inside and outside. |
| 369 | Costofpumphouseisnotincludedin these rates. |
| 370 | AboveratesareapplicableforSeismic Zones 2, 3 and 4. |
| 371 | for rcc 5000 lit |
| 372 | 2 Providing and casting in situ C.C. of trap / granite / gneiss metal of approved quality for P.C.C. works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, from work, compaction, finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curing etc. complete.( Excluding Reinforcement.) M:150 |
| 373 | 3 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. |
| 374 | 4 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below |
| 375 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 376 | 5 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 377 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 378 | 6 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 379 | 65 mm sluice valves - PN -1.0 |
| 380 | Item No :- 7 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 381 | Double flanged specials of all diameters |
| 382 | SCHEME E KONDWADI DISTRIBUTION |
| 383 | Item No. 1 Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note: One coupler shall be provided with each full length of pipe cost of which is included in rates below. |
| 384 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 385 | Item No. 2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 386 | Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form |
| 387 | 63 mm dia HDPE PN 6 Pipes |
| 388 | Item No. 3 10% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 389 | Item No. 4 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete |
| 390 | Sluice valves 50 mm Dia |
| 391 | Item No. 5 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without bypass arrangement |
| 392 | Sluice valves 50 mm Dia forWashout |
| 393 | Item No. 6 Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 394 | Air Valve 25 mm Dia |
| 395 | Item No. 7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) |
| 396 | Earth Soils |
| 397 | Item No. 8 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) |
| 398 | HMB |
| 399 | Item No. 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 400 | Soft Rock |
| 401 | Item No. 10 Excavation for foundation / pipe trenches in hard rock by controlled Chiselling, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) |
| 402 | Hard Rock |
| 403 | Item No. 11 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 404 | Item No. 12 LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. |
| 405 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 406 | Item No. 13 Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 407 | 63 mm dia HDPE PN 6 Pipes |
| 408 | Item No. 14 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 409 | Sluice Valve 65 mm Dia |
| 410 | Item No. 15 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 411 | Sluice valves 50 mm Dia forWashout |
| 412 | Item No. 16 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) |
| 413 | Air valves 25 mm Dia |
| 414 | Item No. 17 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) |
| 415 | Foundation on Murum and Harder Strata. |
| 416 | upto 150mm |
| 417 | Item No. 18 Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) |
| 418 | Item No. 19 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. |
| 419 | As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 420 | Item No. 20 Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. complete |
| 421 | Item No. 21 HydraulictestingofG.I.pipelinetospecifiedpressure includingcostofallmaterialsandlabourandwaterfor testingforthelengthupto1kmusingreciprocatingtype pumpswhichshouldbeabletoprovidespecifiedtest pressure gauges and other necessary equipments,labour operationchargesetc.requiredfortesting,Therates underthisitemshallalsoincludecostofretestingif necessary and reinstating to original postion. |
| 422 | GI Pipe 50 mm Dia M Class 5.16 kg/m |
| 423 | Item No. 22 Hydraulic testing of H. D. P. E./ M. D. P. E./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 424 | 63 mm dia HDPE PN 6 Pipes |
| 425 | Item No. 23 Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 426 | For single ball air valve |
| 427 | SCHEME E KONDWADI MISC |
| 428 | Item No. 1 Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB rule |
| 429 | GST |
AI Tender Summary
Tender Timeline
Sep 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 29, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender