![https://www.tenderdetail.com Tender Details](/Content/img/TenderDetail.png)
![Tender Detail](/Content/img/TenderDetail.png)
Zilla Parishad-ZP has published Installation Of Solar Light With Pole Spv Module Li Battery Etc 8 Nos At Different Places Of Mouza Under Dinhata Villageii Gp Within Dinhata I Block Activity Code No 52099361. Submission Date for this Tender is 27-09-2022. Dry Cell Batteries Tenders in dinhata West Bengal. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply & Erection of single steel tubular pole of 6.0 mtr long in cc foundation (proportion and dlmention indicates bellow), having 600 x 600 x150 m thick cc (4:2:1) base block bellow sole plate/pole with hard jhama metal including cc(6:3:1) muffing 0.30 mtr. dia and 0.30 m above ground level including 3 mm thick neat cement ted finish and GI Earth bolt after making holes etc. on the pole (Including carriage etc complete). (Bajaj make) |
2 | Extra above for providing cc (6:2:1) baseblock (around the pole ) dimention 0.60 x 0.60 x0.75 mtr above ground level. Neat cemented finish (3mm thick) at the base pole (in lieu of cc muffing ) lncl . Providing drilled hole in the pole suitable for alkathine / polythine pipe as directed for street light wiring. |
3 | S & F single arm header assembly 300 mm long 80 mm dia GI pipe welded with 1.5 mtr long 40 mm dia and ms angle iron frame of 35 x 35 x 5 mm for photovoltic panel with nece. Nuts and bolt and pamting incl. S&F necessary copper wire. |
4 | Supply and installation of SPV moduleshould be used. The PV module should have crystallne silicon solar cells and must have a certificate of testing conforming to IEC 61215 Edition II/BIS14286 The power out put of the modules under STC should minimum of 75/80 wp at a load voltage of 16.4+-0.2( Havells/Philips/HPL) |
5 | Supply & fixing charge controller unit. The total electronic efficiency should be at least 85% ELECTRONICS SHOULDOPERATE AT 12 V and should have temp Compensation for proper changing of the battery throught the year No load current consumptlon should be lessthen 40 mA. The PV module self should be used to sense the ambient light level for switching ON and OFF the lamp.The PCB containing the electronics should be capable of solder free installation & replacement necy lengthsof wire/cables,switch. ( Havells/Bajaj/HPL) |
6 | Earthing with 50 mm dia GI iron pipe 3.04 mtr long and 1 x 4 SWG GI wire (1 mtr long) 13 mm x 80 mm dia bolt double nuts washers incl. S & F 15mm dia GI pipe protection. |
7 | Supply and installation of Li BATTERY type.The battery will have a minimum rating of 12V/100 Ah at C/10 discharge rate 3.75% ofthe rated capacity the battery shouldconfirm to the latest BIS international standerds or lithium log PO4 (12V). ( Exide/ HPL make ) |
8 | Supply and fixing on existing headerassembly LED street light luminales IP.55 Endura city liner Neo Havells make or HPL/Crompton or any approved catagory18 W LED. |
9 | Supply and fixing information sign board 500 x 300 mm. fabrication with M.S. Sheet 16 SWG and ISA Frame 25 x 25 x 4 mm. including paiting and lettering with approved paint as per instruction of authority. |
10 | 12% GST |
11 | Welface Cess 1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail