Bids Are Invited For Procurement Of Furniture For It Workshop Lab In Ece Disciplineand Bio Medical Engneering Lab Dr. Amarnath , Prof. Vk Gupta And Dr. Nihar Kumar Mahato And Primery Health Centre At Pdpm Iiitdm Jabalpur----NS-1 Supply and installation , Jabalpur-Madhya Pradesh

Bids Are Invited For Procurement Of Furniture For It Workshop Lab In Ece Disciplineand Bio Medical Engneering Lab Dr. Amarnath , Prof. Vk Gupta And Dr. Nihar Kumar Mahato And Primery Health Centre At Pdpm Iiitdm Jabalpur----NS-1 Supply and installation of open plan office system with partition panel Height 1200mm rectangular work top size of 900mm(W)x 600mm (D) the work top height 750mm & partition thickness 52 mm including powder coated aluminium trims.Tiles: Combination of top tiles are tiles - prelam. Bottom tiles - prelam. INTERMEDIATE BLOCKS Intermediate blocks are given in DL finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding ,with .KBPT-Metal KBPT Size - 460 X 200 mm Made of – CRCA and CPU Trolley for CPU. Execute cluster of 4 seater back to back module Nos 56 Ns-2 Supply and installation of MID BACK REVOLVING CHAIR having SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm. thick hotpressed plywood, upholstered with changeable fabric upholstery covers and moulded Polyurethane foam, together with seat and back cover. The back foam is designed with contoured lumbar support for extra comfort. Back SIZE: 39.0cm. (W) X 47.0cm. (H), SEAT SIZE: 45.0cm. (W) X 52.0cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. ARMRESTS: The armrests are made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The P.U.armrests are then fixed to black powder coated armrest brackets made of 0.5cm.thk. HR steel fitted with claddings made of injection moulded Polypropylene. Approx. size of the armrest is 21.0cm. (L) X 6.4(W). PERMANENT CONTACT MECHANISM: The permanent contact mechanism is designed with the following features: 360° revolving type. 14° maximum back-tilt only. Upright position locking. Tilt tension adjustment. SPINE COVER: The spine cover is injection moulded in black co-polymer Polypropylene. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.2cm. Thick CR steel, powder coated and fitted with an injection moulded black Polypropylene hub cap and 5 nos. twin wheel castors.(castor wheel dia. 5.0cm.) The pedestal is 60.0cm. Pitchcentre dia. (70.0 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. as per approved by engineer In-charge Nos 58 Name of work:- Procurement of Furniture for IT workshop Lab in ECE disciplineand bio medical engneering lab Dr. Amarnath ,Prof. VK Gupta and Dr. Nihar Kumar Mahato and primery health centre at PDPM IIITDM Jabalpur. Ns-3 Supply and installation of Executive High back Chair of The Chair should be tested on BIFMA standards with Seat Slide for All Division Incharge with High BACK SIZE: 51.6 cm. (W) x 75.2 cm. (H)- SEAT/BACK ASSEMBLY to be made up of 1.2 ± 0.1cm thk. hot pressed plywood upholstered with knitted fabric ,over moulded High Resilience Polyurethane foam.SEAT SIZE should be 49.0 cm. (W) x 51.4 cm. (D).The HR polyurethane foam should moulded with density = 55+/-2 kg/m3 and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. The adjustable armrest shall have following features :· - Up-Down adjustment– 8 steps (8.0±0.5 cm range) - Height adjustable armrest structure which is powder coated & fitted with an armrest top. - Fixed Armrest Top is PU molded over metal insert. Chair should have FRONT PIVOT SYNCHRO MECHANISM with following features -· 360° revolving type.· Single point control.· Front-pivot for tilt with feet resting on ground ensuring more comfort. · Tilt tension adjustment.· 4-position locking with anti-shock feature.· Seat/back tilting ratio of 1:2.Chair Back can be adjusted in 5 positions manually.Stroke of height adjustable spines hall be 7 cm. Chair should have PEDESTAL ASSEMBLY WITH CASTORS which shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is Ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. with castors).Seat can be slide horizontaly as per user convienience. Stroke of seat slide shall be 4 cm- 5 cm. Nos. 5 Ns-4 Supply and installation of Executive Visitors Chair of , The Chair should be tested on BIFMA Standards without Slide forAll Division Incharge with WIDTH (W) : 57.5 CM;DEPTH (D) : 58.2 CM; HEIGHT (H) : 100.8 CM . SEAT HEIGHT (SH) : 47.0 CM with hot pressed plywood upholstered with knitted fabric ,over moulded High Resilience Polyurethane foam.SEAT SIZE should be 49.0 cm. (W) x 51.4 cm. (D).The HR polyurethane foam should moulded with density = 55+/-2 kg/m3 and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. Visitor Chair should have TUBULAR VISITOR FRAME which shall be powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W Tube with a connecting M.S. Spine welded to it. Back spine shall be fitted to the frame assembly.· Fixed Armrest Top shall be PU molded over metal insert. Nos. 11 Ns-5 Supply and installation of Table - size shall be 1199mm Width x 590mm Depth x 735mm Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.

Refer document

INR 40873.0 /-

INR 20.43 Lakhs /-