|
| 1 | CIVIL WORK |
| 2 | 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | 14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. andrefixing of repaired door shutters to existing door frames, including replacementof hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 4 | 15.31 Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 5 | Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ). |
| 6 | Providing and fixing 0.80mm thick Aluminium Sheet on existing frames using with nails/screws
including 150mm over laps, all cutting charges, all labour charges, all conveyance all leads and lifts etc.
complete as per the Directions of Engineers at site. |
| 7 | Supplying and Fixing 8mm thick toughened Galss pan on wooden frame aleady fixed |
| 8 | 9.63.1 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:250x10 mm |
| 9 | Providing & fixing on roof pressed clay tile(Mangalor pattern tile of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame work complete (Using
Departmental tile) |
| 10 | 12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) |
| 11 | 50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 12 | 15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 13 | 12.26.1 Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :6 mm thick cement board |
| 14 | 50.12.2.5 Providing & fixing Poly carbonate multi wall plain sheet 8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55mm) with EPDM seal complete upto any pitch in horizontal /vertical / curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. |
| 15 | 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 16 | Providing and fixing half pedestal wash basin Jaquar model no. CNS-WHT-305 with waste pipe ofstandard pattern, including fittings and brackets, cutting and making good the walls whereverrequired.The rate includes all material labour charge conveyance etc |
| 17 | Dismantling wash basin PVC pipes exposed on wall including disposal of dismantled materials allcomplete as per directions of Engineer in charge. |
| 18 | Providing and fixing of new mirror of required size 1.2*0.6 6 mm thick approved quality of modi float/equivalent including all labour charges etc |
| 19 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to bespecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | 50.18.8.3.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This other Engineering Organisations includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 |
| 21 | 50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 |
| 22 | 50.18.9.6.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 |
| 23 | 50.18.9.7.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2 |
| 24 | Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2 |
| 25 | Supplying and fixing 5\"\" brass hinges for main door including screws the rate including all material cost labour charge etc completed |
| 26 | Supply and fitting Godrej Premium Cylindrical lock (Brass) including all cost conveyance and labourcharges etc completed |
| 27 | Providing corrugated 0.35mm Galvanized iron trafford sheet roofing including vertical/curved surface fixed with self tapping steel screws 6mm dia with bitumen and GI limpet washers complete(up to any pitch which in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 28 | 13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 29 | Providing stainless steel wire mesh to prevent the entry of mosquitoes, flies, birds etc through the opening above wall plate and roof truss including all materals, labour, conveyances etc complete |
| 30 | Supplying and fixing Quarter Turn pillar Cock (JAQUAR) or equivalent of approved quality including cost, fixing charges etc complete (Model no:OPP-15001PM) |
| 31 | CEILING WORK |
| 32 | 12.58.1 Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long space between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening of services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 Kg/ sq. cm, bending strength 100 Kg/sq. cm, of size 595x595 mm, having perforation of dia, 10 mm with minimum perforated area 18% with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50mm thick rockwool of 48 Kg/cum backing. |
| 33 | PAINTING WORK |
| 34 | 13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 35 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 36 | 13.114 Melamine polishing on wood work (one or more coat). |
| 37 | 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 38 | 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 39 | 13.98.1 Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One or more coats on old work |
| 40 | 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :One or more coats on old work |
| 41 | INTERIOR FURNISHING |
| 42 | Fabricating and supplying of Dinning table (Main block) of size 90X90x75 cm by using Marine grade ply 710 grade having approved Italian Marble of 18mm thick on top and edge including edge moulding, 1mm laminate, wooden lipping, legs are made with GI sections as per the design and drawings. The rate includes all materials labours charges, conveyance etc complete. |
| 43 | Fabricating and supplying of Dinning table(Main block) of size 180X90x75 cm by using Marine ply 710grade having approved Italian Marble of 18mm thick on top and edge including edge moulding1mm laminate wooden lipping Legs are made with GI sections as per the disign and drawings. The rates includes all materials labour charges conveyance etc complete. |
| 44 | Fabricating and supplying of Dinning chairs (Main block) by using Marine ply 710 grade Seating and back rest are finish with fabric of approved shade legs are made with copper finish SS as per the design and drawings. The rates includes all materials labour charges conveyance etc complete. |
| 45 | Supply and installation of globe decor by using MDF with PU paint finish as per the specification and drawing.The rate includes all the materials labour charges and conveyance etc. complete. |
| 46 | Fabricating and supplying of round table (Main block first floor )by using 12mm toughened glass, legs are made with GI sections as per the design and drawings.The rate includes all materials ,labour charges, conveyance ,etc .complete. |
| 47 | fabricating and supplying of Tub chair (Main block first floor)by using marine plywood 710 grade ,fabric finish of approved shade ,wooden legs with pu polish as per the design and drawings .The rate includes all material, labour charges ,conveyance ,etc.complete. |
| 48 | Fabricating and supplying of Bar chairs(Main block) by using Marine grade ply 710 grade, Seating and back rest are finish with fabric of approved shade Legs are made with hardwood with PU paint finish as per the design and drawings. The rate includes all material labour charges conveyance etc. |
| 49 | Fabricating and supplying of 2 seater sofa (main block) by using Marine grade Ply 710 grade Seating and back rest are finish with fabric of approved shade, as per the design and drawings. The rate includes all material, labour charges conveyance etc Complete. |
| 50 | Fabricating and supplying of 3 seater sofa (main block) by using Marine grade Ply 710 grade Seating and back rest are finish with fabric of approved shade, as per the design and drawings. The rate includes all material, labour charges conveyance etc Complete. |
| 51 | Fabricating and supplying of chairs (Out door area) as per the drawing. The rate includes all material,labour charges conveyance etc Complete |
| 52 | Fabricating and supplying of Bar chairs (Out door area) as per the drawing. The rate includes all material, labour charges conveyance etc Complete. |
| 53 | Supply & installation of table of size 120X60X75cm for Out door area by using industrial frames,dec wood paneling over industrial frames as per the drawing. The rate includes all material, labour charges conveyance etc Complete. |
| 54 | Supply & installation of Bar table Out door area by using industrial frames,dec wood paneling over industrial frames as per the drawing. The rate includes all material, labour charges conveyance etc Complete. |
| 55 | Fabricating and supplying of Bar chairs (Adjacent block FF ) by using Marine grade Ply 710 grade Seating and back rest are finish with fabric of approved shade,Legs are made with hardwood with PU paint finish as per the design and drawings. The rate includes all material, labour charges conveyance etc Complete. |
| 56 | Supply & installation of Round Side table adjacent block FF by using Marine grade ply 710 grade, laminates finishes as per the drawing. The rate includes all material, labour charges conveyance etc Complete. |
| 57 | Supply & installation of designer shelf at adjacent block FF by using Marine grade ply 710 grade, laminates finishes, industrial patterns etc as per the drawing. Thr rate includes all material, labour charges conveyance etc Complete. |
| 58 | Fabricating and supplying of single seater sofa (Adjacent block FF ) by using Marine grade Ply 710 grade Seating and back rest are finish with fabric of approved shade, as per the design and drawings. The rate includes all material, labour charges conveyance etc Complete. |
| 59 | Fabricating and supplying of 2 seater sofa (Adjacent block FF )by using Marine grade Ply 710 grade Seating and back rest are finish with fabric of approved shade, as per the design and drawings. The rate includes all material, labour charges conveyance etc Complete. |
| 60 | Fabricating and supplying of bar table (Main block ) of size225x50x100 cm by using Marine ply 710 grade marble top with edge moulding, 1mm laminates, wooden lipping, Legs are made with GI sections as per the design and drawings. The rate includes all material, labour charges conveyance etc Complete. |
| 61 | Fabricating and supplying of round table (Adjacent block first floor )by using 12mm toughened glass, legs are made with GI sections as per the design and drawings.The rate includes all materials ,labour charges, conveyance ,etc .complete. |
| 62 | Supply & installation of service counter overhead by using Marine grade ply 710 grade, laminatesfinishes, tile cladding, granite top, wooden reapers etc as per the drawing. The rate includes all thematerials labour charges and conveyance etc complete. |
| 63 | Supply & installation of service counter by using Marine grade ply 710 grade, laminates finishes, tilecladding, granite top, wooden reapers etc as per the drawing. The rate includes all the materials labour charges and conveyance etc complete. |
| 64 | Fabricating and supplying of round table (Main block) by using 12mm toughened glass, legs are made with GI sections as per the design and drawings.The rate includes all materials ,labour charges, conveyance ,etc .complete. |
| 65 | Supplying and installation of bar table Adjacent block first floor of required size by using industrial frames dec wood paneling over industrial frames as per the drawing. The rate includes all the materials labour charges and conveyance etc complete |
| 66 | ELECTRICAL WORKS |
| 67 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch,modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required. Group A |
| 68 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch,modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required. Group B |
| 69 | Two Point controlled by one one way switch |
| 70 | Three Point controlled by one one way switch |
| 71 | Four Point controlled by one one way switch |
| 72 | Five Point controlled by one one way switch |
| 73 | Six Point controlled by one one way switch |
| 74 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 75 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess,including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch,connection etc. as required. (For light plugs to be used in non residentialbuildings). |
| 76 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 77 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 78 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet |
| 79 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 80 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep |
| 81 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 82 | Supplying and fixing 3 module GI BOX with modular plate and cover in front on surface or in recess, including providing and fixing 3/5 pin 20 A modular socket outlets with 20 A modular switches, connection etc. as required. |
| 83 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2x1.5 sq.mm + 1x1.5 sq.mm earth wire. |
| 84 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 85 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. |
| 86 | Supply & providing 20mm size Capping / Casing of good quality. |
| 87 | Supply of 12W Decorative Hanging Light fittings working on 240V, 50 Hz AC supply. (Make:Classic Arts Lamps Model No:CL-HL-395 or equivalant) |
| 88 | Supply of Decorative 15W Light fittings working on 240V, 50 Hz AC supply.(Make:Classic Arts Lamps Model No:CL-HL-228 or equivalant) |
| 89 | Supply of Decorative Out door Light fittings working on 240V, 50 Hz AC supply.(Make:Aer Glo Lighting Model No Zane-ZP4322 Natural Cane or equivalant) |
| 90 | Supply of Decorative Wall Light fittings working on 240V, 50 Hz AC supply.(Make:Classic Arts Lamps Model No:CL-HL-398 or equivalant) |
| 91 | Supply of 20W LED tube fittings working on 240V, 50 Hz AC supply. |
| 92 | Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. |
| 93 | Supply of 250 mm 1300 rpm/60W medium Duty Exhaust working on 240V single phase A/C of good quality & approved make to the existing opening/ false ceiling, including making good the damages with 3C x1.5 sq. mm FR PVC insulated, copper conductor, flexible cable etc. as required. |
| 94 | Supply,conveyance,instalation,testing and commissioning of 300mm heavy Duty Exhaust working on 240V single phase A/C of good quality & approved make to the existing opening/ false ceiling, including making good the damages with 3C x1.5 sq. mm FR PVC insulated, copper conductor, flexible cable etc. as required. |
| 95 | Installation of exhaust fan in the existing opening, including making good the damage connection testing,commissioning etc. as required. Upto 450 mm sweep. |
| 96 | Supply & providing and fixing of 1200mm sweep 5 star rated Ceiling fan with all accessories including remote control of good quality & approved make, including wiring the down rods of standard length (upto 30 cm) with 3C x1.5 sq. mm FR PVC insulated, copper conductor, flexible cable etc. as required. (Make : Crompton aura or equivalent) |
| 97 | Supply & laying 4Cx 10 sq mm copper flexible power cable of 1.1 KV grade of following size cable through trench/wall/ ceiling. |
| 98 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 3.15 mm copper conductor ( 10 SWG) |
| 99 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator )6way, Double door |
| 100 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door |
| 101 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB\"s (butwithout MCB\"s and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.).8 way (4 + 24), Double door |
| 102 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 103 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 104 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 105 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole |
| 106 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 107 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required. 40 amps |
| 108 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 109 | Supply & providing GATE light fittings with B22 base suitable for Retrofit CFLs upto 20W for use on 230VAC Supply including all accessories required for fixing etc. complete of good quality and approved make. |
| 110 | Supply & providing of outdoor, weather & water proof 4.8W/m LED Strip lights of IP20 grade including suitable capacity Driver for use on 240V AC Supply including all accessories required for fixing etc. complete of good quality and approved make in the existing coves including Twintwisted plastic wire for lead interconnection etc. complete. |
| 111 | Supply,installation testing and commissioning of 50 W LED Green colour flood light including all accessories like clamps screws and standard length connection leads etc. required for fixing and working on 240V,50 Hz AC supply |
| 112 | Supply, installation, testing & commissioning of 12 W Round Concealed CEILING LED fittings including all the accessories like clamps,screws and standard length connection leads etc. required for fixing and working on 240 V, 50 Hz AC supply. |
| 113 | Supply and fixing of the 5W Surface LED fittings including suitable driver unit for use on 230V AC Supplyincluding all accessories required for fixing etc. complete of good quality and approved make. ( Make: Luker). |
| 114 | Supply and fixing of the 3W Spot LED Ceiling Concealed fittings including suitable driver unit for use on 230V AC Supply including all accessories required for fixing etc. complete of good quality and approved make. ( Make: Luker) |
| 115 | Supply and fixing of weather proof rectangular type sintex junction box. |
| 116 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 117 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 10 sq mm with factory made clamp. |
| 118 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp |
| 119 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq.mm (25 mm) |
| 120 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 121 | Supplying and fixing FP sheet steel enclosure IP65 on surface/ recess along with 40A 415 volts \"C\" curve FP MCB complete with connections, testing and commissioning etc. as required. |
| 122 | AC WORKS |
| 123 | Supply,installation, testing and commissioning of 2TR Inverter type High wall mounted 3 star or above rated Split Air Conditioner unit having copper condenser, stabilizer (V-Guard:-Model NoVG 500 or equivalent), cordless remote, outdoor stand etc. and all fixing accessories including fixing of Indoor & outdoor units,initial gas charging as per manufacturer\"s standards, giving power connection to nearest power plug point / MCS, connecting indoor and outdoor using hard drawn copper refrigerant pipes insulated with nitrile rubber of suitable thickness of length approximately 3 meters, PVC insulated flexible copper cable of length approximately 3 meters as per original manufacturer standards, necessary drain water line using 20 mm PVC pipe of length approx-imately 3 metres. Necessary opening on the wall shall be made for drawing refrigerant / power / drain lines and the same shall be restored to normal using cement plastering. (Drain pipe line shall be properly fixed and clamped to line and level as per the direction of site engineer incharge). Make:-Daikin,Carrier,Bluestar or Equivalent) |
| 124 | Supply,installation, testing and commissioning of 3TR high wall mounted split AC unit with Cordless remote including fixing of Indoor & Outdoor units, initial gas charging as per manufacturer standard, giving power connection to nearest Power plug point / MCB, connecting indoor and outdoor units using hard drawn copper refrigerant pipes insulated with nitrile rubber or equivalent material. Necessary opening on the wall shall be made for drawing refrigerant / power / drain lines and shall be restored to normal using cement plastering . (Drain pipe line shall be properly fixed and clamped to line and level as per the direction of site engineer in charge).Make: BlueStar/voltas/LG/Lloyd/Panasonic or equivalent. 2TR Capacity or nearest higher size working on 3 Phase, 415 V, 50 Hz +/-1% AC Supply. |
| 125 | Supply,installation, testing and commissioning of 3TR high wall mounted split AC unit with Cordless remote including fixing of Indoor & Outdoor units, initial gas charging as per manufacturer standard, giving power connection to nearest Power plug point / MCB, connecting indoor and outdoor units using hard drawn copper refrigerant pipes insulated with nitrile rubber or equivalent material. Necessary opening on the wall shall be made for drawing refrigerant / power / drain lines and shall be restored to normal using cement plastering . (Drain pipe line shall be properly fixed and clamped to line and level as per the direction of site engineer in charge).Make:BlueStar/voltas/LG/Lloyd/Panasonic or equivalent. 2TR Capacity or nearest higher size working on 3 Phase, 415 V, 50 Hz +/-1% AC Supply. |
| 126 | Supply & providing of additional hard drawn copper refrigerant pipe for 2TR AC of required size as per manufacturer\"s standard with 13mm thick nitrile rubber thermal insulation. (suction/ liquid line will not be measured separately). |
| 127 | Supply & providing refrigerant lines (Liquid and Discharge) for2.5/ 3TR A/C using hard drawn copper pipe of the sizes recommended by the manufacturer including suitable thickness nitrile rubber thermal insulation of good quality to extend the refrigerant gas connection till outdoor unit as required at site. |
| 128 | Supply and laying additional control cable of required size for AC unit as per manufacturer\"s standard of good quality and reputed brand. |
| 129 | Supply & fixing of 25 mm dia pvc drain pipe with proper insulation with u trap. |
