Retrofitting To Pipe Water Supply Scheme At Ambavane Kh Tal. Mandangad Dist. Ratnagir
Tender Value
19.45 Lakhs
Estimated cost
Bid Submission
22 Sep 2022
0 days left
EMD
19458
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mandangad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retrofitting To Pipe Water Supply Scheme At Ambavane Kh Tal. Mandangad Dist. Ratnagir
BOQ
| Sl. No. | Item Description |
| 1 | ESTIMATE NO. 1- Rising Main |
| 2 | Item No.1 -Providing & supplying in standard lengths polyethelene Pipes, conforming to IS 4984 with necessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint, including all local & central taxes, transportation and freight charges inspection charges, loading/unloading charges, conveyance to the departmental stores/ site & stacking the same in closed shade duely protecting from sunrays & rains, etc. |
| 3 | 75 mm dia HDPE Pipe 10kg/cm2 |
| 4 | Item No.2-Providng and supplying Idouble flangeSluice valvesconfirming for IS 2906/14846 including worn gear arrangement as per test pressurestainless steel spindle, caps including all taxes transportation etc.complete. |
| 5 | 50mmdia sluice valve PN-1 |
| 6 | Item No.3- Providing and supplying Air Valves as per IS- 14845-2000 and MJP\"s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 7 | 25mmDia Air Valve PN-1 |
| 8 | Item No.4- Providing and supplying ISI mark CI D/F reflux valves (non-return valve) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves asper IS 5312 Part I(1984) |
| 9 | Without by pass arrangement-PN-1(NON-RETURN VALVE) - 80mm |
| 10 | B) Labour Section |
| 11 | Item No 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 12 | Item No 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 13 | Item no.3:-Excavation for foundation / pipe trenches in hard rock by controlled blasting including trimming and levelling the bed by chiselling where necessary & removing the excavated material & stacking it in measu-rable heaps,within a distance of 50 m. |
| 14 | Item No.4- Lowering laying & jointing H.D.P.E. Pipe by heating to the ends of pipe with the help of tefflon coated electrimirror/heater to the required temparature & then pressing the end together against each other to form a monolithic & leak proof joint by thermosetting process. the pressing may be required to be done with Jack/Hydraulicjack/Vutt fusion machine etc. complete. with all maerial,labours as directed by Engineer in charge including given satisfacory hydraulic test. |
| 15 | 75 mm dia HDPE pipe 10kg/cm2 |
| 16 | Item No.5-Hydraulic testing of H.D.P.E. Pipe to specified pressure including cost of all materials and labourand water for testing for specified length incluiding cutting placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to providespecified test pressure gauges and other necessary equipments, labour, operation charges, etc required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to origenal position. |
| 17 | 75 mm dia HDPE Pipe |
| 18 | Item No. 6- Lowering, laying and jointing in position following C.I.D./F. sluice valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. |
| 19 | 50 mmdia sluice valve PN-1 |
| 20 | Without by pass arrangement-PN-1(NON-RETURN VALVE) - 80mm |
| 21 | Item No.7- Giving satisfactory hydraulic testing of following C.I.D/F Reflex Valves, Butterfly valves and Sluice Valves. |
| 22 | 50 mmdia sluice valve PN-1 |
| 23 | Without by pass arrangement |
| 24 | Item No.8-Providing, supplying and fixing Air valves as per IS-10845 amd MJP\"s standard specifications of approved make and quality of following diameters including all taxes(central and local), railway freight, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/site, unloading, stacking etc.complete. |
| 25 | 25 MM Dia Air Valve |
| 26 | Item No.9:-Lowering laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in charge including cost of conveyance from storeto site of work cost of all material and giving satisfactory hydraulic testing etc.complete. (for all class of valve.) |
| 27 | 25 MM Dia Air valve single ball |
| 28 | Item No.10-Providing & fixing in position M.S. .Air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting n M - 150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement etc.complete as directed by Engineer in charge. |
| 29 | Item No.11-Providing and laying in situ cement concrete mortar 1:2:4 of trap metal for foundation and bedding including bailing out water manually formwork compacting & curing etc. complete. |
| 30 | Item No.12:- Providing & fixing C I Road box including loading unloading and carting to site of work including all necessary excavation in all types of strata and fixing in muram packing etc complete (225 mmx 300 mm (40kg) |
| 31 | Item No.13- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 32 | ESTIMATE NO. 2-DISTRIBUTION SYSTEM |
| 33 | A) Material section |
| 34 | Item No.1 -Providing & supplying in standard lengths polyethelene Pipes, conforming to IS 4984 with necessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint, including all local & central taxes, transportation and freight charges inspection charges, loading/unloading charges, conveyance to the departmental stores/ site & stacking the same in closed shade duely protecting from sunrays & rains, etc. |
| 35 | 63 mm dia HDPE Pipe 6kg/cm2 |
| 36 | Item No.2-Providng and supplying Idouble flangeSluice valvesconfirming for IS 2906/14846 including worn gear arrangement as per test pressurestainless steel spindle, caps including all taxes transportation etc.complete. |
| 37 | 50mmdia sluice valve PN-1 |
| 38 | B) Labour Section |
| 39 | Item No 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 40 | Item No 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 41 | Item no.3:-Excavation for foundation / pipe trenches in hard rock by controlled blasting including trimming and levelling the bed by chiselling where necessary & removing the excavated material & stacking it in measu-rable heaps,within a distance of 50 m. |
| 42 | Item No.4- Lowering laying & jointing H.D.P.E. Pipe by heating to the ends of pipe with the help of tefflon coated electrimirror/heater to the required temparature & then pressing the end together against each other to form a monolithic & leak proof joint by thermosetting process. the pressing may be required to be done with Jack/Hydraulicjack/Vutt fusion machine etc. complete. with all maerial,labours as directed by Engineer in charge including given satisfacory hydraulic test. |
| 43 | 63mm dia HDPE pipe 6 kg/cm2 |
| 44 | Item No.5-Hydraulic testing of H.D.P.E. Pipe to specified pressure including cost of all materials and labourand water for testing for specified length incluiding cutting placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to providespecified test pressure gauges and other necessary equipments, labour, operation charges, etc required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to origenal position. |
| 45 | 63 mm dia HDPE Pipe6kg/cm2 |
| 46 | Item No. 8- Lowering, laying and jointing in position following C.I.D./F. sluice valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. |
| 47 | 50 mmdia sluice valve PN-1 |
| 48 | Item No.9 - Giving satisfactory hydraulic testing of following C.I.D/F Reflex Valves, Butterfly valves and Sluice Valves. |
| 49 | 50 mmdia sluice valve PN-1 |
| 50 | Item No.10- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 51 | SUB ESTIMATE NO. 3-DISTRIBUTION SYSTEM |
| 52 | Item No.1 -Providing Bore Well |
| 53 | ESTIMATE NO- 4 PUMPING MACHINERY |
| 54 | Item No.1:- Providing erecting giving testof submersible pump set conforming to IS 8034 and moter coforming to IS 9283 with water proof winding, pump shall be sutaible for verious delivery head and discharge with stainless steel shaft, moter sutaible for working on A.C. supply, with cable guard, thrust carben/ fiber bearing to stand entire hydrolic thrust, The pump set shall be sutaible for direct coupling with sutaible suction stiner pump should have sutaible discharge out let as per manufacture design. Antithrust stream lined non return valve shall be provide with the pump. 3m submersible copper coundctor cable in single/ double run and 2 pairs of sutaible size clamp 10mm thck shall be provided with each pmp. |
| 55 | Item No.2:-Providing and erecting commissioning & testing of floor mounting type L.T. panel board (skeleton type) box type as per detailed specification ...etc complete. |
| 56 | Item No.3:-Providing double flanged sluice valve confirming for IS2906/14846 including worn geararrangement as per test pressure stanless steel spindal, cap including all taxes transportation etc. coplete. |
| 57 | Sluice valve(50 mm dia)with hand wheel P.N.rating 1.6 |
| 58 | Item No.4:-Providing and supplying ISI mark CI D/F reflux valve (non return valves) of following diaincluding all taxes (local and central), railway fright, octroi, inspection charges,un loding from raiway wagon, loading in to truck, transport up to departmental store/ site, unloding, stacking etc. complate. |
| 59 | b) Refluxvalve (50 mm dia )P.N.rating 1.6 |
| 60 | Item No.5:-lowering laying and jointing in position following C.I.D/FReflux valve,Butterfly valve and Sluice valve including cost of all labour jointing material including nut bolts and giving satisfactory hydraulictesting etc. complete. (rate for all class of valve) |
| 61 | a)50 mm dia. Sluice valve Pn-1.6 |
| 62 | b) Refluxvalve ( 50 mm dia )P.N.rating 1.6 |
| 63 | Item No.6:- Providing erecting jointing testing ofvarious drop pipe 50 mm dia G.I. medium class in 1.5 M/1 M length or any other length as per site conditionwith heavy duty flanges . ... etc complete as per detailed specification. |
| 64 | Item No 7:-Supplying and errecting Flat flexible submersible cablecopper conductor P.V.C.Insulated, and PVC sheathed. 3core 4.0 sq. mm |
| 65 | Item No.8 :-Suppling and errecting XLPE / PVC insulated armoured cable 1100 v grede with ISI mark Fore core, solid / standered alum coundctor with 6 mm thick 25 mm width MS. Spacer with earth wire 6 sq mm complete erected on wall / on polw with 25x3 mm M.S. clamp or in provded trench in an approved manner.4core 10 sqmm....etc comp. |
| 66 | Item No.9 :-Providing installing and testing earthling arrangement to the installation of motor L.T.panel board starter...etc complete.as per detailed specification |
| 67 | SUB ESTIMATE NO. 6- rising main |
| 68 | A) Material section |
| 69 | Item No.1 -Providing & supplying in standard lengths polyethelene Pipes, conforming to IS 4984/14151/12786/ 13488 with necessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint, including all local & central taxes, transportation and freight charges inspection charges, loading/unloading charges, conveyance to the departmental stores/ site & stacking the same in closed shade duely protecting from sunrays & rains, etc. |
| 70 | 75 mm dia HDPE Pipe 10kg/cm2 |
| 71 | Item No.2-Providng and supplying Idouble flangeSluice valvesconfirming for IS 2906/14846 including worn gear arrangement as per test pressurestainless steel spindle, caps including all taxes transportation etc.complete. |
| 72 | 50mmdia sluice valve PN-1 |
| 73 | Item No.3- Providing and supplying Air Valves as per IS- 14845-2000 and MJP\"s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. |
| 74 | 25mmDia Air Valve PN-1 |
| 75 | B) Labour Section |
| 76 | Item No 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 77 | Item No 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 78 | Item no.3:-Excavation for foundation / pipe trenches in hard rock by controlled blasting including trimming and levelling the bed by chiselling where necessary & removing the excavated material & stacking it in measu-rable heaps,within a distance of 50 m. |
| 79 | Item No.3- Lowering laying & jointing H.D.P.E. Pipe by heating to the ends of pipe with the help of tefflon coated electrimirror/heater to the required temparature & then pressing the end together against each other to form a monolithic & leak proof joint by thermosetting process. the pressing may be required to be done with Jack/Hydraulicjack/Vutt fusion machine etc. complete. with all maerial,labours as directed by Engineer in charge including given satisfacory hydraulic test. |
| 80 | 75 mm dia HDPE pipe 10kg/cm2 |
| 81 | Item No.4-Hydraulic testing of H.D.P.E. Pipe to specified pressure including cost of all materials and labourand water for testing for specified length incluiding cutting placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to providespecified test pressure gauges and other necessary equipments, labour, operation charges, etc required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to origenal position. |
| 82 | 75 mm dia HDPE Pipe |
| 83 | Item No. 5- Lowering, laying and jointing in position following C.I.D./F. sluice valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. |
| 84 | 50 mmdia sluice valve PN-1 |
| 85 | Item No.6- Giving satisfactory hydraulic testing of following C.I.D/F Reflex Valves, Butterfly valves and Sluice Valves. |
| 86 | 50 mmdia sluice valve PN-1 |
| 87 | Item No.7-Providing, supplying and fixing Air valves as per IS-10845 amd MJP\"s standard specifications of approved make and quality of following diameters including all taxes(central and local), railway freight, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/site, unloading, stacking etc.complete. |
| 88 | 25 MM Dia Air Valve |
| 89 | Item No.8:-Lowering laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in charge including cost of conveyance from storeto site of work cost of all material and giving satisfactory hydraulic testing etc.complete. (for all class of valve.) |
| 90 | 25 MM Dia Air valve single ball |
| 91 | Item No.9-Providing & fixing in position M.S. .Air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting n M - 150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement etc.complete as directed by Engineer in charge. |
| 92 | Item No.10-Providing and laying in situ cement concrete mortar 1:2:4 of trap metal for foundation and bedding including bailing out water manually formwork compacting & curing etc. complete. |
| 93 | Item No.11:- Providing & fixing C I Road box including loading unloading and carting to site of work including all necessary excavation in all types of strata and fixing in muram packing etc complete (225 mmx 300 mm (40kg) |
| 94 | Item No.12- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 95 | Sub Estimate No.8 Hdpe stoarage tank cap-10000ltr |
| 96 | Item No.1Providing,hoisting & fixing in position high density polyethylene UV stabilised double layered conforming to I.S. 12701 water storage tank with necessary connections testing etc.complete., |
| 97 | Item No 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 98 | Item No.3: Providing and laying in situ cement concrete of trap / granite / quartzite / gneiss metal for R.C.C. work in foundation like raft grillage, strip foundation and footing of RCC columns and steel stanctions including normal dewatering, formwork, compaction finishing and curing ... etc. complete.(excluding M.S. or tor reinforcement) |
| 99 | Item No. 4- Providing Laterite stone masonary in cement motor 1:6 in super structure including racking out joint |
| 100 | Item No5:- Providing ISI mark G.I. pipes of following class and diameters including all local and central taxes, octroi, inspection charges, transportation to stores, etc.complete. |
| 101 | 50 mm dia Medium |
| 102 | Item No6: Lowering, laying and jointing G.I. pipes and specials of following class and diameter including conveyance from stores to site of works all labour giving satisfactory hydraulic test etc. complete either underground or in vertical position as directed by Engineer-in-charge |
| 103 | a) 50mm dia GI PIPE |
| 104 | SUB ESTIMATE NO. 8-DISTRIBUTION SYSTEM |
| 105 | A) Material section |
| 106 | Item No.1 -Providing & supplying in standard lengths polyethelene Pipes, conforming to IS 4984 with necessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint, including all local & central taxes, transportation and freight charges inspection charges, loading/unloading charges, conveyance to the departmental stores/ site & stacking the same in closed shade duely protecting from sunrays & rains, etc. |
| 107 | 63 mm dia HDPE Pipe 6kg/cm2 |
| 108 | Item No.2-Providng and supplying Idouble flangeSluice valvesconfirming for IS 2906/14846 including worn gear arrangement as per test pressurestainless steel spindle, caps including all taxes transportation etc.complete. |
| 109 | 50mmdia sluice valve PN-1 |
| 110 | B) Labour Section |
| 111 | Item No 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 112 | Item No 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 113 | Item no.3:-Excavation for foundation / pipe trenches in hard rock by controlled blasting including trimming and levelling the bed by chiselling where necessary & removing the excavated material & stacking it in measu-rable heaps,within a distance of 50 m. |
| 114 | Item No.4- Lowering laying & jointing H.D.P.E. Pipe by heating to the ends of pipe with the help of tefflon coated electrimirror/heater to the required temparature & then pressing the end together against each other to form a monolithic & leak proof joint by thermosetting process. the pressing may be required to be done with Jack/Hydraulicjack/Vutt fusion machine etc. complete. with all maerial,labours as directed by Engineer in charge including given satisfacory hydraulic test. |
| 115 | 63mm dia HDPE pipe 6 kg/cm2 |
| 116 | Item No.5-Hydraulic testing of H.D.P.E. Pipe to specified pressure including cost of all materials and labourand water for testing for specified length incluiding cutting placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to providespecified test pressure gauges and other necessary equipments, labour, operation charges, etc required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to origenal position. |
| 117 | 63 mm dia HDPE Pipe6kg/cm2 |
| 118 | Item No. 6 Lowering, laying and jointing in position following C.I.D./F. sluice valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. |
| 119 | 50 mmdia sluice valve PN-1 |
| 120 | Item No.7- Giving satisfactory hydraulic testing of following C.I.D/F Reflex Valves, Butterfly valves and Sluice Valves. |
| 121 | 50 mmdia sluice valve PN-1 |
| 122 | Item No.8- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 123 | Sub Work No.9 Trial Run |
| 124 | Item No.1-Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 month for regional scheme, together with training of personne spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in charge. |
| 125 | GST 12% |
AI Tender Summary
Tender Timeline
Sep 16, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender