|
| 1 | Material and Labourfor servicing of Solar street light fitting of2x11/1x11 watt capacity including servicing of module cleaning, battery inspection, checking of distilled water in battery , inspection of electronic circuits all as specified and directed by engineer in charge. |
| 2 | Supply andFixin Repair Solarbattery110 AH 12 Volts ,C10 Rating all as specified and directed by engineer in charge . .Note -Manufacture warranty certificate shall be deposited by contractor before payment . |
| 3 | Supply and Pore battery electrolyte (distilled water with acid) once in every quarter for each battery all as specified and directed by engineer in charge. |
| 4 | Supply and Fixin repair luminaire assembley for 1x11 watt,efficacy 100 lumen/watt ,Total lumens 1100 , LED lamps (New solar light fittings) with complete accessories all as specified and as directed. |
| 5 | Material and Labour or repairs to solar water heater system by checking the leakage / sepage of the system if found rectified through the authorised dealers. Draining out the system by opening the cold water out let and hose to the bottom tank,dry out the system refilling the same after rectifing the leakes ,topping up with anti freeze solution of soft water,check the corrosion sacrificial anode,replace if found defective,clean the collectorof capacity 100 LPD complete all as specified and as directed. |
| 6 | All as per Item ser No 5 here in before but capacity of 200 LPD |
| 7 | All as per Item ser No 5 here in before but capacity of 500 LPD |
| 8 | Supply and layingin repairCPVC pipes 20mm, SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 9 | S&F in repairs CPVC Ball valve suitable for 20mm dia pipe complete all as specified and directed |
| 10 | Supply and Fix in replacement of solar standalone street light having in-built SCC, 12 watts luminaire(one No.), system voltage 12 V, 60 Wp solar panel, Battery 40 Ah low maintenance lead acid tubular type, HDG tubular pole 5 mtr, etc including civil work for fixing the stand post complete all as specified and directedMake : Havells cat No SOLAR AIO 20W or Eqvt |
| 11 | Supply and Fixin repair thoughened Glass 6mm for Solar Water Heater Flat Plate collector, fix and seal as recommended by the manufacturer and all as directed |
| 12 | Supply and fix in replacement LED street light 60 watt,Lumen efficacy 100 lumen/watt,Total Lumens 6000,5700 K Temperaturemade up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07complete all as specified and directed by engineer in charge . |
| 13 | Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 2 coreincluding dismantling of old U/S cable |
| 14 | All as per item no.13 above but 10 Sqmm 4 core |
| 15 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in hard/dense soil for laying of cables all as specified and directed by engineer in charge. |
| 16 | Returning, filling in including spreading leveling, watering and well ramming in layers n. exc 25cms in hard/dense soil. |
| 17 | Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 18 | Supply and spread dry vegetable Riddled soil in trenches for cable Cushioning.Note: for purpose of payment punned thickness only will be measured and paid. |
| 19 | Supply and lay burnt bricks, class \"B\" designation 75 of size 230 mm x 115 mm x 70 mmfor cable protection all as specified and directed by engineer in charge. |
| 20 | Supply and lay HDPE pipe ,6 kgf/cm2, 32 mm diain trenches for road crossing/laid in floors etc. |
| 21 | Supply and fix for Hard PVC junction box (Make :- Sintex) of size 200x150x150 mmweather proof with bus bar for three phase and neutral link including MCB SP 6 Amps -1 No andnecessary cable gland- 2 Nos for 10 sqmm 4 core cable and locking arrangementand fixing with existing PCC / steel tublerelectric pole above the coppingwith suitable MS clamps, nuts & bolts and necessary electric connection etc.and necessary connection with suitable size cable complete all as directed . |
| 22 | Material and Labourfor Aluminium paintingto Steel tubular Street light pole for 5.5 mtr from top towards bottomand next 0.45 mtr Navy Blue and next 1.10 mtr white and 0.45 mtr Synthetic enameld paint yellow & black colour(Tiger cross) on Coping and writing pole No with white paint inside of black circle above the Navy blue painting and aluminium painting to GI bracket / pipe etc. above the copping and all as specified andand as directed. |
| 23 | Material and Labourin Replacement sub main wiring with two single core 1.5 sqmm multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade and one run of 1.5 sqmm multi stranded copper conductor FRLS cable as earth continuity conductor drawn into steel poleincluding accessories fixed on poles with proper bracings complete all as specified and directed.Note:- Two runs of 1.5 sqmm, one run of 1.5 sqmm conductors and one run of PVC conduit shall be measured as one unit. |
| 24 | Material and Labourin Replacement sub main wiring with two single core 1.5 sqmm multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade and one run of 1.5 sqmm multi stranded copper conductor FRLS cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit 20mm dia including accessories fixed on poles with proper bracings complete all as specified and directed.Note:- Two runs of 1.5 sqmm, one run of 1.5 sqmm conductors and one run of PVC conduit shall be measured as one unit |
| 25 | Material and Labourin Replacement sub main wiring with two single core 2.5 sqmm multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade and one run of 2.5 sqmm multi stranded copper conductor FRLS cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit 20mm dia including accessories fixed on poles with proper bracings complete all as specified and directed.Note:- Two runs of 1.5 sqmm, one run of 1.5 sqmm conductors and one run of PVC conduit shall be measured as one unit |
| 26 | Marking ofStreet light pole made of Steel and RCC bywriting letter of size not less then 5 CM /figures(i.e. MES and 01 to 150 etc ) on black back ground surface of 150 mm diawith white synthetic enamel paint including removing existing letter/figures complete all as specified and as directed |
| 27 | Marking ofSolar Street light pole made of Steelbywriting letter of size not less then 5 CM /figures(i.e. MES and 01 to 150 etc ) on black back ground surface of 150 mm x 100 mm x 5 mm Steel platewith white synthetic enamel paint including Clamp fixed to existing polecomplete all as specified and as directed. |
| 28 | AttendingElectric Complaints for street lights/Security light/ Tower light/Flood light / Building light/Street Light LT UG Cableany type and capacity for continuous running,all as specified and directed by Engineer in charge. Note :(i) Complaints shall be attended by Electrician with in 48 Hrs . (ii) Any items consumed in the Light Complaints, shall be measured seprately with fixing charges . No attendingcharges shall be paid extrafor Complaints for that complaint.(iii) Electric complaints attending charges is not paid when Any other item(New Electric fitting,Cable,Submain wiringetc)has been consumed already.(iv)If Contractor fails to rectify complaint with in 48 hrs ,Then 100 Rs per Complaints per 24 hrs shall berecoveredin the RAR.(v) Ladder for fixing and repair work of LED Street light is provided by the contractor at no extra cost . |
| 29 | Material and labour Corrugated PVC Pipe 20 mm dia all as specified and directed . |
| 30 | M&L in Repair Plain cement concrete1:3:6 type C1 using 20 mm graded stone aggregate as in Pole plinth foundationincluding necessary formwork, weathering slightly, rounded or chamferd angles and throating etc; including two coats of white wash complete all as specified and directed all as specified and as directed. |
| 31 | Supply and fixin repair Solar Water Heater Evacuated tube of length 1800 mm and dia 58 mm ,made of Super hard three layer borex silica ,fix and seal as recommended by the manufacturer and all as directed and specified by engineer in charge |
| 32 | S & F in replacementdie cast aluminium IP66 LED Flood Light luminaire,120 Watt capacity,efficacy 100 lumen/watt ,Total Lumen 12000 Watt all as specified and directedBy engineer in charge . |
| 33 | S & F in replacementdie cast aluminium IP66 LED BuildingLight luminaire with high power LEDs, 25 Watt of Luminious efficacy 120 Lumen /Watt,Total Lumens 3000,5700 K Temperature , capacity all as specified and directedby engineer in charge. |
| 34 | S & F in replacementdie cast aluminium IP65 LED Flood Light luminaire with high power LEDs, 30 Watt of Luminious efficacy 100 Lumen /Watt,Total System Lumens 3000,6500 K, capacity all as specified and directedby engineer in charge. |
| 35 | S&F in replacement Post top lantern LED TYPE 35 Watt,Outdoor type ,5700 K Temperature,Lumen efficacy 80 Lumens/watt,total Lumens 2800 ,IP 65 Protection ,with decorative post top with 360 degree indirect light all as specified and directed by engineer in charge.Make- Wipro cat Part No LP07-431-XXX-57-CL/Havells Cat part No RUBYPT35WLED757PSYMTOPC/Bajaj Cat part No BGCT W4 LED WW |
| 36 | Material and labour in Repair forPCC of LED Bollard fitting by taking down Bollard fitting anddemolishing existing PCC and Make New RCCpedestal of Size 400 mm x 200 mm x 200 mm including GI Sheet 2 Module Box ,Sunmica sheetand refixing the same Bollard fitting by Anchor fastener all as specified and directed |
| 37 | S&F StreetlightContactor ,Maximum optimum current 20 Amps ,AC1 type ,integrated auxiliary contact 1 NO,Control voltage 230 V for 4 pole all as specified and directed by engineer in charge. |
| 38 | Supply and fix Street light Timer ,Digital type ,all as specified and directed by enginneer in charge . |
| 39 | Supply and fix Straight hot shrink cable joint kit for LT ug cable of size 16/10 sqmm 4 core including excavation,refilling of earth workat undergruond cable fault position and making good surface at the fault positioncomplete all as specified and as directed.Note-Cable fault Position shall be detected by the contractor by Manual exacavation upto 30 Mtrs Length. |
| 40 | Supply and fix Straight hot shrink cable joint kit for LT ug cable of size 10 sqmm 2 core including excavation,refilling of earth workat undergruond cable fault position and making good surface at the fault positioncomplete all as specified and as directed.Note-Cable fault Position shall be detected by the contractor by Manual exacavation upto 30 Mtrs Length . |
| 41 | S & F GI pipe bracket 40 mm medium grade dia not exceeding 1.2 mtrs long bend to shape suitable for fixing street light to PCC/steel pole including suitable size MS clamps, bolts, nuts, washers, etc |
| 42 | M&L Painting work of Cross arms structure of Solar hot water system 100 LPD and PVC Tank200 LPD Capacity with two coats of black paint over one coat of red oxide primer all as specified and directed by engineer in charge. |
| 43 | M&L Painting work of Cross arms structure of Solar hot water system 200 LPD Capacity and its PVC Tank 500 LPD Capacity with two coats of black paint over one coat of red oxide primer all as specified and directed by engineer in charge. |
| 44 | Material and labour PVC insulated,PVC round sheathed multicore industrial cable of size 3 Core ,2.5 Sqmmfor volatge grade upto 1100 V,as per IS 694 all as specified and directed by engineer in charge. |
| 45 | Supply & Fix in repair Solar hot water Tank 100 LPD capacity,made of Low carbon steel with porcelain coating ,Outer tank made of Mild steel ,Insulated with PUF 55 mm all as specified and directed by engineer in charge . |
| 46 | Supply & Fix in repair Solar hot water Tank 200 LPD capacity,made of Low carbon steel with porcelain coating ,Outer tank made of Mild steel ,Insulated with PUF 55 MM all as specified and directed by engineer in charge . |
| 47 | Supply and fix Non Return valve ,15 mm dia ,Made of Brass all as specified and directed by engineer in charge. |
| 48 | Supply and fix Non Return valve ,20 mm dia ,Made of Brass all as specified and directed by engineer in charge. |
| 49 | S & F in repair heating element 2 KW of any type suitable for Solar Hot water system as per directed and specified by engineer in charge. |
| 50 | S & F in repair heating element 1.5KW of any type suitable for solar hot water system as per specified and direcetd by engineer in charge. |
