Military Engineer Services-MES has published Comprehensive Repair To Flooring Sanitary Fittings Plumbing Leakage Seepage And Allied Works In Otm Accn In Zone I At Mil Stn Samba Comprehensive Repair To Flooring Sanitary Fittings Plumbing Leakage Seepage And Allied Works In Otm Accn In Zone I At Mil . Submission Date for this Tender is 15-10-2022. Plumbing and Sanitary Work Tenders in samba Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-10-2022 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick/concrete surfaces or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed . NOTE- Work will be carried out upto 2nd storey of bldgs also as per direction of Engr-in-charge including necessaryscaffolding required as per site conditions & no extra payment shall be made on this account. |
| 2 | Rendering 10+5 mm thick on fair faces of brick or concrete surface walls in two layers, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge. |
| 3 | Rendering 10 mm thick cement plaster in cement mortar 1:6 on on brick /stone/concrete surfaces finished even and smooth without using extra cement (upto 2nd storey with necessary scaffolding), complete all as specified and directed. |
| 4 | Rendering 5 mm thickon concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement , complete all as specified and directed . |
| 5 | Demolition of cement concrete (unreinforced) of any description ground to 2nd floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed. |
| 6 | Cleaning of dust removal to all loose existing sunken floor any material manually and with heat tark gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with highly elastic bituminous cold applied putty of tarplasic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or equivalent make as approved by GE cold applied.Bituminous mortar and cold emulsion cum water proofing liquid of Shalikote-T-10 or equivalent make as approved by GE, createdSSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make as approved by GE mixed with portable water in the ratio of 1:1 and apply @ 400gm per Sqm (as per surface condition). Apply first coat of Tarfelt LM or equivalent make as approved by GE having alongwith 200% conforming to ASTM-C-412 & having crack bridging of 8mm conforming to ASTM-C-836 with tensile strength after 7 days0.50mm conforming to ASTM-C-412 with no diluation water on primed surface while the surface is still tacky with consumption of 700gm /Sqm.Lay Geotex of 45 GSM/fiber mesh simultaneously and paste it properly with overlap of 50mm. |
| 7 | Discription count down as per srl item no 6.00 Allowed of first coat to dry for 10 to 12 hrs. Apply 2nd coat on cured first coat with consumption @ 700gm/Sqm in opposite direction of 1st coat by brush or roller.Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm/Sqm. Ensure final curing time of 36 hrs before allowing/carrying out any further work. Conduct ponding test after minimum 7 days applying 2 coats of U V Resistand Elastomeric Exterior Axcrylic weather resistant water proof coating of Shalicryl - 215 or eauivalent make as approved by GE having elongation of 300% after curing of 14 days conforming to ASTM D-6083, for U V protection of bituminous Elastomeric Acrylic emulsified liquid membrance of Tarfelt LM or equivalent make as approved by GE to give long life and prevent its deterioration from sunlight. Note :Application of water proofing treatment will be done by authorised applicator only. |
| 8 | Plain Cement concrete 1:7:12type F-2 (using 40 mm graded stone aggregate) as in sunken filling and mass concrete, complete all as specified and directed |
| 9 | Supply only of liquid water proofing compound ISI marked complete all as specified and directed |
| 10 | Demolition of reinforced cement concrete of any description ground to 2nd floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed. |
| 11 | RCC M-15 (Nominal mix) 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roof slab, landing, balconies, canopies, deck slabs,shelves and the like etc complete all as specified and directed. |
| 12 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 13 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjjas, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified and directed. |
| 14 | Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed . |
| 15 | Brick work withsub class"B" burnt bricks straight or curved on planexc. 6 m mean radius built in CM 1:6 complete all as specified and directed . |
| 16 | Rotational moulded polye- thylene water storage tanksof capacity 500 ltrs (cylindrical vertical with closed top) three layeres hoisted and fixed in position including all necessary connections all as specified in SSR Part I& including dismantling old unserviceable tank, complete all as specified and as directed. |
| 17 | Rotational moulded polye- thylene water storage tanksof capacity 1000 ltrs (cylindrical vertical with closed top) three layeres hoisted and fixed in position including all necessary connections all as specified in SSR Part I& including dismantling old unserviceable tank, complete all as specified and as directed. |
| 18 | Taking down GI pipe 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed |
| 19 | G.I. pipe 15 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed |
| 20 | G.I. pipe 15 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors , but except pipe, complete all as specified and directed |
| 21 | Taking down GI pipe 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed |
| 22 | G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed |
| 23 | G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors , but except pipe, complete all as specified and directed |
| 24 | Taking down shutter of any description not exc. 1.0 sqmeach and removing to store.complete all as specified and as directed. |
| 25 | Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqmeach and removing to store.complete all as specified and as directed. |
| 26 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely) |
| 27 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but not exceeding 4 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely) |
| 28 | Pressed steel frames 105mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed . |
| 29 | Pressed steel frames 125mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed . |
| 30 | 2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified anddirected . |
| 31 | 2nd class hard wood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified anddirected . |
| 32 | Factory made solid PVC door frame of size 50x47mm made out of 5mm thick prelam PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, etc complete all as specified and directed. |
| 33 | Factory made Solid panel PVC Door Shutter, 30mm thick (style),consisting of frame made of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beadding and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 34 | Box type steel windows comprised of tubular frame and shutters made out of outer frame ERW tube "P" section (60x45x25)mm and shutters of ERW tube "P" section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of "Z" section as specified completewith sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel windows will be double shutter external glazed and internal wire glazed complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs. |
| 35 | Box type steel ventilators comprised of tubular frame and shutters made out of outer frame ERW tube "P" section (60x45x25)mm and shutters of ERW tube "P" section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of "Z" section as specified completewith sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel ventilators will be double shutter external glazed and internal wire glazed complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs. |
| 36 | Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as specified and directed. |
| 37 | 3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site including hacking out old glass, fixed in repair, complete all as specified (uptofourth storey with necessary scaffolding) |
| 38 | 3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (uptofourth storey with necessary scaffolding) |
| 39 | 4 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron /Steel /Wood /Aluminium as required at site complete all as specified (uptofourth storey with necessary scaffolding), all as specified. |
| 40 | Galvanised mildsteelwire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specifiedfixed with stainless steel wire staples.complete all asspecified and as directed . |
| 41 | Galvanised mildsteelwire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specifiedfixed with stainless steel wire staples. fixed in repair, complete all asspecified and as directed . |
| 42 | Aluminium anodised, barrel tower boltssize 150 mm of extruded section and fixed complete all as specified and as directed |
| 43 | Butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and as directed |
| 44 | Aluminium handles, fabricated type, anodised Size-150mm, anodised section and fixed complete all as specified. |
| 45 | Aluminium handles, fabricated type, anodised Size-150mm, anodised section and fixed in repair, complete all as specified. |
| 46 | Aluminium alloy, anodised, sliding door bolt Size- 250 mmwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 47 | Aluminium alloy, anodised, sliding door bolt Size- 250 mmwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair, complete all as specified. |
| 48 | Aluminium anodised, barrel tower boltssize 150 mm of extruded section and fixed in repair, complete all as specified and as directed |
| 49 | 150mm, MS ordinary door springplate type incl roller and roller plate complete all as specified and directed . |
| 50 | 150mm, MS ordinary door springplate type incl roller and roller plate, fixed in repair, complete all as specified and directed . |
| 51 | Continuous (piano) hinges,Width of flaps (when open) 30 mmheavy duty mild steel, bright finish or electrogalvanised , complete all as specified. ( ISI Marked) |
| 52 | Aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed. |
| 53 | 19 mm dia decorative aluminium anodised alloy curtain rod fixed with two brackets in each window length, complete all as specified and directed. |
| 54 | Magic eye lenses on entrance door, complete all as specified and directed. |
| 55 | Vitreous china ,Squatting pan "Orissa" pattern size 580x440mm white with integral foot restincluding all joints and making good to the floor etc fixed in repair ,complete all as specified and directed. |
| 56 | Vitreous china wash down water closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover, fixed in repairs complete all as specified and directed. |
| 57 | Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass.complete all as specified and as directed. |
| 58 | PVC valveless, 10 ltrs, syphonic action type, dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, & flush pipe of polythylene of low or high density or PVC 32 mm dia, fixing chain and pull, or lever, if any fixed in repair, complete all as specified and directed |
| 59 | 15mm bore CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 60 | 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, fixed in repair,complete all as specified and directed. |
| 61 | 15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair, complete all as specified and directed. |
| 62 | Bevelled edge mirror of size (600x450mm), selected quality glass approved size , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with SS screws and cup washers, fixed in repair, complete all as specified and directed. (Make : Prayag, Jainko) . |
| 63 | Brasschromiumplatedshower rosewith or without swivel joints, 125mm size, including fixing to steel pipe or union, fixed in repair, complete all as specified and directed. |
| 64 | Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair,complete all as specified and directed. |
| 65 | PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.complete all as specified and directed. |
| 66 | CP brass grating with hole size 100 mmdiaincluding embeding in tiles with white cement. complete all as specified and directed. Make:- Jainko, Essco, Parko. |
| 67 | Vitreous china urinal, half stall type, white (excluding flushing cisteren, flush pipe and waste pipe) including spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms), complete all as specified and directed. |
| 68 | 75 mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed. |
| 69 | Taking down eaves gutters and PVC rainwater / drain pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed . |
| 70 | PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 71 | PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 72 | PVC (SWR) 110mm bore bends any radius with access door, complete all as specified and directed . |
| 73 | PVC (SWR) 75mm bore vent cowl complete all as specified and directed |
| 74 | Demolition of plain cement concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and as directed. |
| 75 | Dismanting of floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed. |
| 76 | Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed |
| 77 | Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , polishedin skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering on brick or concrete surface of wall10 mm thick in CM 1:4, complete all as specified and directed |
| 78 | Non-skid Coloured ceramic tiles (1st quality) 7 to 8 mm thick (square / rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:6, complete all as specified and directed |
| 79 | Non-skid Coloured ceramic tiles (1st quality) 7 to 8 mm thick (square / rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:6, complete all as specified and directed |
| 80 | Non-skid Coloured ceramic tiles (1st quality) 7 to 8 mm thick (square / rectangular joint free) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:6, complete all as specified and directed |
| 81 | Glazed coloured ceramic tiles (1st quality)joint freein vertical surfaces of wall of size 450x250x7mm/ 350x250x7 mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 10 mm thick rendering in CM 1:3on brick /concrete surfaces complete all as specified and directed . |
| 82 | 25 mm thick cement concrete 1:2:4, Type B-1 (20 mm graded stone aggregate)as in sub-base of floor for tiles/Kota stone finished even & rough, complete all as specified and directed |
| 83 | Kota stone floor 18 to 22 mm thick, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6, complete all as specified and directed. |
| 84 | Kota stone floor 18 to 22 mm thick, in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in CM 1:4, complete all as specified and directed. |
| 85 | 20mm thick Granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick CM 1:4 as directed by Engr-in-charge. |
| 86 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 87 | Preparationof newplastered/ concrete surfaces of walls andapplying two coats of cement based paint over and includingone coat of primer, complete all asspecified and directed by Engr-in-charge. |
| 88 | Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc and applyingtwo coats of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding complete all as specified and directed. |
| 89 | Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper overa coat of wall care putty, complete all as specified. |
| 90 | Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, ceilings,Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applyingtwo coats of oil bound distemper over a coat of wall care putty, complete all as specified and directed. |
| 91 | Preparation of new wooden surfaces and applying Two coats of synthetic enamal paint on wood/wood based surfaces over a coat of pink primer exc. 10cm width or girth. complete all as specified and directed . |
| 92 | Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying two coat of synthetic enamel paint on wood surfaces of any description , complete all as specified and directed |
| 93 | Preparation of new steel surfaces and applying Two coats of synthetic enamal paint on steel/steel based surfaces over a coat of pink primer exc. 10cm width or girth. complete all as specified and directed . |
| 94 | Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying two coat of synthetic enamel paint on steel surfaces of any description , complete all as specified and directed |
| 95 | Preparation of new plastered or unplastered surfaces of walls and applying three coats of white washingcomplete all as specified and as directed . |
| 96 | Preparation of old plastered surfaces of ceiling including brooming down or steel wire brushing, screpping down smoke root etc and applying one coat white wash on old decorated surfaces complete all as specified and directed. |
| 97 | Preparation of new plastered surfaces of ceiling and applying three coats of white wash , complete all as specified and as directed. |
| 98 | Preparation of old plastered surfaces of ceiling including brooming down or steel wire brushing, screpping down smoke root etc and applying one coat white wash on old decorated surfaces complete all as specified and directed. |
| 99 | Aluminium (anodised) doubleleaf powder coated window fabricated from standard aluminium box sections all as specified and directed (Make : Hindalco / Indal / Ajit India) and comprising of the following :- a) Chowkhat / frame 100 x 44 x 1.5 mm thick b) Top & bottom rail and styles100x44x1.5 mm thick. c) Aluminium stay 250 mm long with peg for each shutter. d) Stain less steel / aluminium anodised 75 mm butt hinges - 02 Nos each shutter e) Panel of 4.8 to 5.0 mm thick heat observing glass pane (Make-Saint Goblin/ Modi float glass/ Hindustan Pilkington glass works) fixed with standard aluminium beading and rubber gaskets. f) Aluminium anodised handle of 100mm size standard quality (ISI Marked) -1 No each shutter g) Aluminium anodised tower bolt 100 mm long ISI marked - 2 Nos each shutter Note : All fittings are powder coated. |
| 100 | 18/19 mm thick Block board, grade 1 quality, exterior grade, commercial type, with wooden beading all around the shutter fixed in repairs with screws to timber frame work. complete all as specified and directed . |
| 101 | 18/19 mm thick pre-laminated particle board,exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination as in cupboards shelves / drawers shelves with wooden beading all around the shutter or drawers. complete all as specified and directed . |
| 102 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
