|
| 1 | AG-4 cutting wheel, make-Bosch |
| 2 | M- Seal, make- Pidilite |
| 3 | Emery Roll- Rough, make- Conborumdum |
| 4 | Emery Roll fine, make- Conborumdum |
| 5 | Blue paste, Make- Camel |
| 6 | Graphite powder – 500g packing make- Blue bid |
| 7 | M. S. nut bolt 7/8”x 3”(full threaded), make- Good quality |
| 8 | Oil seal (32x45x7)mm, make- Mykoda |
| 9 | Oil seal (40x60x10)mm, make- Mykoda |
| 10 | Oil seal (42x62x7)mm, make- Mykoda |
| 11 | Oil seal (50x67x10)mm, make- Mykoda |
| 12 | Oil seal (35x45x7)mm, make- Mykoda |
| 13 | Oil seal (42x72x10)mm, make- Mykoda |
| 14 | Oil seal (45x60x8)mm, make- Mykoda |
| 15 | Oil seal (110x140x15)mm, make- Mykoda |
| 16 | Oil seal (170x200x15)mm, make- Mykoda |
| 17 | Oil seal (100x120x12)mm, make- Mykoda |
| 18 | ‘V’seal dia- 160mm, make- Mykoda |
| 19 | ‘V’ beltB-55,make- Fenner |
| 20 | ‘V’ beltB-67,make- Fenner |
| 21 | ‘V’ beltB-72,make- Fenner |
| 22 | ‘V’ beltB-80,make- Fenner |
| 23 | ‘V’ beltB-76,make- Fenner |
| 24 | ‘V’ belt C-136,make- Fenner |
| 25 | ‘V’ beltB-63,make- Fenner |
| 26 | ‘V’ belt C-124,make- Fenner |
| 27 | S. S. short bend size- 34, thk- 5mm, make- good quality |
| 28 | Half thread (Here head) stainless steel bolt with nut size- M16x100, make- good quality |
| 29 | AG-4 flap disc, make-Bosch/ Carbonrundum |
| 30 | Scrapper bolt for vacuum filter (As per sample) 8ply width -4 Inch, make- Good quality |
| 31 | Worm wheel for gear boc material brass, ID- 45mm, OD- 150mm, no. of teeth- 30 |
| 32 | M. S bolt and nut 6mm x50mm, good quality |
| 33 | Counter head bolt & nut 3/8”x 2 ½’ |
| 34 | Machine screw ¼”x 1 ¼” |
| 35 | Teflon roller (As per sample) |
| 36 | Ring spanner 36mm, make- Taparia |
| 37 | Ring spanner 46mm, make- Taparia |
| 38 | Oil seal 40x55x7, Mykoda |
| 39 | Oil seal 38x55x8, Mykoda |
| 40 | Oil seal 40x53x7, Mykoda |
| 41 | Oil seal 42x72x8, Mykoda |
| 42 | Oil seal 45x60x8, Mykoda |
| 43 | Oil seal 62x95x13, Mykoda |
| 44 | Oil seal 160x100x13, Mykoda |
| 45 | Shaft for non- drive end of Inter- Rake Carrier-As per drg. |
| 46 | Sprocket for drive End of Inter Rake Carrier- As per sample |
| 47 | Coupling tyre Flex- 6, Fenner |
| 48 | Coupling tyre Flex- 8, Fenner |
| 49 | Coupling tyre TC/P/014/2514-PX, Fenner |
| 50 | Coupling tyre TC/S/011/2004-GN, Fenner |
| 51 | Coupling tyre HPC-85, Hi- Tech |
| 52 | Chain for sugar bag conveyor pitch- 35mm, Make- Diamond |
| 53 | M. S. Idler length- 31 x ½”OD- 2x1/2”, make- Good quality |
| 54 | Stainless steel square washer size -75x75x6, center hole size- 16mm, Good quality |
| 55 | 150 NB seamless equal tee material-SA-234, WP- 11 for -100kg/cm2 & 320°C temp. application, make- I.S.L/M.S.L/T.I |
