|
| 1 | Providing and Fixing of FDP Board for panelling the internal wall portion of Toilet and Changing Room including labour charge and all fittings which is left exposed to give an even shade. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 5 | Anti skid bathroom floor Tiles 400x400 mm |
| 6 | Anti skid bathroom floor Tiles 300x300 mm |
| 7 | Chequered Tiles Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 8 | Light shade pigment using white cement |
| 9 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 10 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 12 | W.C. pan with ISI marked white solid plastic seat and lid |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Internal Work |
| 14 | 15 mm nominal outer dia Pipes |
| 15 | 20 mm nominal outer dia Pipes |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External Work |
| 17 | 15 mm nominal outer dia Pipes |
| 18 | 20 mm nominal outer dia Pipes |
| 19 | Providing and fixing cpvc bip cockof approved quality |
| 20 | a)15 mm nominal bore |
| 21 | Providing and fixingCPVC stop cock (concealed) of standard design and of approved and make conforming to IS:8931 |
| 22 | a) 15 mm nominal bore |
| 23 | Providing and fixingshower raise of approved quality |
| 24 | a) 15 mm nominal bore |
| 25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 26 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 28 | Applying priming coat: |
| 29 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 30 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade . |
| 31 | New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution . |
| 32 | Providing internal & external electrical installations, only the cost of workmanship required for the work as per the direction of Engineer In- Charge. (Approx. 6 to 8 points) |
