Military Engineer Services-MES has published Day To Day Maintenance Work Of B/R Nature, Repair To Rolling Shutters, Steel Gates In Techanical Area At Air Force Station Pathankot. Submission Date for this Tender is 13-10-2022. Door Tenders in pathankot Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Sep-2022 | Corrigendum letter | BOQ | 06-10-2022 |
| 2 | 06-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-10-2022 |
| Sl. No. | Item Description |
| 1 | Supply and fixing in repairs 32 mm dia of flush pipe for low level flushing cisterncomplete all as specified and directedby Engineer-in-Charge. |
| 2 | Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as specified and directedby Engineer-in-Charge. |
| 3 | Supply and fixing in repairs 40 mm dia bore PVC flexible pipe for sink complete all as specified and directedby Engineer-in-Charge. |
| 4 | Supply and fixing in repairs plastic sheet cover closed pattern with flat bottom and cover including chromium plated hinge device complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply and fixing in repairs Jet Spray, cast copper alloy chromium plated body with PVC braided pipe of standard length for EWC complete all as specified and directedby Engineer-in-Charge. |
| 6 | Taking up or down GI tubing 15mm bore including cleaning for refixing complete all as specified and directedby Engineer-in-Charge. |
| 7 | Taking up or down GI tubing 20mm bore including cleaning for refixing complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply and fixing 15 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified and directedby Engineer-in-Charge. |
| 9 | Refixing old steel tubing 15 mm dia and connection in new or old position complete all as specified and directed by Engr in charge. |
| 10 | Supply and fixing 20 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 20 mm) complete all as specified and directedby Engineer-in-Charge. |
| 11 | Refixing old steel tubing 20 mm dia and connection in new or old position complete all as specified and directedby Engineer-in-Charge. |
| 12 | Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and directedby Engineer-in-Charge. |
| 13 | Supply and fixing in repairs brass plunger/spindles for 15mm bore brass bib cocks/stop cocks complete all as specified and directed by Engineer-in-charge |
| 14 | Supply and fixing in repair bib taps brass 15mm bore weight not less than 380 grams & screwed to iron pipe complete all as specified and directedby Engineer-in-Charge. |
| 15 | Supply and fixing Bib tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore complete all as specified and directedby Engineer-in-Charge. |
| 16 | Supply and fixing in repairs 15mm dia Bib Taps, CP fancy type with crutch or butter fly handle screwed down pipe or for screwed iron pipe complete all as specified and directedby Engineer-in-Charge. |
| 17 | Supply and fixingin repairs 15mm dia CP stop cock concealed type cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directedby Engineer-in-Charge. |
| 18 | Supply and fixingin repairs 15mm dia CP anglecockcast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directedby Engineer-in-Charge. |
| 19 | Supply and fixing in repairs pillar taps, 15mm bore cast copper alloy with capstern head, chromium plated screwed down high pressure with or without lettered hot or cold complete all as specified and directedby Engineer-in-Charge. |
| 20 | Supply and fixing in repairs 600mm x 450mm x 5.5mm beveled edge mirror of selected quality glass, mounted on 6mm AC building board or commercial plywood and fixed of wooden plugs with CP brass screws complete all as specified and directedby Engineer-in-Charge. |
| 21 | Supply and fixing in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directedby Engineer-in-Charge. |
| 22 | Supply and fixing in repairsbrass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directedby Engineer-in-Charge. |
| 23 | Supply and fixing in repairs vitreous china squatting pan "Orissa pattern size 580x440mm white with"P" or "S" trap and integral foot rest (excluding, flushing cistern and flush pipe) squatting pan including connection"P" trap and to flushing pipe, anti syphonage pipe and trap set in and including concrete and making good the flooring as per existing specification and taking out existing WC complete all as specified and directedby Engineer-in-Charge. |
| 24 | Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white, with "P" or "S" trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe complete incl making good to floor to match with adjoining surface and taking out existing WC complete all as specified and directedby Engineer-in-Charge. |
| 25 | Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 10 liters capacity with intel, ball valve, float valve push button type handle including telescopic flush pipe 32 mm dia complete all as specified and directedby Engineer-in-Charge. |
| 26 | Supply and fixingvitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets including 32mm bore PVC waste pipe and CP waste couplingcomplete and fixed in repair complete all as specified and directedby Engineer-in-Charge. |
| 27 | Supply and fixing in repairs viterous China urinal, bowl type back or corner wall type of size 465x355x265 complete with waste fittings including providing and fixing complete all as specified and directedby Engineer-in-Charge. |
| 28 | Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe including disconnecting existing tanks and refixing in position after cleaning for 500/1000/2000 litres capacity of tank including writing of date of cleaning with stencil pattern complete all as specified and directedby Engineer-in-Charge. |
| 29 | Supply and fixing in repairs 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) white colour three layers hoisted andfixed in position including GI tank nipple etc.including dismantling existing water tank and removing from site of any capacity complete all as specified and directedby Engineer-in-Charge. |
| 30 | Supply and fixing in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) white colourthree layers hoisted andfixed in position including GI tank nipple etc, including dismantling existing water tank and removing from site of any capacity complete all as specified and directedby Engineer-in-Charge . |
| 31 | Supply and fixing in repairs PVC lid for poly water storage tanks of capacity 500/1000/2000 Liters including PVC hinges and PVC locking both complete all as specified and directedby Engineer-in-Charge. |
| 32 | Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directedby Engineer-in-Charge. |
| 33 | Supply and fixing in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directedby Engineer-in-Charge. |
| 34 | Material and labour for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directedby Engineer-in-Charge. |
| 35 | Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directedby Engineer-in-Charge. |
| 36 | Supply and fixing Mild steel work as in Joist, chahhel for sliding gates,angle iron of tee section of Gde Fe 410-W indepnendently without connecting plates etc, (cut to ordinary length) complete all as specified and directedby Engineer-in-Charge. |
| 37 | Supply and fixing in replacement framed work as in doors or gates and sign boards of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality B complete all as specified and directedby Engineer-in-Charge. |
| 38 | Supply and fixing MS plate 6 to 8mm thick plain, cut to shapeforming holes and welded to truss and verticle post all as required, complete confirming to Fe 410-W(Gde- 250)quality-B complete all as specified and directedby Engineer-in-Charge. |
| 39 | Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long and dia of neck is 5 to 10mm complete all as specified and directedby Engineer-in-Charge. |
| 40 | Supply and fixing mild steel bolts purpose made with hexagonal or square head at one end and screwed the other end or screwed end to be fitted with washers and one hexagonal or square but dia of shank exceeding 20mm and not exceeding 25mm, length of bolt exceeding 30cm long, complete all as specified and directedby Engineer-in-Charge. |
| 41 | Material and labour for Cemnet concrete type B-2, 1:2:4 (40 mm graded crushed stone aggregate) as in post holes complete all as specified and directedby Engineer-in-Charge. |
| 42 | Preparing new steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directedby Engineer-in-Charge. |
| 43 | Preparation to GI steel surfaces of any description over 10 cm width or girth and applytwo coats of synthetic enamel paint matt finish camouflage pattern over one coat of EICH primer complete all as specified and directedby Engineer-in-Charge. |
| 44 | Taking down anti bird netting of any description at any position and any height complete all as specified and directedby Engineer-in-Charge. |
| 45 | Supply & Fixing of bird control nets of polyolefin all weather proof co-polymer, machine knotting using CNC machine with DSLS technology for anti slip knotting, mesh size 20mmx20mm and diameter of twine 01mm with 2mm dia border rope including 2mm dia tie ropes braided/ standard rope of polyolefin coplymers at an interval of 10ft having length of 6ft including fixing at any height / any location all as per manufacturers instructions complete all as specified and directedby Engineer-in-Charge. |
| 46 | Supply and fixing in repairs 100 mm stainless steel but hinges, medium weight quality (ISI Marked), fixed with steel chromium plated bright screws complete all as specified and directedby Engineer-in-Charge. |
| 47 | Supply and fixing 100 mm stainless steel but hinges, medium weight quality (ISI Marked), fixed with steel chromium plated bright screws complete all as specified and directedby Engineer-in-Charge. |
| 48 | Supply and fixing 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directedby Engineer-in-Charge. |
| 49 | Supply and fixing in repair 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directedby Engineer-in-Charge. |
| 50 | Supply and fixing 300mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified and directedby Engineer-in-Charge. |
| 51 | Supply and fixing in repairs 300mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified and directedby Engineer-in-Charge. |
| 52 | Supply and fixing in repairs aluminium anodised barrel tower bolt of extruded section of size 200 mm complete all as specified and directedby Engineer-in-Charge. |
| 53 | Supply and fixingaluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directedby Engineer-in-Charge. |
| 54 | Supply and fixing in repairs aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directedby Engineer-in-Charge. |
| 55 | Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directedby Engineer-in-Charge. |
| 56 | Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directedby Engineer-in-Charge. |
| 57 | Supply and fixing in repairs Door closer hydraulically regulated, aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kgandfixed complete all as specified and directedby Engineer-in-Charge. |
| 58 | Material and labour in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directedby Engineer-in-Charge. |
| 59 | Supply and fixing in repairs brass Mortice lock, vertical type, 4 levers, size 100 mm suitable for aluminum doors complete all as specified and directedby Engineer-in-Charge. |
| 60 | Repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminiumsnap beading ,re-setting floor/hydraulic spring etc complete all as specified and directedby Engineer-in-Charge. |
| 61 | Supply and fixing in repairs9 to 12 mm thick Pre laminated interior grade both sides laminated at bottom pane of aluminium door inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc;, supplying & fixing at site as per specification complete all as specified and directedby Engineer-in-Charge. |
| 62 | Supply and fixing in repairs5.00mm thick glass fixed with rubber packing aluminiumsnap beading and metal pins in skelton shutters of doors and windows including solar control film 25 micron reflective type stick to glass panes as per manufactures instructions complete all as specified and directedby Engineer-in-Charge. |
| 63 | Supply and fixing for aluminium anodized doorshutter, aluminium section of sizevertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directedby Engineer-in-Charge. |
| 64 | Supply and fixing for aluminium anodized door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directedby Engineer-in-Charge. |
| 65 | Taking down shutters of any description exc 1sq.m and n exc2 sqm eachcomplete all as specified and directedby Engineer-in-Charge. |
| 66 | Taking down chowkhats or frame n exc 1.50 sqm each complete all as specified and directedby Engineer-in-Charge. |
| 67 | Taking down chowkhats or frame exc 1.50 sqmbut n exc 4 sqmeach complete all as specified and directedby Engineer-in-Charge. |
| 68 | Refixing in same opening shutters of any description exc 1sq.m and n exc2 sqm eachcomplete all as specified and directedby Engineer-in-Charge. |
| 69 | Supply and fixing for factory madeSteel window/ Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two open able leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick refer TD Drawing No CEAF/AR-480/2015 Sheet No 2(A)/4 dated 30.12.2015 including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 and match the disturbed portion with existing surface four Nos for each windowincluding following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g)Including two coats of synthetic enamel paint complete. (h) Stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm &fixed with aluminium wire staples. (j) Glass pane 3mm thick fixed with MS pin and oil putty. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 70 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directedby Engineer-in-Charge. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. Area exceeding 1.00 sqm but not exceeding 2.00 sqm each |
| 71 | Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates with and including necessary fixing lugs, stainless steel hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer, including fixing of holdfast complete all as specified and directedby Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc complete all as specified and directedby Engineer-in-Charge. |
| 72 | Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer, includingfixing of holdfast complete all as specified and directedby Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc complete all as specified and directedby Engineer-in-Charge. |
| 73 | Supply and fixing for second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directedby Engineer-in-Charge. |
| 74 | Supply and fixing for 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified, including two coat of synthetic enamal paint over one coat of pink primer,complete all as specified and directedby Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated |
| 75 | Supply and fixing for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides particle board core including two coat of synthetic enamal paint over one coat of pink primercomplete all as specified and directedby Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated |
| 76 | Supply and fixing for 35mm thick 2nd class Hard wood glazed and skelton shutters open rebated and prepared to receive glass gauze(Without sash bar )etc as specified in SSR Pt- I Sec -8 clause 8.20 (a) complete all as specified and directedby Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated |
| 77 | Supply and fixing for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube including taking down with existing one Complete all as specified and directed by Engineer-In- Charge.NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc complete all as specified and directedby Engineer-in-Charge. |
| 78 | Supply and fixingfactory made PVC pre laminated door shutters 28 to 32mm thick with PVC hollow profile core with wood grain PVC sheet 5mm thick on one side, plain PVC 5mm thick sheet on back face, including taking down with existing one complete all as specified and directedby Engineer-in-Charge. |
| 79 | Supply and fixing Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 33-35 mm thick (style) consisting of frame made out of mild steel tubes of size 19mm x 19 mm (19 gauge)for top and bottom rails and 19mm x 19 mm (19 gauge) in styles.Single Pieces plain coloured PVC sheets 5mm thick to be used to cover styles and rails.PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles & plain coloured PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottem rail.Panel will be wire gauges and tighten firmly and fitted as per manufactures instructions including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm and Aluminum XPM in rhombus shape, in one Piece from top railtobottom rail complete all as specified and directedby Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated |
| 80 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directedby Engineer-in-Charge. |
| 81 | Supply and fixing 4.80 mm thick glass sheet, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directedby Engineer-in-Charge. |
| 82 | Supply and fixing Galvanised stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directedby Engineer-in-Charge. |
| 83 | Preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint,over one coat of pink primer complete all as specified and directedby Engineer-in-Charge. |
| 84 | Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to store and rubnbish of the permises complete all as specified and directedby Engineer-in-Charge. |
| 85 | Material and labour for Glazed ceramic coloured tiles, of size 300 mm x 200 mmx7mm thick, as in skirting, dado set and jointed with neat cement slurryincluding pointing in white cement with pigment to match the shade of tiles also including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directedby Engineer-in-Charge. |
| 86 | Non skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.11 Sqm but n.exe 0.18 Sqm, laid in floors set and jointed with neat cement slurryincluding pointing in white cement with pigment to match the shade of tiles also including 15 mm thick screed bed in cement mortar 1:4complete all as specified and directedby Engineer-in-Charge. |
| 87 | Non - skid Ceramic coloured tiles7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchalso including 15 mm thick screed bed in cement mortar 1:4complete all as specified and directedby Engineer-in-Charge. |
| 88 | Material and labour for light shade vitrified tiles flooring 9-10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shedalso including 15 mm thick screed bed in cement mortar 1:4complete all as specified and directedby Engineer-in-Charge. |
| 89 | Demolition of brick work built in cement mortar etc., complete all as specified and directedby Engineer-in-Charge. |
| 90 | Brick work with sub class "B" brick straightor curved onplan built in cement mortar 1:6 complete all as specified and directedby Engineer-in-Charge. |
| 91 | Material and labour for rendering 15mm thick in cement mortar 1:6 on brick surface finished even and smooth without using extra cement complete all as specified and directedby Engineer-in-Charge. |
| 92 | Taking down cement plaster of any description including raking out joints hacking for key scrubbing down with water etc including removing debris out side MD land complete all as specified and directedby Engineer-in-Charge. |
| 93 | Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directedby Engineer-in-Charge. |
| 94 | Preparation of new surface and applying two coats of exterior acrylic paint of any shadein camouflaging pattern as approved by GE over a coat of self primer on newly plasteredsurfaces or wall as per manufacture"s instruction complete all as specified and directedby Engineer-in-Charge. |
| 95 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins etc. under 40 Sqcm in section framed work complete all as specified and directedby Engineer-in-Charge. |
| 96 | Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directedby Engineer-in-Charge. |
| 97 | Dismantling GI/PGI corrugated or semi corrugated sheets in wall cladding or roof coverings including ridges and make good of aluminium earthing strips after fixing of sheets complete all as specified and directedby Engineer-in-Charge. |
| 98 | Supply and fixing for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directedby Engineer-in-Charge. |
| 99 | Supply and fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directedby Engineer-in-Charge. |
| 100 | Taking down earthing strip or arrester and refixing same postion after fixing of any type roof sheet complete all as specified and directedby Engineer-in-Charge. |
| 101 | Taking down rolling shutters, push type or manually operated complete all as specified and directedby Engineer-in-Charge. |
| 102 | Taking down rolling shutters, gear operated complete all as specified and directedby Engineer-in-Charge. |
| 103 | Supply and fixing steel rolling shutters 1.25mm thick push, pull or mannual type without ball bearing as specified including top cover, anchorup rod, hasp and staple and one coat of primer, errected in posn, all as indicated complete all as specified and directedby Engineer-in-Charge. |
| 104 | All as per item No 103 above but gear operated type with beval gear box and crank handle complete all as specified and directedby Engineer-in-Charge. |
| 105 | Material and labour for Oiling greasing to all parts of Steel Rolling Shutters of any size (manually/Gear operate) for smooth function and refixing in the same position complete all as specified and directedby Engineer-in-Charge. |
| 106 | Replacement of worn out gear wheel of standard size including taking down complete all as specified and directedby Engineer-in-Charge. |
| 107 | Replacement of worn out shaft 50mm of rolling shutter including taking out complete all as specified and directedby Engineer-in-Charge. |
| 108 | Replacement of Ball bearing (6312, 6212) of rolling shutter including taking down complete all as specified and directedby Engineer-in-Charge. |
| 109 | Replacement of old tension spring with new tension spring of size 450mm for shutters not exceeding 12 Sqm each complete and all as specified. |
| 110 | Replacement of old tension spring with new tension spring of size600mm for shutter exceeding 12 Sqm each complete all as specified and directedby Engineer-in-Charge. |
| 111 | Replacement of bevel gear box with crank handle to rolling shutters complete all as specified and directedby Engineer-in-Charge. |
| 112 | Replacement of hood covers made out of 0.63mm thick plain steel sheetmade to shape asrequired as the contours of the bracket plate proper fixing with angle/ flat stiffners on the top and bottom edges and fixed to the bracket plate complete all as specified and directedby Engineer-in-Charge. |
| 113 | Supply and fixed in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directedby Engineer-in-Charge. |
| 114 | Material and labour for running welding in repairs n.exc 6mm thickness of metal to be welded complete all as specified and directedby Engineer-in-Charge. |
| 115 | Material and labour for dismatling of steel gates exc 5 Sqm but n.exc 12 Sqm & refixing after necessary repairing including replacement of wheels, bearing etc as reqd (wheels, bearing etc will be measured and paid separately), oiling and greasing complete all as specified and directedby Engineer-in-Charge. |
| 116 | All as per item No 115 above but not exc 5 Sqm each complete all as specified and directedby Engineer-in-Charge. |
| 117 | Supply and fixing of ball bearingsNo. 6311 to 6315 of sliding hanger gates complete all as specified and directedby Engineer-in-Charge. |
| 118 | Supply and fixing of ball bearingsNo. 6304 to 6308 of sliding hanger gates complete all as specified and directedby Engineer-in-Charge. |
| 119 | Repair to MS wheel of 40 to 50mm thick and 18 to 20 cm height including shaft and check nuts complete including hole at centre and grooves for fixing bearings complete all as specified and directedby Engineer-in-Charge. |
| 120 | Repair to MS wheel of 70 to 80mm thick and 28 to 30 cm height including shaft and check nuts complete including hole at centre and grooves for fixing bearings complete all as specified and directedby Engineer-in-Charge. |
| 121 | Repair to for 300mm dia and 80mm wide pulley of required depth complete all as specified and directedby Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
