Military Engineer Services-MES has published Provision Of 2 X Bore Well And Allied Works For Leimakhong Mil Stn. Submission Date for this Tender is 21-10-2022. Bore Well Tenders in leimakhong Manipur. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-10-2022 |
| Sl. No. | Item Description |
| 1 | Material and labour treating the backfill in contact with foundation at the rate of 2.25 litres of ATT chemical emulsion per running metre of the perimeter wall of building complete all as specified and directed. |
| 2 | Material and labour treating the backfill in contact with foundation at the rate of 7.5 litres of ATT chemical emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 3 | Material and labour treating the top surface of filled earth at the rate of 5 litres of ATT chemical emulsion per square metre of surface complete all as specified and directed. |
| 4 | Material and labour treating the soil under plinth protection at the rate of 5 litres of ATT chemicalemulsion per square metre of surface area complete all as specified and directed. |
| 5 | Surface dressing not exceeding 15 cm deep in soft / loose soil complete all as specified and directed. |
| 6 | Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation and getting out in soft/loose soil complete all as specified and directed. |
| 7 | Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 8 | Excavating over areas, exc 1.5mand n.exc 3m deep and getting out in soft/loose soil complete all as specified and directed. |
| 9 | Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations complete all as specified and directed. |
| 10 | Material and labour broken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 11 | Material and labour 75mm thick plain cement concrete type C 2, 1:3:6 (40mm graded stone agg) laid in panels including finished even and smooth using extra cement as in plinth protection including necessary formwork to edges and filling of joints with bitumminous sealing compound complete all as specified and as directed. |
| 12 | Returning, filling in including spreading, levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 13 | Removing excavated soft/loose soil n.exc 50 mtrand depositing where directedat a level n.exc 1.50m above the starting point complete all as specified and directed. |
| 14 | Material and labour for formwork to sides of concrete foundations and plinth beams and similar work vertical or to batter for flat and rough finished surfaces complete all as specified and directed. |
| 15 | Material and labour formwork to side of pillars, posts, struts, piers, columns and stanchions for square, rectangular rough finished surfaces all as specified and directed. |
| 16 | Material and labour formwork to side of faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished surfaces all as specified and directed. |
| 17 | Material and labourformwork to sides and soffits of floor or roof beams and lintels, cantilevers, overhangs etc for flat and rough finished surfaces all as specified and directed. |
| 18 | Material and labourFormwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work: n.exc 200mm thick (Horizontal or sloping) for flat rough finished surfaces all as specified and directed. |
| 19 | Material and labour for reinforced cement concrete (design mix) in M-30 (20mm graded aggregates) for foundation and plinth beams etc complete all as specified and directed.Note:- Reinforcement and form work required shall be measured Note:-(i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 20 | Material and labour for Reinforced cement concrete (design mix) in M-30, (20 mm graded aggregate) in columns/pillars complete all as specified and directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 21 | Material and labourfor reinforced cement concrete (design mix) in M-30 (20mm graded aggregate) forwalls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 22 | Material and labourfor reinforced cement concrete (design mix) in M-30 (20mm graded aggregate) forslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 23 | Material and labour for reinforced cement concrete (design mix) in M-25 (20mm graded aggregates) for foundation and plinth beams etc complete all as specified and directed.Note:- Reinforcement and form work required shall be measured Note:-(i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 24 | Material and labour for Reinforced cement concrete (design mix) in M-25, (20 mm graded aggregate) in columns/pillars complete all as specified and directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 25 | Material and labourfor reinforced cement concrete (design mix) in M-25 (20mm graded aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 26 | Material and labourfor reinforced cement concrete (design mix) in M-25 (20mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 27 | Material and labourfor reinforced cement concrete (design mix) in M-25 (20mm graded aggregate) for chajja complete all as specified and directed. Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 28 | Material and labour for TMT steel bars 10mm dia and over, cut to length,bent to shape required,including cranking bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips qualsecuring with clips all as specified and directed. |
| 29 | -ditto- all as per item No 28 above but 6mm to 8mm dia as in stirrups complete all as specified and directed. |
| 30 | Material and labourfor brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 31 | Material and labourfor brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, all as specified and directed. |
| 32 | Material and labour for 20 mm thick Damp proof course in CM 1:2 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 33 | Material and labour for sand filling under floors or in foundations or as cable protection including watering and consolidation complete all as specified and directed. (Note: Compacted thickness / Punned thickness shall be measured for payment purpose) |
| 34 | Supply and fixing polythene sheet, black colour of 150 micron laid under floor complete all as specified and directed. |
| 35 | Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floorfinished the surface rough complete all as specified and directed. |
| 36 | Material and labour 40mm thick plain cement concrete type B 1, 1:2:4 (20mm graded stone agg) as in flooring including necessary formwork finishing cement concrete surface even and smooth ( Without using extra cement) complete all as specified and as directed. |
| 37 | Material and labour for 20-25 mm thick machine cut kota stone slab shall be laid on floor,laid and jointed with grey cement slurry mixed with pigment to match the colour / shade of the slab over and including 20mm thick screed bed / bedding layerin cement mortar (1:4)with roughening of surface, including rubbing and polishing complete all as specified and as directed. |
| 38 | Material and labour for 20-25 mm thick machine cut kota stone slab on verticle surface as skirting/dado over and including 10mm thick cement plasterin cement mortar (1:4)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed |
| 39 | Material and labour for non skid ceramic coloured tiles7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm shall be laid on floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour / shade / matrix of tiles over and including 15mm thick screed bed / bedding layer in CM (1:4) complete all as specified and as directed. |
| 40 | Material and labour for glazed ceramic coloured tiles of size 350 x 250 mm / 450 x 350 mm, 7 to 8mm thick (Square/ rectangular) on vertical surfacesas in dado / skirtingetc set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour / shade / matrix of tiles shall be laid over and including 10mm thick cement plaster / backing coat in CM (1:4) finished the surface even and fair to receive tile complete all as specified and as directed. |
| 41 | Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | Material and labourfor rendering 5mm thick in CM 1:3 in ceiling on fair faces of brick work or concrete surfaces, finished even and smooth treated with sagol finish to a thickness not less than 1mm all as specified and directed. |
| 43 | Material and labour for rendering 15mm thick in cement mortar1:4on fair faces of brick of concrete surfaces on wall, finished fair and even without using extra cement mixed with 3% WPC on 2nd coat of 5mm plaster complete all as specified and directed. (Note:-WPC shall be measured and paid seperately). |
| 44 | Supply only liquid water proofing compound of best quality completeall as specified and as directed. |
| 45 | Materials and labour for preparation of old decorated plasteredsurfaces of walls and applying two coats of cemet base paintover a coat of alkali resistance primer complete all as specified and as directed. |
| 46 | Materials and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. |
| 47 | Materials and labour for preparation of new plasteredsurfaces of ceiling and applying three coat of white wash complete all as specified and as directed. |
| 48 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 49 | Material and labour for preparation of new wooden surfaces of any description n.exc 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 50 | Material and labour for rendering 15mm thick in cement mortar1:4onroof slab or concrete surfaces, finished fair and even without using extra cement mixed with 3% WPCcomplete all as specified and directed. (Note:-WPC shall be measured and paid seperately). |
| 51 | Material and labour for water proofing treatment to RCC roof surface incl parapet comprising with the following course of treatment/specifications from bottom to top :- (a) Applying cold bituminous primer 85/25 grade @ 0.25 liters per sqm confirming to IS 3384-1986 over plastered surfaces of roof incl parapet surfaces. (b) One layer of APP based polymeric membrane of approved manufacturer,3mm thick, weight not less than 3.00 kgs per sqm, reinforced with non woven polyester fabric (weight not less than 160 gms per sqm). Polymeric membrane shall taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note: (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions. (c) Applying two coats ofaluminum paint on top of APP membrane. |
| 52 | Supply and fix 125x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and as directed. |
| 53 | Supply and fixing for factory made 35mm thick second class hardwoodplain framed panelled shutters (two panels) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm thick veenered particle boardwith commercial veenering on both faces. The size of rail and stiles shall be as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 54 | Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. |
| 55 | Supply and fix anodised aluminium frame for doors, windows, ventilators with one or more rebatesincluding joining cleat for fixing etc. complete all as specified and directed. |
| 56 | Supply and fixing anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified and as directed. |
| 57 | Supply and fixing3 mm thick sheet glass, ordinary quality and glazing with oil putty, glazing pin etc insquare n.exe 0.50 Sqm in each panecomplete all as specified and directed. |
| 58 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube suppling and fixing in opening as per specification & drawing complete all as specified and as directed. |
| 59 | S&F Factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification . |
| 60 | Supply and fixing in repair steel rolling shutters of lath thickness 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed. |
| 61 | Material and labour for mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 62 | Supply and fixing 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 63 | Supply and fixing 100 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. |
| 64 | Supply and fixing 150 mm extruded aluminium alloy handles, cast type anodised complete all as specified and directed. |
| 65 | Supply and fixing 200mm sliding door bolts, aluminium alloy, anodised, with hasp and staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 66 | Supply and fixing Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary" labours; articles n exc 200 cu. cm each complete all as specified and directed. |
| 67 | Supply and fixing150mm lenth aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 68 | Supply and fixing200mm lenth mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 69 | Supply and fixing PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets, PVC flush pipecomplete all accessories complete all as specified and directed . |
| 70 | Supply and fixing vitreous china wash basin white, angleback of size 400x400 mm including32mm dia PVC waste pipeCP brass wast coupling 32 mmdia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washercompleteat site and all as directed. |
| 71 | Supply and fixing 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 72 | Supply and fixing aluminium towel Rail 600 mm long and 20 mm dia fixed with and including CP brass screws and wooden/plastic cleats complete all as specified and directed. |
| 73 | Supply and fixing soap dish chromium plated, steel / stainless steel, approx size 160mm x 160mm x 1mm thick, fixed to wall with plugs and CP brass screws complete all as specified and directed. |
| 74 | Supply and fixing Vitreous china wash down water closet pan (pedastal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 75 | Supplying and laying of 16 mm outer diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 76 | Supplying and laying of 20 mm outer diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 77 | Supply and fix as of 15mm bore Chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe including taking down old unserviceable one complete all as specified and as directed. |
| 78 | Supply and fixing 15mm bore stop valve, fancy type cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixedto GI pipe complete all as specified and as directed. |
| 79 | Supply and fixing as 15mmbore dia bib tapscastcopper alloy chromium plated, fancy type , long neckwith crutch or butterfly handle, screwed down, screwed for iron pipecomplete all as specified and as directed. |
| 80 | Supply and fixing PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 81 | Supply and fixing PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 82 | Supply and fixing 125 mm dia grating doom with waste hole of PTMT (minimum weight 40 gm) complete all as specified and as directed. |
| 83 | Supply and fixing cast iron nahani trap with grating 100mm outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and as directed. |
| 84 | Material and labourfor PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 85 | Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 86 | Supply and fixingfor 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches with and including necessary clamps complete all as specified and directed. |
| 87 | Supply and fixing 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed. |
| 88 | Supply and fixing 110 mm bore PVC (SWR) junction single (Single T) complete all as specified and directed. |
| 89 | Supply and fixing 110 mm bore PVC (SWR) floor trap (ISI marked) outlet with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (Using 20 mm graded stone aggregate) and making good the disturbed surfaces to match with existing complete all as specified and directed. |
| 90 | Supply and fixing 160 mm bore PVC (SWR) rain water pipe in any length with or without ears with cement joint fixed to wall complete all as specified and directed. |
| 91 | Supply and fixing 20 mm boreball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 92 | Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 500 litresincluding providing necessary connections complete all as specified and as directed. |
| 93 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil & removing the debris to out side MD land all as specified and directed. |
| 94 | Material and labour for machine pressed precast colour concrete interlocking paver block made with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and as directed . |
| 95 | Material and labour for machine pressed precast cement concrete tiles 25cm x 25cm x 22mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed . |
| 96 | Material and labour for 25 mm thick PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in floor, finished fair and even complete all as specified and directed. |
| 97 | Material and labour forPCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in kerb or mud stop, rounded or chamfered on edges complete all as specified and directed. |
| 98 | Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundations complete all as specified and directed. |
| 99 | Supply and fixing reinforced concrete pipes, class NP3, bore of pipe 150mm, laid and jointed complete with collars complete all as specified and directed. |
| 100 | Material and labour for plain cement Concrete 1:3:6 type C2 (using 40m graded crushed stone aggregate) as in bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 101 | Material and labourprecast Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) in cover slab set and jointed in cement mortor 1:6 complete all as specified and directed. |
| 102 | Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 103 | Material and labour for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of formwork complete all as specified and as directed. |
| 104 | Supply and fixingfor 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall or ceiling or laid in floors with and including necessary clamps complete all as specified and directed. |
| 105 | Supply and fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 106 | Supply and fixing 100 mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, with cement joints, fixed on wall complete all as specified and directed. |
| 107 | Material and labour for loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and directed. |
| 108 | Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 109 | Material and labourfor brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 110 | Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, kneelers, kerbs, bed blocks, hold fast block, or chamfered angles and throating and the like including necessary use and waste of formwork complete all as specified and as directed. |
| 111 | Material and labour for rendering 20mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed. |
| 112 | Material and labour for TMT steel bars 6 to 8mm dia cut to length,bent to shape required,including cranking bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips qualsecuring with clips all as specified and directed. |
| 113 | Supply only integral water proofing compound of best quality completeall as specified and as directed. |
| 114 | Supply and fixing 150mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd. |
| 115 | Supply and fixing 200mm bore cast iron pipes with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches complete all as specified and as direcetd. |
| 116 | Supply and fixing 150mm bore cast iron pipes with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches complete all as specified and as direcetd. |
| 117 | Material and labour for point wiring (concealed type) for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including 20 mm dia PVC rigid conduitwith all accessoriesand PVC rectangular boxes for mounting switch, socket and fan regulator etc with and including chase cutting complete all as specified and as directed. (Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of cutting chases andmaking good the disturbed surfaces is deemed to be included in the quoted rate. (iii) Cutting chases shall be done with mechanical chase cutter.) |
| 118 | .-Ditto- all as per item No 117.00 here-in-before butfor 5 pin 5 Amps socket outlet on the independant board complete all as specified and directed. |
| 119 | .-Ditto- all as per item No 117.00 here-in-before butfor 5 pin 5 ampssocket outlet on the same board complete all as specified and directed. |
| 120 | All as per item No 117.00 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed by Engr-in-Charge.( circuit to be laid seperatly ) |
| 121 | supply and fixing for modular switch 6 Amps, single pole, 1 way,1 module complete all as specified and directed. |
| 122 | M/L for modular socket outlet2/3 pin 6 Amps combined 2 module complete all as specified and directed. |
| 123 | Supply and fixing modular switch 1way, 16 Amps,1 module complete all as specified and directed. |
| 124 | Supply and fixing modular socket outlet2 in 1, 6/16 Amps combined 2 module 2 module complete all as specified and directed. |
| 125 | Supply and fixing ceiling rose , 3 phase/pvc/polycarbonate, isolated body complete all as specified and directed. |
| 126 | Supply and fixing and concealing modular metal flush box for 3 module complete all as specified and directed. |
| 127 | Supply and fixing and concealing modular metal flush box for 6 module complete all as specified and directed. |
| 128 | Supply & fixing modular white cover plate with frame of 3 module complete all as specified and directed. |
| 129 | Supply & fixing modular white cover plate with frame of 6 module complete all as specified and directed. |
| 130 | Supply and fixing IP >= 20, Class I, LED tube light fitting 20W (4 ft), CRI>=80, CT.= 5700K, wall / surface mounted integrated type with all accessories internally prewired and including connecting of flexible wire twin / three core from ceiling rose to fitting in flexible conduit complete all as specified and directed . |
| 131 | Supply and fixing energy saving and environment friendly long life LED security light of 35 W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection including suitable brackets and clamps including connecting of flexible wire twin / three core from ceiling rose to fitting in flexible conduit complete all as specified and directed . |
| 132 | Supply and fixing IP >= 20, Class I, LED tube light fitting 10W (2 ft), CRI>=80, CT.= 5700K, wall / surface mounted integrated type with all accessories internally prewired and including connecting of flexible wire twin / three core from ceiling rose to fitting in flexible conduit complete all as specified and directed . |
| 133 | Supply and fixing sheet metal enclosure (for DB"s when MCBs to be used), single pole and neutral double door with rated bus bar 200 amps, 8 way, 240 Volts without MCB complete all as specified and directed. |
| 134 | Supply and fixing MCBSPN 6-32, Amps, "C" series, 240 volts10 KA rating complete all as specified and directed. |
| 135 | Supply and fixing MCBSP 6-32, Amps, "C" series, 240 volts10 KA rating complete all as specified and directed. |
| 136 | Supply , install, testing and commissioning of exhaust fan, metallic body with front protection guard, 300 mm sweep, 1400 RPM or more, air delivery not less than 1250 CMH, single phase, 240 volt, AC, 50Hz and connecting up complete including provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan in flexible hose and making of suitable size hole in the wall for fixing of the exhaust fan and making good the disturbed surfaces (if any) complete all as specified and directed. (Note: The cost of making hole in wall / other surfaces and making good the disturbed surfaces including any framework or wood work requirred for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the quoted rate.) |
| 137 | Supply and fixing BLDC motor type ceiling fans 1200 mm sweep,min air delivery 210 CFM with service value 6.00 BEE,five star rated with brushless direct current motor , 240 Volts, 50HZ, including provision of 3 core flexible copper conductor cable of size 23/0.19 from ceiling rose to ceiling fan complete fixing arrangement etc complete all as specified and directed. |
| 138 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of 32x6mm sizeby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. |
| 139 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. |
| 140 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 10 Sqmm 4 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. |
| 141 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 16 Sqmm 4 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. |
| 142 | Supply and fixingMCCB of 40 A, 3 pole of 16 KA, 415 volts, 50 Hz suitable for fixing in MCB DB complerte all as specified and directed. (Note: The MCCB will be connected on existing panel of KLP pump house and Ajay bridge.) |
| 143 | Supply, install, testing and commissioning of CPRI approved LT panel board, outdoor, canopy type of size 60cm x 60cm x 30cm, IP54 protection, fabricated with 3.15 mm thick CRCA sheet steel front and rear openable vertical cubical type installed over properly supported leg suitably grouted to PCC with copper bus bar, phase indicator lamps & internal wiring including the following accessories:- INCOMMING (i) MCCB 40 A, 4 Pole, 415 V, 10 KA -01 No. OUTGOING (ii) MCB TPN 25 Amps, 415 Volt, 10 KA-02 No. (ii) Digital ammeter of suitable range with 3 Nos CTs & selector switch -01 Set (iii) Digital voltmeter of suitable range with selector switch -01 Set |
| 144 | Material and labour for cutting of roads / hardstandingupto a size not exceeding 60cm in depth for laying of cable protection pipe including making good the disturbed road / hard standing by providing PCC 1:2:4 type B1 to match the existing surface level complete all as specified and directed. |
| 145 | Supply and laying GI tubing 40mm bore light grade with fittings laid in trenches or for road crossing for protection of LT underground cables including taking up/down unserviceable pipe complete all as specified and as directed. |
| 146 | Supply and fixing 40mm bore galvanised steel water tubing medium grade including all fittings laid in trenches complete all as specified and as direcetd. |
| 147 | Supply and fixing 50mm bore galvanised steel water tubing medium grade including all fittings laid in trenches complete all as specified and as direcetd. |
| 148 | Material and labour for rubber gasket joint for 40 mm pipe including jointing materials complete all as specified and directed. complete all as specified and as direcetd. |
| 149 | Supply and fixing 40 mm bore butterfly valve with flange joints and jointing material complete all as specified and directed. |
| 150 | Supply and fixing 50 mm bore butterfly valve with flange joints and jointing material complete all as specified and directed. |
| 151 | Supply and fixing 40 mm dia Butterfly valve, ISI markedsuitable for CI / GI / DI pipe line including all jointing materials such as washers, nut bolts, rubber packing etc and testing on completion complete all as specified and directed. |
| 152 | Supply and fixing 80mm bore galvanised steel water tubing medium grade including all fittings laid in trenches complete all as specified and as direcetd. |
| 153 | Supply and fixing single phase motor starter panel suitable for 1 HP submercible pump with motor, 230 volt including single phase preventer, digital ammeter, voltmeter complete all as specified and directed. |
| 154 | Supply and fixing single phase motor starter panel suitable for 2 HP submercible pump with motor, 230 volt including single phase preventer, digital ammeter, voltmeter complete all as specified and directed. |
| 155 | Supply and laying submersible flat cable PVC insulated and PVC sheathed LT 1100 volt grade with copper conductor 4 sq mm 3 core complete all as specified and as directed. |
| 156 | Supply and fixing submersible pump, set for tube well with submersible motor water lubricated, electric driven, single phase, 230 volts, 50z AC supply up to 200 feet head and discharge 80 LPM (Approx) of suitable 1 HP capacity complete, including lowering,connecting, commissioning and testingcomplete all as specified and as directed . |
| 157 | Supply and fixing submersible pump, set for tube well with submersible motor water lubricated, electric driven, single phase, 230 volts, 50z AC supply up to 360 feet head and discharge 4.3.33 LPM (Approx) of suitable 2 HP capacity complete, including lowering,connecting, commissioning and testingcomplete all as specified and as directed . |
| 158 | Supply and installation monoblock centrifugal pump of capacity 240 Litres per minute at 10 metre head with motor, single phase 230 volts including nuts, bolts, grouting PCC foundation complete all as specified and as directed . |
| 159 | Supply , Erection andCommissioning of Multi Grade, pressurehaving capacity 4800 ltrs per hour confirming to design code IS 2825 (with latest ammendments) and CPHEEO standard consisting of one vertical cylinder mild steel fabricated pressure vessel of suitable size as per IS -2062 , including face piping , fittings , valves, filter media , under bed plate fitted with PVC strainer , pressure gauge , sample stop cocks , manhole , air vent systems , back washing facility , suitable air compressor with piping work complete including necessery foundation minimum 300 mm height from ground level as recommended by OEM and connected accessories complete with following specifications:- |
| 160 | (a)Flow rate 4800 Ltrs/Hour (b) Vessel dia - As per manufactures specification (c) Working pressure - Minimum 3.5 Kg / Sqcm (d) Test pressure - Minimum 5 Kg / Sqcm (e) Silica sand (course not less than 0.5 mm) and gravel media for filter of required quntity and size as per manufactures specification (f) Frontal pipe a s per manufactures design (g) Fronal valves - 05 Nos minimum (h) Prtessure gauge of glyserine type - 02 Nos (j) Sampling cock - 02 Nos ( Incoming and outgoing point ) (k) Air compressor - As per manufactures specification (Note :- The shell thickness shall be of minimum 6 mm and dished end having minimum 6 mm with MS header and PVC lateral collecting system . Multi grade filter should have redoxide primer with two coats of approved colour synthetic enamel paint on outside and black bituminous paint from inside . The shell also be provided with adequate size of air vent line with valve etc.) |
| 161 | Supply , Erection andCommissioning of Multi Grade, pressurehaving capacity 2600 ltrs per hour confirming to design code IS 2825 (with latest ammendments) and CPHEEO standard consisting of one vertical cylinder mild steel fabricated pressure vessel of suitable size as per IS -2062 , including face piping , fittings , valves, filter media , under bed plate fitted with PVC strainer , pressure gauge , sample stop cocks , manhole , air vent systems , back washing facility , suitable air compressor with piping work complete including necessery foundation minimum 300 mm height from ground level as recommended by OEM and connected accessories complete with following specifications:- |
| 162 | (a)Flow rate 2600 Ltrs/Hour (b) Vessel dia - As per manufactures specification (c) Working pressure - Minimum 3.5 Kg / Sqcm (d) Test pressure - Minimum 5 Kg / Sqcm (e) Silica sand (course not less than 0.5 mm) and gravel media for filter of required quntity and size as per manufactures specification (f) Frontal pipe a s per manufactures design (g) Fronal valves - 05 Nos minimum (h) Prtessure gauge of glyserine type - 02 Nos (j) Sampling cock - 02 Nos ( Incoming and outgoing point ) (k) Air compressor - As per manufactures specification (Note :- The shell thickness shall be of minimum 6 mm and dished end having minimum 6 mm with MS header and PVC lateral collecting system . Multi grade filter should have redoxide primer with two coats of approved colour synthetic enamel paint on outside and black bituminous paint from inside . The shell also be provided with adequate size of air vent line with valve etc.) |
| 163 | Supply & fixing chloronome plant / dozing pump for sodium hypo chlorite solution dual tank system,one for solution preparation and other as service tank including agitator complete with tubing , injection valve and suction valve (maximum injecting pressure 10 Kgs/Sqcm for dozing chemical ) ,low level switch and special function valve,PVC container of capacity 170 Ltrs(Preparation tank) and 100 Ltrs(Service tank) etc. complete all as specified and directed . |
| 164 | Supply, installing, testing and commissioning of diesel engine driven (primemover) coupled with alternator with manual control panel, Multicylinder, inline, 4 stroke cycle, compact, robust and rugged design, turbo charrged, low emmision, high efficiency engines suitable for 5 KVA, 415 volt, 3 phase, 4 wire, coolant cooled, electronic governor, ISO 3046, BS 5514rated for continious running diesel engine complete with and including following accessories:- |
| 165 | (i) Fuel filter (ii) Governor (iii) Complete battery set 12/24 V with lead and lugs as recommended by manufacturer. (iv) Lubricant oil cooler (v) Lubricant oil pump (vi) Lubricant oil filter (vii) Digital oil pressure gauge (viii) Battery charging alternator of suitable capacity. (ix) Dry type air filter (x) MS channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternators and vibration pads. (xi) Coupling guard (xii) Exhaust pipe fully extended to exhaust gases outside the generating room including silencer and necessary insulation lagging with minimum 12 mm dia asbestos rope. (xiii) Fuel tank of sheet steel and suitable capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with calibrated scale on outer surface, floor mounted with suitable angle iron supports. (xiv) Digital RPM meter with hour meter. (xv) Turbo Charger |
| 166 | (xvi) Fuel injection pump. (xvii) Digital coolant temp gauge. (xviii) Self starter with auto electric start accessories. (xix) Engine safety alarm, low lubricant oil pressure and high coolant temperature. (xx) Operating Manual. (xxi) Test certificate. |
| 167 | ALTERNATOR :5 KVA at 0.8 power factor, self excited, self regulated (AVR) with fast response thyristor type, 3 phase, 4 wire, 50 Hz, 415 volt, 1500 RPM, alternator with vaccuum pressure impregnation and epoxy gel coating on the winding and special winding to reduce harmonics, having insulation - H class and ingression protection-IP23, screen protected drip proof free from commutation problem, continious rating, confirming to BS-5000 complete with automatic voltage regulator, output voltage regulated between +1% of set volts and voltage varriation -5% and overload duration / capacity of 10% of one hour is over 12 hours of continue use from no load to full load with following accessories:- . (i)Voltmeter 0-500 V, ISI marked with rotary selector switch - 01 set. (ii) Ammeter digital type ISI marked with CTs and selector switch - 01 set (iii) Frequency meter digital type- 01 No. (iv)Indicating lamp LED based with toggle switches - 01 Set of three. (v) Digital type KWH meter three phase-01 No. (vi) Digital type PF meter three phase-01 No. |
| 168 | Foundation: Foundation complete as per Manufacturer"s design, vibrating pad, including necessary excavation & earthwork in soft / loose soil, sand cushioning, grouting in foundation. |
| 169 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of 25x4mm sizeby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
