|
| 1 | Item Description |
| 2 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Manual Means (Above 6m Depth) |
| 3 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.) |
| 4 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications[C] RCC Grade M 20, { Case-I } Using concrete mixer. Including formwork. |
| 5 | Supplying, fitting and placing TMT bar reinforcement in substructure complete as per drawing and technical specifications. |
| 6 | Providing weep holes in Brick masonry/ Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:2H towards drawing foce. Complete as per drawing and Technical specifications. |
| 7 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment,wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 8 | Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces). |
| 9 | Providing and fixing sign boards made out of 2MM alluminium sheet size 80 x 60Cms. rectangle as per the design of IRC-67- 1977. Pre treated with phospheting process and acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro reflective sheeting as per latest M.O.S.T. Specifications; 3.1M long Stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3MM, 75 x 75 x 6MM as required; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as perthe instruction of engineer in charge. The fixing at site shall be in 1:2:4 C.C. block of size 45 x 45 x 60Cms. for each leg. including excavation, curing etc. complete under the supervision of engineer in charge.[B] Higher Intensity Grade |
| 10 | Type - B, \"THRIE\" : Metal Beam Crash Barrier (Providing and erecting a \"Thrie\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810) |
| 11 | Regulatory / Mandatory Sings:Providing and fixing sign boards Made out of 2MM alluminium sheet size 60Cms. diameter circle as per the design of IRC-67- 1977. Pre treated with phospheting process and acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro reflective sheeting as per latest M.O.S.T. Specifications; 3.1M long Stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3MM, 75 x 75 x 6MM as required; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 C.C. block of size 45 x 45 x 60Cms. for each leg. including excavation, curing etc. complete under the supervision of engineer in charge.B] High Intensity Grade. |
| 12 | Cautionary Warning Sign:Providing and fixing sign boards made out of 2mm alluminium sheet; size 90 x 90 x 90Cms equilateral triangle as per design of IRC-67-1977. Pre treated with phospheting process and acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro reflective sheeting as per latest M.O.S.T. Specifications; 3.1M long Stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3MM, 75 x 75 x 6MM as required; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 C.C. block of size 45 x 45 x 60Cms. for each leg. including excavation, curing etc. complete under the supervision of engineer in charge.[B] High Intensity Grade. |
| 13 | Route Marker Sign/Chevron Board:Made out of 2 mm aluminum sheet size 60x45 cms rectangle plus 30x25 cms additional plate as per the attached drawing (IRC). Pre treated with phospheting process & process & acid etching coated with one coat of epoxy primer and two coats of best quality epoxy paint, reflectorised with retro reflective sheeting as per latest M.O.S.T. specifications. 3.1 m long Stand post and frame fabricated either from suitable size iron angle of 35x35x3 mm & 75x75x6 mm as required painted with best quality epoxy coatingsin black & white bends.The details of numarals for each board shall as per the instruction of engineer incharge. The fixing at site shall be in 1:2:4 C.C. Block of size 45x45x60 cms for each leg. Including excavation curing etc complete under the supervision of Engineer-in-Charge. B) High Intensity grade. |
| 14 | Excavation in ordinary rock by manual means (Excavation in ordinary rock using manual means including loading in a truck and carrying of excavated material to embankment site with in all lifts and leads upto 1000 metres) |
