}

Beautification Of The Entrance Gate Of Teesta-V Power Station, Sikkim At Balutar, singtam-Sikkim

National Hydroelectric Power Corporation Limited has published Beautification Of The Entrance Gate Of Teesta-V Power Station, Sikkim At Balutar. Submission Date for this Tender is 09-01-2023. Civil Work Tenders in singtam Sikkim. Bidders can get complete Tender details and download the document.




Tender Notice

33952043
Corrigendum : Beautification Of The Entrance Gate Of Teesta-V Power Station, Sikkim At Balutar
Open Tender
Indian
Sikkim
singtam
09-01-2023

Tender Details

Beautification Of The Entrance Gate Of Teesta-V Power Station, Sikkim At Balutar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 06-Oct-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 13-10-2022
2 18-Oct-2022 Corrigendum-II Date 01-11-2022
3 05-Nov-2022 Corrigendum-III Date 15-11-2022
4 19-Nov-2022 Corrigendum-IV Date 28-11-2022
5 02-Dec-2022 Corrigendum-V Date 12-12-2022
6 16-Dec-2022 Corrigendum-VI Date 26-12-2022
7 30-Dec-2022 Corrigendum-VII Date 09-01-2023

Key Value

Document Fees
INR 590 /-
EMD
INR 13000.0 /-
Tender Value
INR 6.31 Lakhs /-

BOQ Items

Name of Work :Beautification of the entrance gate of Teesta-V Power station, Sikkim at Balutar.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size).
3Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge).
4Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
5Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Foundation, footings, base of column etc for mass concrete.
6Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Square columns
7Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Beam, lintels, girders, brersumers and cantilevers.
8Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Floor slab, roof slab, landing, balcony and access platform.
9Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete.
10Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical specifications
11Providing and laying first class brick work in half brick thick insuperstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
12Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
13Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
14Stone tile 8mm thick (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. black marble Granite of any colour and shade.
15Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete.1:4 mix.
16Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
17Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
18Providing and fixing NHPC logo (14"*20"), 02 nos., having acrylic sheet with waterproofing led modules and letters in English, WELCOME (9"),TEESTA-V POWER STATION (14") and "NHPC-SINGTAM (GANGTOK)" (9") and in hindi, ??????? (13"), ??????-???? ?????? (14"), ????????-???????(??????) (9") i.e. bilingual having depth of each letter of 2" with 12 Volt power supply and top mirror gold acrylic including nails/screws complete in all respect as per direction of E-I-C.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail