Supply Of Material Including Installation Of Opgw Approach Cable For Construction Of 01 No 220 Kv Badohi Bay -2 Shifting And Loading Of 2.5 Mt Approx. 40 Mm Dia Ms Round Bar On Trailer At 220 Kv S / S Sahupuri. 3 Unloading And Shifting Of 2.5 Mt 40 Mm D, Varanasi-Uttar Pradesh

Supply Of Material Including Installation Of Opgw Approach Cable For Construction Of 01 No 220 Kv Badohi Bay -2 Shifting And Loading Of 2.5 Mt Approx. 40 Mm Dia Ms Round Bar On Trailer At 220 Kv S / S Sahupuri. 3 Unloading And Shifting Of 2.5 Mt 40 Mm Dia Ms Round Bar From Trailer At 220 Kv S / S Sahupuri And Its Proper Stacking There. 4 Laying Of 40 Mm Dia Ms Round Bar 1 Meter Below Ground Level Including Cutting, Bending, Straightening, Welding, And Painting , Excavation, Back Filling And All Associated Work To Complete The Job Satisfactorily As Per Direction Of Engineer In Charge Or Supervising Engineer. ( M.S Round Bar Shall Be Provided By Department ) 5 Fabrication Of Electrodes By 40 Mm Dia Ms Rods In Length Of 3 Meter By Making And Edge At One End For Case In Piercing Below 1200 Mm Into The Ground Using Wooden Hammer Completely At All The Junctions Points Along With Welding And Painting At Outer Periphery Of Earth Mat As Per Relevant Is As Per Direction Of Engineer In Charge Or Supervising Engineer. ( M.S Round Bar Shall Be Provided By Department ) 6 Interconnection Of The Earth Mat Laid With The Existing Earth Mat Of The 220 Kv Sahupuri At 10 Specified Point By Welding As That Complete Earth Mat Acts In Coherent Manner To Provide Proper Earthing Of The Substation. 7 Sorting , Counting, Shifting Of Gi Structure To Loading Point And Loading On Private Vehicle At Efu Naini, Prayagraj ( 14 Mt Approx ) And Also Material Has To Be Handed Over To Contractor. 8 Safely Carriage Of Gi Structure At The Risk Of Contractor ( 14 Mt Approx.. ) From Efu Naini , Prayagraj To 220 Kv S / S Sahupuri ( Approx Distance 150 Km ) Through Private Vehicle Which Has To Be Provided By The Contractor. 9 Unloading Of Structure ( 14 Mt Approx ) From Vehicle, Its Sorting , Counting And Proper Stacking At The Premises Of 220 Kv S / S Sahupuri At Suitable Place. 10 Erection Of Following Equipments Including Shifting Froms Store To Erection Site Including All Other Associated Works To Complete The Job Satisfactorily. The Material Has To Shifted Very Carefully, Any Damage Has To Bear By The Contractor. 11 220 Kv Cb With Structure And Accessories 12 220 Kv Ct 13 220 Kv Cvt 14 220 Kv Li ( With Earth Switch And Including Post Insulator ) 15 220 Kv Ti ( Including Post Insulator ) 16 198 Kv La 17 220 Kv Bus Post Insulator 18 220 Kv Ct Jb 19 220 Kv Cvt Jb 20 220 Kv Duplex Type Control And Relay Panel 21 Interconnection / Jumpering Of Bus Bar To Equipments And Equipment To Equipment To Line ( Ct, Cvt, La, Li, Ti, Line Etc. ) By Single Moose Conductor To Line Conductors Of All Phases. 22 Laying Of Following Sizes Of Control Cable In The Cable Trenches From C&R Panel To Various Equiments, Junction Boxes In The Switchyard As Per Cable Schedule, Its Clamping. Binding At Every Two Meter Distance With Aluminum Sticks 25X1 Mm Size Including Carriage Of Cable Drum From Store To Laying Site And Shifting Back To Store And All The Associated Work To Complete The Job Satisfactorily As Per Tech Specification: 23 2Cx 2.5 Sq.Mm 24 4C X 2.5 Sq Mm 25 6C X 2.5 Sq Mm 26 10C X 2.5 Sq Mm 27 Termination Of Following Size Of Cable As Laid Above As Per Cable Schedule Including Making Necessary Holes In Glands Plate Wherever Required. Supply And Fixing Of Cable Glands Of Appropriate Size. Supply And Fixing Of Ferrules And No. For Each Core Cable And Its Termination With Crimping Type Lugs Of Dowell / Tension And All Other Associated Work To Complete The Job Satisfactorily As Per Tech. Specification. 28 2Cx 2.5 Sq.Mm 29 4C X 2.5 Sq Mm 30 6C X 2.5 Sq Mm 31 10C X 2.5 Sq Mm 32 Cutting, Straightening , Bending , Laying Of 50X6 Mm Ms Flat For Earthing Of Main Structures Including Welding With Main Earthmat Below 500-800 Mm Of Ground Level With Subject To Earth Excavation Of Trenches Its Back Filling, Painting With One Coat Of Red Oxide Primer And Two Coat Of Synthetic Enameled Green Colour With All Cost Of Ms Flat, T&P Required For Completion Of Work. 33 Cutting, Straightening , Bending , Laying Of 75X6 Mm Ms Flat For Earthing Of Main Structures Including Welding With Main Earthmat Below 500-800 Mm Of Ground Level With Subject To Earth Excavation Of Trenches Its Back Filling, Painting With One Coat Of Red Oxide Primer And Two Coat Of Synthetic Enameled Green Colour With All Cost Of Ms Flat, T&P Required For Completion Of Work. 34 Delta Earthing For La Consisting Of 03 Nos. 3 Mtr. Long Electrodes, Its Piercing Inside The Ground And Connection All 03 Nos. Electrodes With 75X10 Mm Ms Flat And Connection Of Same With The Above La Including Cost Of Ms Flat But Excluding The Cost Of Ms Round Bar Which Shall Be Provided By The Department 35 Fabrication Of Display Board Including Providing Made Of M.S Angle Iron 50X50x6 Mm 3 Long Support And M.S Board Of 2X1 Welded On Ms Sheet After Then Ms Pipe Of 1.5 Dia Fitted Around Ms Flat On The Sheet Board On 0.1 Dia Ms Pipe 4Long Welded In Ms Angle Iron Form Two Places Places At One Side And Second At Other To Complete The Display Board Digging Pit Size 1.5X1.5X1.5 And Grouting Above Board With 1:2:4 Cement, Ballast , Sand Ratio And Making Plinth Of Size 1.5X1.5X1.5. Board Shall Duly Painted By Yellow Colour And Equipment Name Board Shall Be Written In Black. 36 Fabricationof Equipment Name Board Including Providing On 16 Gauge Ms Sheet Of Size 9X12 With A Hole Of 5 / 8 In The Top Centre For Fastening And Writing Name Of Equipment In Black Colour On Sheet Which Shall Be Painted With Yellow Colour. 37 Carriage 42 Nos. 70 Kn Disc Insulators Along With Suspension Fitting From The Store Of 220 Kv S / S Sahupuri To The Site Of Under Construction220 Kv Sahupuri-Badohi Bay And Then Fixing Of Single Suspension Fitting For Moose Conductor On 220 Kv Gantry / Including Fitting Of Disc Insulators. All The Cost Of Men And T&P Will Be Provided By The Contractor. 38 Supply 39 Bolted Type Single Suspension Fitting For Moose Conductor As Per Technical Specification And Drawing Confirming To Bis:2486Part-I Suitable For 70 Kn Disc Insulator. 40 Pg Clamp 4 Bolted Type Made Of Aluminum Alloy Lm-6 Suitable For Acsr Moose To Acsr Moose Complete With Hot Dip Galvanised Nuts Bolts Spring And Washer Confirming To Bis: 5561 41 70 Kn Disc Insulator 42 220 Kv Bi-Metallic Pi Clamp Of Aluminum Alloy Lm-6 Suitable For Twin Moose Conductor As Per Technical Specification And Drawing Confirming To Bis:5561 43 40 Mm Ms Rod For Main Earthmat. 44 G.I Nut Bolt Half Threaded And Washer Size 16X40 45 G.I Nut Bolt Half Threaded And Washer Size 16X45 46 G.I Nut Bolt Half Threaded And Washer Size 16X50 47 G.I Nut Bolt Half Threaded And Washer Size 16X55 48 G.I Nut Bolt Half Threaded And Washer Size 16X60 49 Supply Fibre Optic Approach Cable For 24 F Opgw 50 Supply And Installation Of Hardware Set For 24 Fibre ( Dwsm, G 652D ) Fibre Optic Approach Cable 51 Supply Joint Box ( 24 Fibre ) 52 Installation, Termination, Testing In Presence Of Microwave Team And Commissioning Of Fibre Optic Approach Cable For 24F Opgw Alongwith All Necessary Hardware Sets And As Per Instruction And Direction Of Supervising Engineer. 53 Splicing & Installation Of Joint Box ( 24 Fibre ) .

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	13-10-2022	Opening Date Extended	Date	27-10-2022
2	28-10-2022	Opening Date Extended.	Date	08-11-2022

INR 590 /-

INR 9000.0 /-

INR 8.89 Lakhs /-