Construction Of Physics Lab In Govt. Inter College Maholi, Block-Maholiah To Khadanja, Block- Pahla Construction Of Physics Lab In Govt. Inter College Maholi, Block-Maholi
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
19 Sep 2022
0 days left
EMD
27000
Bank guarantee accepted
Document Fee
812
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maholi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Physics Lab In Govt. Inter College Maholi, Block-Maholiah To Khadanja, Block- Pahla Construction Of Physics Lab In Govt. Inter College Maholi, Block-Maholi
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 moutside the periphery of the area cleared. as per DSR NO.2.31 |
| 2 | Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per DSR 2.8.1 |
| 3 | Providing and laying in position cement concrete of 1:6:12 (1 cement : 6 coarse sand : 12 brick aggregate 40 mm nominal size) excluding the cost of centering and shuttering-All work up to plinth level as per SI NO. 273 |
| 4 | Class-150 brick work in 1:6 cement and coarse sandin foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR No-6.1.2 |
| 5 | Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR No-6.1.1 |
| 6 | M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per DSR No-6.4.2 |
| 7 | RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in bed plates excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per DSR No-4.5.1.. |
| 8 | RCC works with cement,approved coarse sand and 20mm (¾\") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per DSR No-5.3 |
| 9 | RCC works with cement,approved coarse sand and 20mm (¾\") gauge approved stone ballast in the proportion 1:1½:3 in slabs excluding supply of reinforcement and its bending the same with 24BG bindingwire including supply of all materials,labour and T & P etc.required for proper completion of the work as per DSR No-5.3 |
| 10 | RCC works with cement,approved coarse sand and 20mm (¾\") gauge approved stone ballast in the proportion 1:1½:3 in lighter beams i.e.having span up to 6 meters excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per DSR No-5.3 |
| 11 | RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC raft foundation and footing excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per DSR No-5.1.2 |
| 12 | RCC works with cement,approved coarse sand and 20mm (¾\") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289. |
| 13 | Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion of work as per DSR No-10.31 |
| 14 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured |
| 15 | Supply and fixing of 35 mm thick Flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts locks,handles,springs fitting as per DSR-9.21.1 |
| 16 | Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300mm long with necessary screws etc.completenas per DSR- 9.62.1 |
| 17 | Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 250mm long with necessary screws etc.completenas per DSR- 9.63.1 |
| 18 | Providing and fixing ISI marked oxidised M.S.door handles 125 mm long conforming to IS:4992 with necessary screws etc.completenas per DSR-9.66.1 |
| 19 | Providing and fixing glass panes with putty and glazing clips in steeel doors,windows,clerestory windows all complete with 4 mm thick galss panes as DSR-10.30.1 |
| 20 | 18 mmthick cement plaster in dado or skirting in 1:3 consisting of one part of cement and 3 parts of approved coarse sand laid in panels,finished with floating coat of neat cement of cement and marble dust in ratio of 5:1 including supply of all materials,labour and T&P etc.required for proper completion of the work as DSR-11.6.1 |
| 21 | 12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:6 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR-13.4.2 |
| 22 | 15 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:6 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR-13.5.2 |
| 23 | Providing and applying white cement based putty of average thickness 2 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.26. |
| 24 | Fixing of door,windows and ventilator frames in position in building including proper adjustment required for proper completion of the work |
| 25 | (a) Door frames |
| 26 | (b) Windows frames |
| 27 | (b) Ventilator frames |
| 28 | Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 &642. |
| 29 | One priming coat and two coat of oil bound distemper on new work including the supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.649 & 650. |
| 30 | S/F of hexagonal fan box with hexagonal side of approx 80 mm in lenth fadricated from 16 SWG M.S.sheet incorporating 10 mm dia M.S.round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid on the RCC roof before concreting along with supply of all materials,labour and T&P etc.for proper completion of work as per DSR 10.18 |
| 31 | Sand filling in plinth under floors including lead upto 50m and lift upto 1.50m including materials,labour and T&P for proper completion of the work as per SI No.255 |
| 32 | Earth filling in plinth including supplly of necessary quantity of earth and embankment to be in 200 mm layers including the ramming and dressing the surface to required levels directed by E/I including proper completion of the work including Royalty as per SI.No.253. |
| 33 | 2.50 cm(1\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾\") graded approved stone laid in panels finished with 3 mm (1/8\") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for properincluding supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601 |
| 34 | Finishing walls with water proofinf cementpaint all complete |
| 35 | Electrification Work |
| 36 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/cokeand salt at least 150mm thick alround etc. as perdirections of Engineer-in-charge complete in all respects as per drawing. |
| 37 | Supply and fixing of 2 number 8 SWG G.I. wire in15mm dia. G.I. pipe for earthing, laid in ground or in wallduly concealed including the cost of cement, sand, labour,T&P other material required for proper completion of thework as directed at site. As per schedule rate |
| 38 | Erection and testing of ceiling fan and regulator etc.excluding supply of down rod, complete in all respect. As per schedule rate |
| 39 | Supply and fixing and concealing of 20 mm dia. 2mm thickPVC conduit pipe with ISI mark embossed and with PVCaccessories confirming to IS No. 3419 for drawing wiresduly sealed at joints with original resin / adhesive to makethe complete piping rigid, plastering with cement sandmortar finished to the level with matching colour washincluding cost of all material labour and T&P etc requiredfor proper completion of the work as per directions and tothe satisfaction of Engineer in charge. As per schedule rate |
| 40 | Supply and fixing of switch box 250 x 300 x 65 mm size ofapproved make made up of 1.0 mm thick ISI MarkedG.P.sheet All 4 corners folded & spot welded for screw andholes plugged with PVC Nylon Caps . Two or more holesfor pipe entry of 25.4 mm on upper and lower sides of thebox. Holes shuld be semi-shuttered type and fitted withheavy brass Earth Piller duly screwed & brand nameshould be embossed. Box flushed in wall including cuttingof brick work, fixing it to the level with cement sandmortar, including matching colour wash with s/o allmaterials, labour and T&P required for proper completionof work as directed at site by the Engineer in charge As per schedule rate |
| 41 | S&F of 16 Amp. 415 V metal clad TP HRC type switch fuseunit complete with HRC fuse on angle iron bracket complete in all respect. As per schedule rate |
| 42 | Supply and fixing of electronic fan regulator 120-280 V. ISImarked, on the existing switch board including makingconnections, required material, labour T&P etc. for propercompletion of work to the satisfaction of Engineer in chargeof work. As per schedule rate |
| 43 | Supply and fixing hexagonal/Round G.P.fan box ofapproved make made up of 1.0 mm thick ISI MarkedG.P.sheet spot welded Four to Eight holes of 25.4 mmfor pipe entry of the box. Holes should be semi-shutteredtype with 0.5 mm G.P. Sheet made upper & lower coverduly screwed fitted with 300 mm round zink coted M.SBar X 12 mm & brand name should be embossed. Fixingwith wiring conduit laid in the R.C.C. roof beforeconcreting alongwith supply of all material, labour, T&Petc. required for proper completion of the work As per schedule rate |
| 44 | S/F Deep Junction Box 76/63 mm As per schedule rate |
| 45 | Wiring points for light with 1.5 sq.mm. FR PVC insulated multistrand single core copper conductor cable in H.G.PVC conduit concealed in the wall with 14 SWG copper eath continity wire,piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backlite sheet etc complete in all respect as directed including matching colour wah as per SI.No.131(c) As per schedule rate |
| 46 | Wiringpointsforfan/ freshairfan(lightdutyexhaustfan)with 1.5sq.mm FRPVC insulatedmultistrand single core copperconductorcable inheavygaugePVC conduit concealed in the wall with 14 SWG copper eath continity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated backlite sheet etc complete in all respects including matching colour wah as per SI.No.133(c). As per schedule rate |
| 47 | Wiringpointsforplugwith1.5sq.mm.FRPVCinsulated multistrandcopper conductorcable inheavygauge PVC conduit pipe concealed inthe wallcomplete with 14 SWG copper eath continity wire, piano type switch & socket etc complete in all respects including matching colour wah as per SI.No.134(c). As per schedule rate |
| 48 | Wiringpointsforexhaustfan with1.5sq.mm. FRPVC insulatedmultistrand copper conductor cable in heavy gauge PVC conduit pipe concealed in the wall completewith14SWGcoppereathcontinitywire,15A pianotype switch& ceilingrose on 3 mm thick phenolic laminated backlite sheet etc complete in all respects including matching colour wah as per SI.No.137(c) As per schedule rate |
| 49 | Supply and fixing of 240 volts\"L\"series miniature circuit breaker 5 Amp.to 32 Amp (10KA) in existing MCB.DB complet with cnnections as required as perSI.No.1002(B). As per schedule rate |
| 50 | S & F surface/Flush mounting 8ways SPN distribution board without additional metal door without MCB complete in all respect, as direct by Engineer in Charge. As per schedule rate |
| 51 | Supplyandfixingofpowerplugwith 15Amp/250Voltflush typewitch and5 pin 15 A/250 Volt flush type universal socket switch in suitable M.S.box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick with brass machine screw and cup washer as per SI.No.1139. As per schedule rate |
| 52 | Supply and wiring of submain with two numbers 2.50 sq.mm FR PVC insulated 1100 V multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC coduit with one number 1.50 sq.mm FR PVC insulated 1100 v grade multistand single core copper conductor as earth continuity wire as per SI.No.1304(c) As per schedule rate |
| 53 | Sanitary work |
| 54 | Making khurars 45x45 cm with average minimum thickness of 5 cm cement concret 1 :2:4 (1 cement :2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.sheet 1 mx1 mx400 micron,finished with 12 mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement,rounding the edges and making and finishing the outlet complet as per DSR-12.22 |
| 55 | Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2 |
| 56 | Providing and fixing wash basin with C.I.brackets,15mm C.P.brass pillar taps.32mm C.P.brass waste of standard pattern,including painting of fitting and brackets,cutting and making good the walls wherever require.White Viterous China flat back wash basin size 550x400mm with single 15mm C.P.brass pillar tap as per DSR 17.7.4 |
| 57 | Providing and fixing P.V.C.waste pipe 32 mm for sink or wash basin including P.V.C.waste fittings complete as per 17.28.1.1 |
| 58 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete as per DSR-17.31 |
| 59 | Providing and fixing 15 mm dia nominal bore brass bib cock of approved quality as per DSR-18.15.1 |
| 60 | Providing and fixing 15 mm dia nominal bore brass stop cock of approved quality as per DSR-18.16.1 |
| 61 | Providing and fixing 15 mm dia 450 mm long unplasticised PVC connection pipe with brass unions as perDSRD -18.21.2.1 |
| 62 | supply and fixing of sink with Bib cock c.p brass |
| 63 | Add G.S.T. @ 12.00% |
AI Tender Summary
Tender Timeline
Sep 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender