|
| 1 | Earth work : |
| 2 | Earth work in all kinds of soil within 50 M initial lead and 1.5 M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm. And laying in layers not exceeding 0.3 M in depth and as per direction of the Engineer-in-charge. |
| 3 | upto 1.50m initial lift |
| 4 | Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, royality, loading & unloading as per specification & direction of EIC. |
| 5 | Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC. |
| 6 | Providing all materials, labour, T&P for laying of centrifugally cast (Spun) Ductile Iron pressure pipes for water works purpose with socket & spigot ends confirming to IS-8329/2000 with 3rd revision in standard lengths for classification K-9 suitable for push on joints (Rubber Gasket \"D\" jointing) with outside zinc coating as per IS-8329/2000 including alligning the pipes inside trench as per IS-12288/1987 including testing the pipe line with required water pressure as per IS-8329/2000 amendment 1st, Sep. 2011 etc.all complete as per specification & direction of EIC (Excluding cost for earth work, jointing of specials, rubber gasket & fittings which shall be paid separately). |
| 7 | 200mm dia (NB) S/S pipe K-9 suitable for push-on joint |
| 8 | 500mm dia (NB) S/S pipe K-9 suitable for push-on joint |
| 9 | Providing all labour, T&P and making push-on joint with rubber gasket ring as per IS-5382/1985 1st Revision suitable for D.I pipe and fittings of the following nominal dia including testing of the joints with required water pressure (The cost is inclusive of cost of ring) and all complete as per specification & direction of E.I.C. |
| 10 | Rubber Gasket (EPDM/SBR) suitable for 200mm dia D.I pipes & fittings with ISI mark. |
| 11 | Labour only |
| 12 | Providing all materials, labour, T&P and laying in trenches following D.I fittings & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. confirming to IS-9523:2000, 1st revision with pressure rating PN-1.0 of following nominal diameter, all complete including test the joints with required water pressure as per specification & direction of EIC. (Excluding cost of earth work in trenches, back filling & rubber gasket) |
| 13 | 500mm x 500mm x 200 mm A/S Tee |
| 14 | 500 mm MJ Collar |
| 15 | 200mmx 90° Double Socket Bend |
| 16 | 200 mmx 45°Double Socket Bend |
| 17 | 200 mmx 22½° Double Socket Bend |
| 18 | 200 mm Flanged Socket |
| 19 | 200 mm Flanged Spigot |
| 20 | 200 mm MJ Collar |
| 21 | Providing, fitting & fixing of following size valves as per IS specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. |
| 22 | 500mm dia D.I Sluice valve (Non rising spindle) of PN-1.0 as per IS-14846/2000 with ISI mark. |
| 23 | 200mm dia D.I Sluice valve (Non rising spindle) of PN-1.0 as per IS-14846/2000 with ISI mark. |
| 24 | Providing all materials, labour T&P for construction of Valve chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:4 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame (SFRC medium duty) for opening of 500mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge. |
| 25 | Inner size 1500mmx1200mmx1500mm height |
| 26 | Construction of RCC M-20 thrust block of following minimum size having minimum cube strength 200Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel centering materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed, PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing etc. all complete as per specification & direction of EIC. |
| 27 | RCC Thrust block of size 1000mm x 1000mm x 1000mm height |
| 28 | Providing all materials , labour, T&P for making flange joints with the pipes & fittings including supply of required & approved size of M.S. nuts & bolts, washer & rubber insertion & paints etc. including testing the joints with required water pressure etc. all complete as per specification & direction of EIC. |
| 29 | 200mm dia Flange Joint |
| 30 | Providing,fitting & Fixing of smart water meter suitable for following pipe lines with IOT Technology using LORA or NBIOT technology & related infrastructure work. |
| 31 | 200mm size water meter |
| 32 | Cutting asphalt or bituminous road for taking the sewer line through and making good to the damages including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. (15cm thick) |
| 33 | Cutting metalledroad for taking the sewer line through and making good to the damages including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. (30cm thick) |
| 34 | Cutting CCroad for taking the sewer line through and making good to the damages including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. (30cm thick) |
| 35 | Cement concrete (1:3:6) with 4 cm size crusher brocken hard granite metal including cost of all labour,materials with all lead,T&P etc.all complete.for mending road work. |
| 36 | Providing all materials, labour T&P for laying of following dia MS pipes with required size of fittings, like off set, bend, tapper etc. as per site condition for water works purpose, including gas cutting by oxygen and acetylene gas flame, fitting and setting as per required size to IS specificationand electrodes confirming to IS specificationafter \"V\" grove cutting including cost of hire and running chargesof weldinggenerator set etc,(The pipes shall be painted with two or more coats of approved anticorrosive Epoxy paint of approved shade) and aligning the pipes below/ above the ground level as per site condition.Earth work excavationin all kinds of soil/ rock of required depth and width, back filling, dewatering wherever necessary, shoring and shutting etc. for the work The cost inclusive of all taxes, duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables etc. including testing the joint with required water pressure etc all complete as per specification and direction of EIC. |
| 37 | 200mm dia (NB)MS Pipe of wall thickness 6.3mm as per IS 3589/ 2001. |
| 38 | Providing all materials, labour, T&P for fixing MS flanges suitable for following dia MS pipe including cutting the pipes by oxygen and acetelene gas flames as per the required size and slope and electric welding the same with the pipes as per IS specification including cost for hire and running charges of all machine with POL. The flanges shall be made out of following thickness plate after cutting as per required size and shape, drilling of bolt holes as per IS specification, painting the same with two or more coats of anticorrossive paint (Epoxy), the cost inclusive of hire & running charges of machineries, POL, To & Fro charges with all consumables, testing of the joints with required water pressure etc. all complete as per specification and direction of EIC. |
| 39 | MS flange (12mm thick) suitable for 200mm dia (NB) MS pipe as per IS 6392/1971. |
| 40 | MS 200mm 90 degree bend |
| 41 | MS 200mm offset bend |
| 42 | GST as applicable extra |
