}

Detail Design, Drawing, Construction, Installation, Commissioning, Trial Run ( 3 Months ) And Operation & Maintenance For 60 Months Including Supply Of Coagulants And Disinfectants As Required For 15 Mgd Capacity ( 23 Hrs. Operation ) Surface Wate, kolkata-West Bengal

Kolkata Metropolitan Development Authority-KMDA has published Detail Design, Drawing, Construction, Installation, Commissioning, Trial Run ( 3 Months ) And Operation & Maintenance For 60 Months Including Supply Of Coagulants And Disinfectants As Required For 15 Mgd Capacity ( 23 Hrs. Operation ) Surface Wate. Submission Date for this Tender is 14-10-2022. Cleaning and Disinfecting Solutions Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

33895464
Corrigendum : Detail Design, Drawing, Construction, Installation, Commissioning, Trial Run ( 3 Months ) And Operation & Maintenance For 60 Months Including Supply Of Coagulants And Disinfectants As Required For 15 Mgd Capacity ( 23 Hrs. Operation ) Surface Wate
Open Tender
Indian
West Bengal
kolkata
14-10-2022

Tender Details

Detail Design, Drawing, Construction, Installation, Commissioning, Trial Run ( 3 Months ) And Operation & Maintenance For 60 Months Including Supply Of Coagulants And Disinfectants As Required For 15 Mgd Capacity ( 23 Hrs. Operation ) Surface Water Treatment Plant With 10 % Overloading ( Both Civil & Electro-Mechanical Work ) With Space Saving Technology With Treated Water Quality Of Less Than 1 Ntu And 1.50 Mg Clear Water Underground Reservoir ( Both Civil & Electro-Mechanical Work ) And Allied Works All Complete At Salkia, Ward No-3, Of Hmc Area On Turnkey Basis Under Amrut 2.0

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 20-Sep-2022 Prebid Other 14-10-2022

Key Value

Document Fees
Refer document
EMD
INR 12000000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Detail design, drawing, Construction,Installation, Commissioning, Trial Run (3 months) and operation & Maintenance for 60 months including supply of coagulants and disinfectants as required for 15 MGD capacity (23 hrs. operation) Surface Water Treatment Plant with 10 % overloading (Both Civil & Electro-Mechanical work) with space saving technology with treated water quality of less than 1 NTU and 1.50 MG Clear Water Underground Reservoir (Both Civil & Electro-Mechanical work) and allied works all complete at Salkia, ward No-3, of HMC area on Turnkey basis under AMRUT 2.0
Sl. No. Item Description
1A. LUMP SUM PRICES FOR THE MAIN PLANT RAW WATER INLET ARRANGEMENTS INCLUDING INTER CONNECTION WITHDEPARTMENTAL RAW WATER RISING MAIN BY INSTALLATION OFFLOW CONTROLVALVES.
2Civil Works
3MAIN AND SECONDARY FEED CHANNELS AND / OR PIPES FOR DELIVERING WATER TOFLASH MIXER AND CLARIFIERS INCLUDING ARRANGEMENTS FORFLOWMEASUREMENTS INCLUDING RAW FLOW METER, CONTROL SLUICE GATES FORFLOWREGULATION AND CLARIFIERBYPASS AND SLUICE VALVE FOR FILTERBY PASS.
4Civil Works
5CHLORINATINGARRANGEMENTS FOR PRE ANDPOSTCHLORINATION.
6Civil Works
7CHEMICAL HOUSE ANDDOSING EQUIPMENT INCLUDING : COAGULANTAGITATORS COAGULANTSOLUTIONSTRAINERS LOCALLEVEL INDICATOR COAGULANTDOSINGEQUIPMENT ALUMHOISTS ALUM CHARGINGBASKETS HANDCARTS 1000 KG. WEIGHINGMACHINES LIQUID COAGULANT TANK CONSTRUCTED AT GROUND LEVEL OF CHEMICAL HOUSE& NECESSARY PUMPING ARRANGEMENT FROM COAGULANT TANK TO COLLECTION WELL TO BE PROVIDED WITH ROTAMETER. WATERAND COAGULANT SOLUTIONPIPING LABORATORYFURNITURE &SINKS
8Civil Works
9FLASHMIXINGCHAMBERSINCLUDING C.I. SLUICE / PRENSTOCKS,EQUIPMENTFORFLASH MIXING ANDDESLUDGING ARRANGEMENTS.
10Civil Works
1107 NOS MECHANICAL FLOCCULATOR UNITS ALONG WITH ALL ALLIED CIVIL/ELECTROMECHANICAL & WASHING ACCESSORIES COMPLETE IN ALL RESPECT INCLUDING CHANNELS OR PIPES TO PLATE SETTLER UNIT AS PER REQUIREMENTS.
12Civil Works
1307 NOS PLATE SETTLER UNITS ALONG WITH ALL ALLIED CIVIL/ELECTRO –MECHANICAL & WASHING ACCESSORIES COMPLETE IN ALL RESPECT INCLUDING CHANNELS OR PIPES TO FILTER HOUSE AS PER REQUIREMENTS.
14Civil Works
15FILTERHOUSEWITH 07 NOS TWIN TYPEFILTERBEDSWITH REQUIRED SAND BED AREAANDENTRANCE BUILDINGWITH EQUIPMENT INCLUDING. INLET ANDOUTLET PIPING PNEUMATICALLYORELECTRICALLYOPERATEDSLUICEVALVES AND SLUICE GATES. FILTERFLOOR EQUIPMENTANDFILTERMEDIA OUTLET CONTROLLERS / FILTRATE OUTLETARRANGEMENTS. SLOW START EQUIPMENT. LOSS OFHEADAND RATE OFFLOW INDICATORS. FILTER CONTROL TABLES BACKWASH WATER PUMPS INCLUDINGMOTORS AND PIPING. EQUIPMENTFOR DRAININGOFLIGHTPARTICLESOF IMPURITIES SURFACEWASHDEVICE. AIR BLOWERSINCLUDING MOTORSANDPIPING WASHWATERMETER.
16Civil Works
17ARRANGEMENTS FOR REUSE OF FILTER WASTEWATERINCLUDINGPUMPS ANDPIPING.
18Civil Works
19FLOW METER FOR MEASURINGFILTERED WATER OUTPUT.
20Civil Works
21PLANT WASTE WATER DISPOSALSYSTEM WITH MINIMUM 300 MM DIA C.I. PIPES WITH 2 NOS SLUICE GATES OF REQUIRED SIZE, WITH SUBMERCIBLE PUMPS WITH SPECIAL INTAKE ARRANGEMNT FOR PUMPING SUPERNATANT SLUDGE WATER FROM SLUDGEPONDSTO COLLECTING WELL.
22Civil Works
23LABORTORY EQUIPMENTS, SAMPLING TABLE AND TOOL BOX CONTAINING TOOLS AND ELECTRICAL EQUIPMENTS. CHLORINE GAS HANDLING SAFETY TOOL BOX WITH UNIFORMS AND GAS CYLINDER (2 NOS) WITH MASKS.
24Civil Works
25SCALED MODEL (1:200) ANDANIMATED FLOWDIAGRAM
26Civil Works
27FILTEREDWATER CONVEYANCESYSTEMWITH CONNECTION TO 1.5 MGUGRFROMFILTER HOUSE.
28Civil Works
29ANNUNTIATION PANEL FOR MOTOR CONTROL CENTRE.
30Civil Works
31EQUIPMENT FORMOTOR CONTROL CENTRE INCLUDINGSTARTERS FORALLMOTORS.
32Civil Works
33ROADWEIGHBRIDGE (40MT CAPACITY) WITH COMPUTER PRINTING FACILITY.
34Civil Works
35LEVELLING ANDGRADING OF THESITE INTHEPLANTAREA INCLUDING RAIN WATERDRAINAGE, SURFACE DRAINAGE AND APPROACH ROAD (4M WIDE- BITUMINOUS) TO SITE & DIFFERENT UNITS OF WTP.
36Civil Works
37C.I. /R.C.C.SLUDGE PIPELINE OF MINIMUM 300 MM DIA FROM SLUDGE PRODUCING UNITS TO SLUDGE TANKS AND NECESSARY PENSTOCK GATES AND VALVE ARRANGEMENT FOR FILIING OTHERLOW LAND AREAS.
38Civil Works
392.1M HIGH RCC FRAMED MASONRY BOUNDARY WALL WITH BARBED WIRE AND THREE MS ORNAMENTAL GATES ALONG WITH CURVED GLOW SIGN BOARD ON GATES IN THE BOUNDARY OF WTP
40Civil Works
41DESIGNING , DRAWING, PROVIDING AND CONSTRUCTION OF A COVERED RCC UNDERGROUND CLEAR WATER RESERVOIR OF UNDISTURBED CAPACITY OF 1.5 MG IN TWO CPMPARTMENTS WITH THREE PENSTOCK GATES OF SUITABLE SIZES AS APPROVED . ADEQUATE NOS COWL VENTS, APRON INCLUDING COST OF DEEP CAST-IN-SITU RCC PILES, EARTH WORK IN EXCAVATION AND FILLING WITH THE EXAVATED AND GOOD CARRIED EARTH OF APPROVED QUALITY AS MAY BE REQUIRED, SAND FILLING, SHORING/ SHEET PILLING, DEWATERING, COST OF TWO NUMBERS BUTTERFLY VALVES, WELL POINTS ETC. ALL COMPLETE AS PER SPECIFICATIONS GIVEN IN THE TENDER DOCUMENTS (VOLUME I) AND AS PER APPROVED DRAWINGS AND DIRECTION OF THE EIC. A) PILING WORK INCLUDING PILE TESTING B) ALL OTHER WORKS
42Civil Works
43DESIGNING , DRAWING, PROVIDING AND CONSTRUCTION OF A PUMP HOUSE FOR WET PIT PUMPS AND MOTORS AND ALLIEDBUILDINGS INCLUDING EOT CRANE (7.5 MT) & Auxiliary HOT (2MT) crane, FOUNDATIONSAND SPACES AS PER DRAWINGS AND SPECIFICATIONS, UNLOADING BAY, COMMON PUMP SUMP AS SHOWN IN TENDER DRAWING INCLUDING THE COST OF DEEP CAST-IN-SITU RCC PILES, EARTH WORK IN EXCAVATION AND FILLING WITH THE EXAVATED AND GOOD CARRIED EARTH OF APPROVED QUALITY AS MAY BE REQUIRED, SAND FILLING, SHORING/ SHEET PILLING, DEWATERING, WELL POINTS ETC. ALL COMPLETE AS PER SPECIFICATIONS GIVEN IN THE TENDER DOCUMENTS (VOLUME I) AND AS PER APPROVED DRAWINGS AND DIRECTION OF THE EIC. A) PILING WORK INCLUDING PILE TESTING B) ALL OTHER WORKS INCLUDING EOT CRANE
44Civil Works
45DESIGNING , DRAWING, PROVIDING AND CONSTRUCTION OF A SUB-STATION BUILDING OVER PILE FOUNDATION
46Civil Works
47CONSTRUCTION OF 2 NOS SLUDGE POND OF EACH CAPACITY 5750 CUM WITH RCC LINING
48Civil Works
49CONNECTION WITH PROPOSED RAW WATER RISING MAIN OF 750 MM DIA WITH MS 750MM DIA OF LENGTH 10M (APPROX.) AND 1 NO MS PIPE OF 800MM DIA AS CLEAR WATER CONVEYANCE MAIN BEYOND CWR OF LENGTH 15 M (APPROX.)
50Civil Works
51Dewatering, Site clearances by old structures and levelling of the area after development of site with carried earth /silver sand up to formation ground level.
52Electro-Mechanical Works: Part-I WTP
53Supply ,fitting , fixing & commissioningof inlet pipe along with 2 nos . BFVas required and other accessories, etc .to complete the collecting well as per CPHEEO guidelineand as per satisfaction of the EIC. Ratingsand price breakup to be finalised during detailed engineeringandapproval .
54Supply ,fitting , fixing& commissioningofultra-sonic flowindicator along with other accessories, cabling , etc as requiredat the venturi flume portion as per CPHEEO guidelineand as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringandapproval .
55Supply ,fitting , fixing& commissioningof allthe entire electro mechanical parts , of flash mixture etc as required as per CPHEEOguidelineand as per satisfaction of the EIC. Ratingsand price breakup to be finalised during detailed engineeringandapproval
56Supply ,fitting , fixing& commissioningof allthe entire electro mechanical parts , gates , flocculators, motors, panels , weirs,ultra sonic flow sensor , plates & scrapper(in case of plate settlers), clariflocculator bridge and carriage mechanism including drive, flocculator drives, paddlesall complete ( in case of clariflocculator ) , desludge system, etcasrequired to complete the job as per CPHEEO guideline and as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringandapproval .
57Supply ,fitting , fixing& commissioningof allthe entire electro mechanical parts , gates , valves , under drainage system ,control console, level sensors, flow control system etc as requiredat the filter bed portion of the filter house , all completeas per CPHEEOguidelineand as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringandapproval .
58Supply ,fitting , fixing& commissioningof allthe entire electro mechanical parts like recirculation pump, blower, backwash pump (or OHR filling pump in case of constant head tank type back washing ) , air compressor for pneumatic valves if required , pre & post chlorination pump, OHR filling pump, alum dosing pump, surface wash pump, de-watering pump, crane or hoist , supernatent pump, as requiredetc. along with all the accessories as requiredto completethe job as per CPHEEO guidelineand as per satisfaction of the EIC. Ratingsand price breakup to be finalised during detailed engineeringandapproval .
59Supply ,fitting , fixing& commissioningof allthe entire electro mechanical portion of the WTP like Power distribution board (PDB) cum Motor control Center (MCC), Control desk, Inverter, UPS , cabling , trays , MIMIC ,Instruments, sensors, meter, earthing etc.alongwith all accessories as required as per CPHEEO guideline and as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringandapproval .
60Supply ,fitting , fixing& commissioningofallthe entire electro mechanical portionof thesludge disposal system / re-circulationsystem,including sludge pumps, blowers ,valves , diffusers, MCC, etc all complete including centrifuge if required, supernatent pumps, submersible pumps, pipe lines, hoist , etc. all complete as required as per CPHEEO guideline and as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringandapproval .
61Supply ,fitting , fixing& commissioningofallthe entire electro mechanical portion of the chemical house including pre and post chlorination system including chlorinators, alum dosing systemincludingalum agitators , poly dosing system if required,hoists, weighing machine, SS alum lifting trays,toners, trunions, chlorine leak detection system , neutralizing system, dosing pumps ,rotameters, safety equipmentsetc. as required to complete the chemical houseas per CPHEEO guidelinesand as per satisfaction of the EIC. Ratingsand price breakup to be finalised during detailed engineeringandapproval .
62Supply ,fitting , fixing& commissioningofallthe entire electro mechanical portion of the laboratory including all meters and instruments etc . as per CPHEEO guidelinesand as per satisfaction of the EIC.Ratings and price breakup to be finalised during detailed engineeringandapproval .
63Supply ,fitting , fixing& commissioningofallthe entire electro mechanical portion of the pitless weigh bridge as required and as per CPHEEO guidelinesand as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringandapproval .
64Supply ,fitting , fixing& commissioningofallthe electro mechanical portion the ultrasonic flow meter at the outlet of the clear water channelof the filter house leading to the UGR of the CWPS as per CPHEEO guidelines and as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringand approval .
65Supply ,fitting , fixing& commissioningofallthe entireindoor and out door illumination,earthing,glow sign , indicationsetsas per IS standard and as per satisfaction of the EIC.Ratingsand price breakup to be finalised during detailed engineeringandapproval.
66Electro-Mechanical Works: Part-II SUB STATION
67PART – A ( SUPPLY PART )
68Supply, delivery at site and storage of 1250 KVA, 11.0 KV / 433 V ONAN indoor type Transformers with neutral brought out as per technical specification and all accessories complete
69Supply, delivery at site and storage of 03 panel, 25 KA for 3 sec., 800 A , 11 KV indoor type H.T. Vacuum Circuit Breaker as per specification with all inter connection
70Supply, delivery at site and storage of multi panel 2000 AMV Switch board connected with the secondary side of 1250 KVA, 02 nos. transformers suitable for operation at 415 volt, 3 phase, 50 Hz AC system with all interconnection complete as per specification
71Supply, delivery at site and storage of 110 V, 100Ah, sealed maintenance free battery comprising of 55 nos., 2 Volts cells with float and boost charger cum DCDB
72Supply, Delivery at site and storage of 440V, 200 KVAR or as required rating, 12 stage automatic power factor improvement capacitor bank ( APFC ) with all inter connection complete suitable for 415 V, 50 Hz system as per specification for WTP load.
73Supply, delivery at site and storage of H.T.,M.V. & Control Cable as per specification & as follows
74i) H.T. Cable
75From WBSEDCL’s / CESC’s summation panel to incoming panel of HT Switch gear of 11 KV grade, 300 sq mm dia (to withstand maximum fault current for 1 sec. ) Al. conductor, XLPE cable armoured as per specification
76From HT Switchgear to two numbers of 1250 KVA Transformer HV side terminal of 11 KV grade, 300 sq mm dia, Al conductor, XLPE insulated, armoured cable as per specification
77ii) M.V. Cables
78From two numbers of 1250 KVA transformer secondary side to the two number of 2000A incomers of MV Switchboard, Bus Duct & accessories with adequate size of Aluminium conductor complete with sealing as per specification; direction of E.I.C.
79From each of the 800 A outgoing ACB of2000 A Sub-station MV Switchboard to respective incoming ACB of MV Panel at Water Treatment Plant (WTP), 1.1 KV grade, 3.5 C,240 x 4 Run sq mm, Al. conductor, XLPE insulated armoredcable.
80From two numbers of 1600 A outgoing ACB of2000 A Sub-station MV Switchboard to respective to the two number of 1600A incomers of MV Switchboard of Clear Water Pumping Station (CWPS) , 1.1 voltage grade 3.5C x 240 x 6 Run sq mm, Al. conductor, XLPE insulated armoredcable.
81From 2000 A Substation MV Switchboard to Battery Charger, 1.1 KV grade, 4 C x 6 sq mm stranded Cu conductor, XLPE insulated armoured cable
82From Battery Charger / DCDB to 03 Panel HT VCB, 2000 A MV Panel, MV Panel at WTP and CWPS, 1.1 KV grade, 3 C X 2.5 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
83From 2000A Sub-station MV Switchboard to ventilation system, 1.1 KV grade, 4 C x 6 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
84From 2000 A Substation MV Switchboard to Lighting DB, 1.1 KV grade 4 C x 6 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
85From 2000 Substation MV Switchboard to HT Switchgear, 1.1 KV grade 3 C x 2.5 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
86iii Control Cable
87Stranded copper conductor of various ratings and of suitable sizes as per specification for all control circuit and interlocking circuits at Substation
88Supply, delivery at site and storage of Jointing Materials as per specification & as follows:
89All H.T Cables jointing materials ( Dry type, Heat Shrink Joint )
90All MV Cables jointing materials for different Cross sections ( Dry type )
91All copper control& power Cables jointing materials for different cross sections ( Dry type)
92N.B :- No extra payment would be made if the length and diameter of the different sizes of cable varies on the higher side to meet up the requirement of the specification and site condition. Rates must be quoted carefully. This is also applicable for all type of cable joints.
93Supply & delivery at site and storage of earthing equipment as per specification and all the other equipments required to comply with latest I.E. Rules
94Supply, delivery at site and storage of fire extinguishers as follows:
95Dry Powder ( 5 Kg each )
96CO2 ( 4.5 Kgeach )
97Supply & delivery at site and storage of Misc. items such as rubber mats, Shock Treatment Chart, danger boards, sand buckets, LED Glow sign board etc. as per specification
98Supply & delivery at site and storage of all LED luminaries, fittings, fixtures complete with necessary multi-strand copper wires for inside & outside lighting of Substation as per specification
99Supply & delivery at site and storage of Lightning arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rules
100Supply & delivery at site and storage of spare parts as per specification
101Supply & delivery at site and storage of 2 nos. 1200 mm Celling Fan, 2 nos. 450 mm pedestal Fan, 5 nos. 300 mm. exhaust Fan and 4 nos. PVC Chair.
102PART – B ( INSTALLATION PART )
103Installation at site of 1250 KVA, 11 KV / 433 V ONAN indoor type Transformers with neutral brought out as per technical specification and all accessories complete
104Installation at site of 3 panel, 25 KA for 3 sec., 11.0 KV indoor type H.T. Vacuum Circuit Breaker as per specification with all inter connection
105Installation at site of multi panel 2000 AMV Switch board connected with the secondary side of 1250 KVA transformers suitable for operation at 415 volt, 3 phase, 50 Hz AC system with all interconnection complete as per specification
106Installation at site of 110 V, 100Ah, sealed maintenance free battery comprising of 55 nos., 2 Volts cells with float and boost charger cum DCDB
107Installation at site of 440V, 200 KVAR or as suitable rating, 12 stage automatic power factor improvement capacitor bank ( APFC ) with all inter connection complete suitable for 415 V, 50 Hz system as per specification
108Laying at site of H.T., M.V. & Control Cable as per specification & as follows :-
109i) H.T. Cable
110From WBSEDCL’s / CESC’s summation panel to incoming panel of HT Switch gear of 11 KV grade, 300 sq mm dia ( to withstand maximum fault current for 1 sec. ) Al. conductor, XLPE cable armoured as per specification
111From HT Switchgear to two numbers of 1250 KVA Transformer HV side terminal of 11 KV grade, 300 sq mm dia, Al conductor, XLPE insulated, armoured cable as per specification
112ii) M.V. Cables/ BUS DUCT
113From two numbers of 1250 KVA transformer secondary side to the two number of 2000A incomers of MV Switchboard, Bus Duct &accessories with adequate size of Aluminium conductor complete with sealing as per specification &direction of E.I.C.
114From each of the 800 A outgoing ACB of2000 A Sub-station MV Switchboard to respective incoming ACB of MV Panel at Water Treatment Plant (WTP), 1.1 KV grade, 3.5 C,240 x 4 Run sq mm, Al. conductor, XLPE insulated armoredcable.
115From two numbers of 1600 A outgoing ACB of2000 A Sub-station MV Switchboard to respective to the two number of 1600A incomers of MV Switchboard of Clear Water Pumping Station (CWPS) , 1.1 voltage grade 3.5C x 240 x 6 Run sq mm, Al. conductor, XLPE insulated armoredcable.
116From 2000 A Substation MV Switchboard to Battery Charger, 1.1 KV grade, 4 C x 6 sq mm stranded Cu conductor, XLPE insulated armoured cable
117From Battery Charger / DCDB to 03 Panel HT VCB, 2000 A MV Panel, MV Panel at WTP and CWPS, 1.1 KV grade, 3 C X 2.5 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
118From 2000 A Sub-station MV Switchboard to ventilation system, 1.1 KV grade, 4 C x 6 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
119From 2000 A Substation MV Switchboard to Lighting DB, 1.1 KV grade 4 C x 6 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
120From 2000 A Substation MV Switchboard to HT Switchgear, 1.1 KV grade 3 C x 2.5 sq mm stranded Cu. Conductor, XLPE insulated armoured cable
121iii) Control Cable
122Stranded copper conductor of various ratings and of suitable sizes as per specification for all control circuit and interlocking circuits at Substation
123Installation at site of Jointing Materials as per specification & as follows:
124All H.T Cables jointing materials ( Dry type, Heat Shrink Joint )
125All MV Cables jointing materials for different Cross sections ( Dry type )
126All copper control& power Cables jointing materials for different cross sections ( Dry type)
127N.B :- No extra payment would be made if the length and diameter of the different sizes of cable varies on the higher side to meet up the requirement of the specification and site condition. Rates must be quoted carefully. This is also applicable for all type of cable joints.
128Installation at site of earthing equipment as per specification and all the other equipments required to comply with latest I.E. Rule
129Installation at siteof fire extinguishers as follows:
130Dry Powder ( 5 Kg each )
131CO2 ( 4.5 Kgeach )
132Installation at site of Misc. items such as rubber mats, Shock Treatment Chart, danger boards, sand buckets, LED Glow sign board etc. as per specification
133Installation at site of all luminaries, fittings, fixtures complete with necessary multi-strand copper wires for inside and outside LED lighting of Substation as per specification
134Installation at site of Lightning arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rules
135Installation at site and storage of 2 nos. 1200 mm Celling Fan, 2 nos. 450 mm pedestal Fan, 5 nos. 300 mm. exhaust Fan and 4 nos. PVC Chair.
136Carrying out heat run of HT & MV equipments, dehydration of Transformer oil and making ready all HT / MV equipment for High / Medium pressure testing as per rule
137Carrying out statutory high pressure testing on all HT equipment & medium pressure testing on MV equipments as per specification including charges of Govt. Inspector
138Charges for Diesel Generator set / Temporary power connection from WBSEDCL / CESC for construction purposes
139Testing of the whole installation & submission of test reports as per specification & direction of EIC
140Electro-Mechanical Works: Part-III CWPS
141PART – A ( SUPPLY PART )
142Supply, delivery at site & storage of vertical turbine pumps with column assembly, discharge head, sole plate, motor stool and all other accessories all complete of suitable capacity and 60 Mtrs. TDH as per specification and Technical offer. Maximum allowable speed of pump shall be 1500 R.P.M.
143Supply, delivery at site & storage of MS pipes, specials, joints, flanges & common delivery manifold with extended pipe line as per specification and Technical offer.
144Supply, delivery at site & storage of valves complete with fixture as per specification and Technical offer & as follows.
145Butterfly valve for delivery side of pumps fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line
146Non-Return Valve for individual pump delivery pipe line
147Butterfly valve fitted withelectrical actuator suitable forlocal and control desk operation and display system for common delivery manifold
148Double throat air valve with Isolating Valve at common delivery manifold as per specification
149Supply, delivery at site and storage of M.S. dismantling joint assembly forcommon delivery manifold as per specification and Technical offer
150Supply, delivery at site and storage of M.S. dismantling joint assembly for the individual pump delivery pipe line as per specification and Technical offer.
151Supply, delivery at site and storage of M.S. puddle collar / plate for common delivery manifold as per specification.
152Supply, delivery at site and storage of Full bore electromagnetic type Flow meter, Recorder, Totaliser as per specification and Technical offer.
153Supply, delivery at site and storage of Pressure gauges complete with fittings and fixture as per specification and Technical offer & as follows.
154Pressure gauge for Delivery side (0– 10 Kg / cm2)
155Pressure gauge for common delivery manifold(0 – 10 Kg / cm2 )
156Supply, delivery at site and storage of pressure transmitter and level indicator complete with fitting and fixture as per specification and Technical offer & as follows.
157Pressure transmitter for delivery side ( 0 – 10 Kg / cm2 )
158Pressure transmitter for common delivery manifold( 0 – 10 Kg / cm2 )
159Radar type Level Monitoring system for CWR / Sump Water Level complete with all accessories
160Supply, delivery at site and storage ofVerticalsquirrel-cage TEFC / CACA motor rated at 415 V ±10%, 50Hz ±5%, 3Ph, 1500 R.P.M.(syn.) of adequate capacity to match the pump at sl. no. 1) complete with coupling hub and all other accessories as per specification & Technical offer ( Rating not less than 200 KV )
161Supply, delivery at site and storage of M.V. Panel of 1600A capacity at Pump House, suitable for operation at 415 Volts, ±10%, 3 Phase, 50 Hz, ±5% AC system as per specification
162Supply, delivery at site & storage of Remote Control Desk & Instrument panel for the motor control, Power Distribution & other system as per specification and Technical offer
163Supply, delivery at site and storage of Control Panel for Ventilation system
164Supply, delivery at site and storage of pressure transmitter and level indicator complete with fitting and fixture as per specification and Technical offer & as follows.
165From M.V. Panel cum MCC to respective Motor Terminals, 1.1 KV(E) grade 3C 240 sq mm Al. conductor, XLPE insulated armoured cable, complete for all the motors.( 2 runs for each motor)
166From PDB to 2 Nos. LDB’s at pump House, 1.1 KV 4C, 6 sq mm Multi strand Copper conductor XLPE insulated armoured cable
167From PDB to all Valve Actuators, 1.1 KV, 4C, 2.5 sq mm Multi strand copper conductor XLPE insulated armoured cable
168From PDB to all motor Space Heaters, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable
169From PDB to E.O.T. Crane, 1.1 KV 4C,6 sq mm Multi strand Copper conductor XLPE insulated armoured cable
170From PDB to Control Desk, 1.1 KV, 3C, 2.5 sq mm Multi strand copper conductor XLPE insulated armoured cable for AC supply
171From PDB to H.T. PDB cum MCC, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable
172From PDB to Control Panel for Ventilation System, 1.1 KV 4C,6 sq mm Multi strand Copper conductor XLPE insulated armoured cable
173From PDB to Pressure Transmitter & Flow Transmitter / Indicator, 650 / 1100 V 4C0.75 sq mm Screen Cable
174From Control Desk to each Motor RTD / BTD Terminal Box, 650 / 1100V grade 10 Triad X 1.5mm PVC insulated stranded copper screened armoured cable, complete for all the motors
175Control Cable for AC & DC supply of stranded copper conductor of various sizes & grade and of suitable length as per specification for all remote control and interlocking circuits
176Supply, delivery at site and storage of Jointing materials as per specification & as follows
177All H.T. Cable jointing materials ( dry type )
178All M.V. Cable jointing materials ( dry type)
179All Control & Screen Cable jointing materials ( dry type)
180N.B. – No extra payment would be made if the length and dia. & variety of the different sizes of cable varies on the higher side to meet the requirement of the specification and site condition. Rates must be quoted carefully. This is also applicable for all type of cable joints.
181Supply, delivery at site and storage of materials for Earthing system as per current I.E. Rule & specification for all equipment
182Supply, delivery at site and storage of Lightning Arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rule
183Supply, delivery at site & storage of fire extinguishers andfire buckets as follows:
184Dry Powder ( 5Kg. each )
185ABC Type ( 5 Kg. each )
186ABC Type ( 2 Kg. each ) portable
187Fire Bucket ( 9 Litres )
188Supply, delivery at site and storage of Ventilation System comprising of fresh air supply fans, Air Duct & Exhaust fans complete with cowl etc. at the pump house all complete as per specification.
189Supply, delivery at site and storage of M.S. Structural materials for cable tray / rack, panel installation supports, Pipes & valves supports, fabricated stairs & all other fabrication work.
190Supply, delivery at site and storage of all luminaries, fittings, fixtures complete with necessary cables with wires and all other accessories for inside lighting of pump house including Lighting Distribution Boards as per specification.
191Supply, delivery at site and storage of Misc. Item such as rubber mats, Shock Treatment Chart ,Safety Signage, Glow Sign Board etc. as per specification
192Supply, delivery at site and storage of 5.0 T capacity E.O.T. Crane with 1 T capacity auxiliary hoist suitable for inching operation with other allied equipment all complete as per specification
193Supply and delivery at site and storage of spare parts as per specification
194PART – B ( INSTALLATION PART )
195Installation at site of vertical turbine pumps with column assembly, discharge head, sole plate, motor stool and all other accessories all complete of suitable capacity and 60 Mtrs. TDH as per specification and Technical offer. Maximum allowable speed of pump shall be 1500 R.P.M.
196Installation at site of MS pipes, specials, joints, flanges & common delivery manifold with extended pipe line as per specification and Technical offer.
197Installation at site of valves complete with fixture as per specification and Technical offer & as follows.
198Butterfly valve for delivery side of pumps fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line
199Non-Return Valve for individual pump delivery pipe line
200Butterfly valve fitted withelectrical actuator suitable forlocal and control desk operation and display system for common delivery manifold
201Double throat air valve with Isolating Valve at common delivery manifold as per specification
202Installation at site of M.S. dismantling joint assembly forcommon delivery manifold as per specification and Technical offer
203Installation at site of M.S. dismantling joint assembly for the individual pump delivery pipe line as per specification and Technical offer.
204Installation at site of M.S. puddle collar / plate for common delivery manifold as per specification.
205Installation at site of Full bore electromagnetic type Flow meter, Recorder, Totaliser as per specification and Technical offer.
206Installation at site of Pressure gauges complete with fittings and fixture as per specification and Technical offer & as follows.
207Pressure gauge for Delivery side (0– 10 Kg / cm2)
208Pressure gauge for common delivery manifold(0 – 10 Kg / cm2 )
209Installation at site of pressure transmitter and level indicator complete with fitting and fixture as per specification and Technical offer & as follows.
210Pressure transmitter for delivery side ( 0 – 10 Kg / cm2 )
211Pressure transmitter for common delivery manifold( 0 – 10 Kg / cm2 )
212Radar type Level Monitoring system for CWR / Sump Water Level complete with all accessories
213Installation at site ofVerticalsquirrel-cage TEFC / CACA motor rated at 415 V ±10%, 50Hz ±5%, 3Ph, 1500 R.P.M.(syn.) of adequate capacity to match the pump at sl. no. 1) complete with coupling hub and all other accessories as per specification & Technical offer ( Rating not less than 200 KV )
214Installation at site of M.V. Panel of 1600A capacity at Pump House, suitable for operation at 415 Volts, ±10%, 3 Phase, 50 Hz, ±5% AC system as per specification
215Installation at site of Remote Control Desk & Instrument panel for the motor control, Power Distribution & other system as per specification and Technical offer
216Installation at site of Control Panel for Ventilation system
217Installation at site of M.V. and Control Cable as per specification & as follows :
218From M.V. Panel cum MCC to respective Motor Terminals, 1.1 KV(E) grade 3C 240 sq mm Al. conductor, XLPE insulated armoured cable, complete for all the motors.( 2 runs for each motor)
219From PDB to 2 Nos. LDB’s at pump House, 1.1 KV 4C, 6 sq mm Multi strand Copper conductor XLPE insulated armoured cable
220From PDB to all Valve Actuators, 1.1 KV, 4C, 2.5 sq mm Multi strand copper conductor XLPE insulated armoured cable
221From PDB to all motor Space Heaters, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable
222From PDB to E.O.T. Crane, 1.1 KV 4C,6 sq mm Multi strand Copper conductor XLPE insulated armoured cable
223From PDB to Control Desk, 1.1 KV, 3C, 2.5 sq mm Multi strand copper conductor XLPE insulated armoured cable for AC supply
224From PDB to H.T. PDB cum MCC, 1.1 KV 3C, 2.5 sq mm Multi strand Copper conductor XLPE insulated armoured cable
225From PDB to Control Panel for Ventilation System, 1.1 KV 4C,6 sq mm Multi strand Copper conductor XLPE insulated armoured cable
226From PDB to Pressure Transmitter & Flow Transmitter / Indicator, 650 / 1100 V 4C0.75 sq mm Screen Cable
227From Control Desk to each Motor RTD / BTD Terminal Box, 650 / 1100V grade 10 Triad X 1.5mm PVC insulated stranded copper screened armoured cable, complete for all the motors
228Control Cable for AC & DC supply of stranded copper conductor of various sizes & grade and of suitable length as per specification for all remote control and interlocking circuits
229Installation at site of Jointing materials as per specification & as follows
230All H.T. Cable jointing materials ( dry type )
231All M.V. Cable jointing materials ( dry type)
232All Control & Screen Cable jointing materials ( dry type)
233N.B. – No extra payment would be made if the length and dia. & variety of the different sizes of cable varies on the higher side to meet the requirement of the specification and site condition. Rates must be quoted carefully. This is also applicable for all type of cable joints.
234Installation at site of materials for Earthing system as per current I.E. Rule & specification for all equipment
235Installation at site of Lightning Arrestor along with earth strip and earth electrodes all complete as per specification and all other equipment required to comply with latest I.E. Rule
236Installation at site of fire extinguishers andfire buckets as follows:
237Dry Powder ( 5Kg. each )
238ABC Type ( 5 Kg. each )
239ABC Type ( 2 Kg. each ) portable
240Fire Bucket ( 9 Litres )
241Installation at site of Ventilation System comprising of fresh air supply fans, Air Duct & Exhaust fans complete with cowl etc. at the pump house all complete as per specification.
242Installation at site of M.S. Structural materials for cable tray / rack, panel installation supports, Pipes & valves supports, fabricated stairs & all other fabrication work.
243Installation at site of all luminaries, fittings, fixtures complete with necessary cables with wires and all other accessories for inside lighting of pump house including Lighting Distribution Boards as per specification.
244Installation at site of Misc. Item such as rubber mats, Shock Treatment Chart ,Safety Signage, Glow Sign Board etc. as per specification
245Installation at site of 5.0 T capacity E.O.T. Crane with 1 T capacity auxiliary hoist suitable for inching operation with other allied equipment all complete as per specification
246Painting the whole installation as per specification & direction of E.I.C.
247Carrying out pre-commissioning test onM.V equipments and making ready allM.V. equipment for High/Medium pressure tests and submission of test reports
248Testing of the whole installation & submission of test reports as per specification & direction of EIC
249Charges for Diesel Generator set/Temporary power connection from CESC for construction purpose.
250Supplyof drawings for approval and finally as-built drawings in 6 sets and CDs .
251Supply, delivery at site & laying of MS pipe including fabrication of all necessary accessories special ,enlarger, ,R.C.C./ fabricated pedestal ,thrust blocks , etc including cutting pipes, making flanged & welded joints as required, for joiningthe common deliverymanifolds with the existingprelaid rising main pipescomplete as per technical specification and direction of EIC. Note : Any mechanical or electrical or civil , parts/spare/equipment not included in the BOQ but required to complete the project is to be supplied by the agency at free of cost .
252Trial run3 months and commissioning of the entire installation as per specification and direction of EIC.
253O&M OF THE WTP, CWPS & PLANT SUB STATION FOR 60 MONTHS AFTER SUCCESSFUL COMPLETION OF TRIAL RUN OF THREE MONTHS AFTER THE CERTIFIED DATE OF COMMISSIONING OF THE ENTIRE PLANT (3 MONTHS TRIAL RUN + 60 MONTHS OPERATION MAINTENANCE)TOTAL 63 MONTHS WITH TRAINED STAFF, SUPPLY OF COAGULANTS, DISINFECTANT AND LABORATORY REAGENTS TO RUN THE PLANT TO ITS DESIRED CAPACITY
254Civil Works
255Electro- Mechanical Works
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail