Work Of Purchasing Furniture In Bida Office As Per Tender Document , Supply, Fitting & Installation Of Steel Almirah With Fully Powder Coated With Fine Finish Having No. Of 2 Doors Hinged Type With Four Adjustable Shelvescrca Sheets Of Standard Brand An, bhiwadi-Rajasthan

Work Of Purchasing Furniture In Bida Office As Per Tender Document , Supply, Fitting & Installation Of Steel Almirah With Fully Powder Coated With Fine Finish Having No. Of 2 Doors Hinged Type With Four Adjustable Shelvescrca Sheets Of Standard Brand And Color Upto Satisfaction Of Engineer-Incharge. I ) The Almirah Should Be Made Of Prime Quality Deoxidized Crca Steel-Panels 0.6 Mm Thick & Front Frame Shelf 0.8 Mm Thick All Steel Body Must Be Epoxy Powder Coated To The Thickness Of 50 Microus. Ii ) 7 Leaver Locking Arrangement With Nickel Finished Die Cast Handle, There Must Be A Glide Screw For Levelling Purpose. ( Minor Deviation In Dimension ±5% Is Negotiable ) , Size: 1830 Mm ( H ) X 900 Mm ( W ) X450 Mm ( D ) . , Size: 1200 Mm ( H ) X 900 Mm ( W ) X450 Mm ( D ) . , Glass Table Top 8Mm Thick With Edges Chamfered As Per Design. , Office Rack ( Open ) With Six Shelves With Five Compratment Of 20Gauge Size 78X45X15 Supply, Fitting & Installation Of Steel Rack I ) Open Rack ( Medium Duty ) 6 Shelves: Size: 6.0Ft. X 3Ft. X 15Inches. Ii ) Made Of Prime Quality Steel Confirming To Is: 5986 / 513 D. Should Ensure Even Thickness Of Material And Thus Superior Load Carrying Capability. Iii ) Should Be Designed In Accordance With Is: 800 & 801 Standards. Iv ) Allcomponentsshouldbesubjectedtoafivezone, 8-Stagespecialpretreatmentprocessandfinishedusingsuperiorpowdercoatingtechnologytogivelong Lasting Finish And Anti-Corrosion Properties. Medium Duty Panel Capacity ( Udl ) : 60 Kg ( Minor Deviation In Dimension ±5% Is Negotiable ) , Providing, Fitting & Installation Office Table Of Overall Size 1800 ( W ) X 900 ( D ) X 750 ( H ) Mm: Table Top: 25Mm Thick Prelaminated Mdf Board Of Well Known Good Quality Mdf Supplier Like Action Tesa, Greemlam, Merino With Edges Coverd By 2Mm Thick Pvc Rehau Make Edge Bending Pasted Byhot Pressed Method By Pvc Edge Bending Machine With Jowatbrand Glue.Gable Ends And Modesty Panel Made Up Of18mm Thickprelaminated Mdf Board Of Well Known Good Quality Mdf Supplier Like Action Tesa, Greemlam, Merino With Edges Coverd With 0.8Mm Thick Pvc Rehau Make Edge Bending Paste Byhot Pressed Method By Pvc Edge Bending Machine With Jowatbrand Glue With 3 Drawer Pedestal Size :- 400X450x725mm ( 2 Drawer 1 Filing Drawer ) In Prelaminated Mdf Boardprelaminated Mdf Board Of Well Known Good Quality Mdf Supplier Like Action Tesa, Greemlam, Merino With Edges Coverd By .8Mm Thick Pvc Rehau Make Edge Bending Pasted Byhot Pressed Method By Pvc Edge Bending Machine With Jowatbrand Glue. With Central Multi Drawer Loking System Along With Coasters Having Manual Locking System And Ss Finish Handles On Drawer Facia.All The Parts Oftable Arejoined By Minifix Houzing And Wooden Dowel. , Providing, Fitting & Installation Table Size-1200 ( W ) X600 ( D ) X750 ( H ) : Table Top: 25Mm Thick Prelaminated Mdf Board Of Well Known Good Quality Mdf Supplier Like Action Tesa, Greemlam, Merino With Edges Coverd By 2Mm Thick Pvc Rehau Make Edge Bending Pasted Byhot Pressed Method By Pvc Edge Bending Machine With Jowatbrand Glue.Gable Ends And Modesty Panel Made Up Of18mm Thickprelaminated Mdf Board Of Well Known Good Quality Mdf Supplier Like Action Tesa, Greemlam, Merino Providing & Fixing With Edges Coverd With 0.8Mm Thick Pvc Rehau Make Edge Bending Paste Byhot Pressed Method By Pvc Edge Bending Machine With Jowatbrand Glue.With Drawers Size:- ( 400Wx450dx690h ) -3 Drawer ( 2 Drawer +1 Filing ) Are Placed At The Bottom Of The Table Top - All Structure Made By 18Mm Thick Prelaminated Mdf Board Bsl / Bsl Which Is Edge Bended By Pvc Edge Bending Rehau Make With Hot Melt And The Drawer Slides On Telescopic Chanel 450Mm Length Which Is Well Known Brand Hettich / Adolf / Kaff. All Three Drawer Lockable By Single Lock .Having Provision For Handle-In-Ss Finish. , Providing, Fitting & Installation Executive High Back Chair: Providing And Placing Of Revolving Type Chair Shall Be Made Up Of 12Mm Thick Hot Pressed Plywood . The Back Is Made Of Twin Layered Ply Or Double Layered Ply 12Mm Thickjoint Together To Give Better Support To The Back And Enhance The Looks.The Chair Backrest Is Made Of Injection Moulded Polypropelene Upholstered With Mesh Fabric.Seat Width Is 500Mm And Depth Is Also 480Mm. Seat Height Should Be 450 Mm.Seat Of The Chair To Be Made With 45 Density Pu Foam Of 60 Mm Thickness.The Chair Has Tilting Mechanism For Seat And Back. The Chair Should Have Steel Base With Nylon Castors For Smooth Movement. The Chair Will Have Polyurethan Armrest. Model : As Shown In Figures Or Equivalent Or As Directed By Engineer-Incharge. , Providing, Fitting & Installation Executive Mid Back Chair: Providing And Placing Of Revolving Type Chair Shall Be Made Up Of 12Mm Thick Hot Pressed Plywood . The Back Is Made Of Twin Layered Ply Or Double Layered Ply 12Mm Thickjoint Together To Give Better Support To The Back And Enhance The Looks.The Chair Backrest Is Made Of Injection Moulded Polypropelene Upholstered With Mesh Fabric.Seat Width Is 500Mm And Depth Is Also 480Mm. Seat Height Should Be 450 Mm.Seat Of The Chair To Be Made With 45 Density Pu Foam Of 60 Mm Thickness.The Chair Has Tilting Mechanism For Seat And Back. The Chair Should Have Steel Base With Nylon Castors For Smooth Movement. The Chair Will Have Polyurethan Armrest.Model As Shown In Figure Or Equivalent As Per Satisfaction Of Engineer-Incharge. , Providing, Fitting & Installation Pvc Moulded Chair: Providing And Placing Of Pvc Moulded Chair Chair With Cushions At Seat And Back. Chair Height Is 815 Mm Width Is 560Mm And Depth Is 560 Mm. Cushions Are To Be Fixed At Seat And Back. Modle : As Shown In Figures And As Per Satisfaction Of Engineer-Incharge. , Computer Table Supplying, Fitting & Installation Of Computer Table / Desk I ) Primary Material: Medium Density Fiberboard ( Mdf ) &Pre Laminated Particle Board ( Plb ) Knock Down, Free Assembly Ii ) Durable Finish: Mdf Top With Pvc Lamination Iii ) Sturdy Particle Board & Mdf Construct:Particle Board Panel And Medium Density Fiber On Top With Cpu Compartment And Built-In Keyboard Tray ( Interchangeableprinter Rack Will Be Preferred ) Iv ) 04 Nos. Of Twin Castor Wheels With Locking System ( Castor Wheel Dia. 50 Mm ) Are To Be Injection Moulded V ) Standard Product Warranty ( Minor Deviation In Dimension ±5% Is Negotiable ) , Dimensions 800 Mm ( W ) X 734 Mm ( H ) X 450 Mm ( D ) , Dimensions 1200 Mm ( W ) X 750 Mm ( H ) X 600 Mm ( D ) , Computer Chair Supplying, Fitting & Installation Of Computer Chair ( Mid Back Revolving Chair ) I ) Dimensions 700 Mm ( W ) X 1055 Mm ( H ) X 700 Mm ( D ) Ii ) Primary Material: Mild Steel / Knock Down, Free Assembly Iii ) Design :The Ergonomically Design To Provide Lumbar Support For Long Hours Of Seating And Has A Five-Pronged Strong Metal Base With Wheels Iv ) Fabric Base: Complementing The Base Is The Seat With High Quality Fabric Upholstery, Permanent Contact Tilt Mechanism, Upright Position Locking And A Fixed Loop Armrest. V ) Metal Base: It Should Have A Five-Pronged Strong Metal Base With Wheels For Durability Stability Vi ) The Centre Pivot Mechanism Is To Be Designed With The Following Features: 3600 Revolving Type. 17°Maximum Tilt On Pivot At Centre. Tilt Tension Adjustment. Upright Locking. Vii ) 05 Nos. Of Twin Castors Wheel With Locking System ( Castor Wheel Dia. 50 Mm. ) Are To Be Injection Moulded Viii ) Standard Product Warranty ( Minor Deviation In Dimension ±5% Is Negotiable ) , Three Seater Lobby Chair ( For Waiting Area / Visitor Reception ) Supplying, Fitting & Installation Of Three Seater Lobby Chair ( For Waiting Area / Visitor Reception ) I ) 3 Perforated Seats With A Leatherette Cushion Ii ) Dimension: 1780 Mm ( W ) X 790 Mm ( H ) X 624Mm ( D ) Iii ) Primary Material: Stainless Steel ( Surface: Powder Coated ) , Frame Material Subtype Cast Iron, Upholstery Material: Leatherette Iv ) Knock Downwith Rounded Arm Restsmade Of Stainless Steel, Powder Coated Steel Seat, Chrome Plated Handles And Legs, Ms Beam In Black Colour. Free Assembly V ) Design :The Ergonomically Design To Provide Lumbar Support ( Seat Radian 17.45 Degrees To Make The Seating Comfortable ) Vi ) Weight Handling Capacity: 325-350 Kg ( Minor Deviation In Dimension ±2.5 % Is Negotiable ) , Supply, Fitting & Installation Of Central Table / Coffee Table Of Any Company Brand Size 1200Mmx600mmx380mm Work Surface 10Mm To 12Mm Thock With Glass Top And Under Surface Of The Table Should Be Of Premium Quality Teak Wood With Natural Finish With Melamine Polish. , Supply, Fitting & Installation Of Sofa And Sofa Structure Should Be Made Of Tropical Wood. The Seat Of Sofa Shall Include Double Webbing With Slab Stack Foam Of Recognized Brand. The Back Of The Sofa Shall Be Made Of Slab Stack Foam Of Recognized Brand. Sofa Should Have S Spring And Nylon Webbing At The Seat And Nylon Web At Back. The Upholstery Of The Sofa Should Be Made Of High Quality Rexine.Pvc Legs Of Size 3 To Be Placed At The Bottom. The Sofa Seat Dimesnsion For , 3 Seater Sofa Should Be 63X26 And With Overall Size Of The Sofa 3 Seater Is 75X34X30 , 2 Seater Sofa Should Be 42X26 And With Overall Size Of The Sofa 2 Seater Is 54X34X30. , Supply, Fitting & Installation Of Tile Optimizer ( Twin Mobile Drive Type Cover Unit With High Density Storage System Of Godrej Or Equivalent Brand3 Bay ( Single Static 1 No, Twin Mobile 3 Nos, Single Last 1 Nos ) With All Accesories Per Drive ) . Overral Size :457 Mm ( D ) X 915Mm ( W ) X 1980Mm ( H ) For Each Body The Storages Should Be Fixed Or Movable Bolted To Undercarriage Which Should Roll Onto The Channels Which Should Be Firmly Embedded To The Ground. Configurations Should Have Following Type Of Blocks – 1. Single Static ( Ss ) 2. Single Last ( Sl ) 3. Twin Mobile ( Tm ) - 2 Body Back To Back Main Body: ( A ) Construction Should Be Rigid Knock Down Construction Made Out Of 0.8 Thick Cold Rolled Closed Annealed Steel Conforming To Is: 513 Grade D. Each Body Block ( Ss / Sl / Tm ) Building Should Consist Of 1 Main Unit & 1Add-On Unit . Each Unit Must Have 5 Loading Levels Formed By 4 Nos. Adjustable Shelves. Overall Height Should Be 2080 Mm From Ground ( 1980 Body + 65 Undercarriage + 35 Channel System ) . The Finish Of The Bodies Including Shelves Should Be Given Antirust Surface Treatment & Should Be Powder Coated With Epoxy Polyester Powder. There Should Be 4 Adjustable Shelves Per Body Giving 5 Loading Levels. The Undercarriage Should Be A Welded Frame Made Of High Resistance Sheet 3.15 Mm Thk Conforming To Is:10748 Suitably Fabricated To Take The Loads Based On Configuration.The Mechanism Can Be Push Pull Type Or Drive Type

INR 590 /-

INR 30000.0 /-

INR 15 Lakhs /-

Name of Work: chMk dk;kZy; esa QfuZpj Ø; djus dk dk;ZA

Sl. No.	Item Description
1	Supply, fitting & installation of Steel Almirah with fully powder coated with fine finish having no. of 2 doors hinged type with four adjustable shelvesCRCA sheets of standard brand and color upto satisfaction of Engineer-Incharge. i) The Almirah should be made of prime quality deoxidized CRCA steel-panels 0.6 mm thick & front frame shelf 0.8 mm thick all steel body must be epoxy powder coated to the thickness of 50 microus. ii) 7 leaver locking arrangement with nickel finished die cast handle, there must be a glide screw for levelling purpose. (minor deviation in dimension ±5% is negotiable)
2	Size: 1830 mm (h) x 900 mm (w) x450 mm (d).
3	Size: 1200 mm (h) x 900 mm (w) x450 mm (d).
4	Glass Table Top 8mm thick with edges chamfered as per design.
5	Office Rack (open) with six Shelves with five compratment of 20gauge size 78"x45"x15" Supply, fitting & installation of Steel Rack i) Open rack (Medium duty) 6 shelves: Size: 6.0ft. X 3ft. X 15inches. ii) Made of prime quality steel confirming to IS: 5986 / 513 D. Should ensure even thickness of material and thus superior load carrying capability. iii) Should be designed in accordance with IS: 800 & 801 standards. iv) AllcomponentsshouldbesubjectedtoaFiveZone,8-stagespecialpretreatmentprocessandfinishedusingsuperiorpowdercoatingtechnologytogivelong lasting finish and anti-corrosion properties. Medium duty panel capacity (UDL): 60 kg (minor deviation in dimension ±5% is negotiable)
6	Providing, fitting & installation Office table of overall size 1800(w) x 900(d) x 750(h) mm: Table top: 25mm thick prelaminated mdf board of well known good quality MDF supplier like Action Tesa,Greemlam, Merino with edges coverd by 2mm thick PVC Rehau make edge bending pasted byhot pressed method by pvc edge bending machine with Jowatbrand glue.Gable ends and modesty panel made up of18mm thickprelaminated mdf board of well known good quality MDF supplier like Action Tesa,Greemlam, Merino with edges coverd with 0.8mm thick PVC Rehau make edge bending paste byhot pressed method by pvc edge bending machine with Jowatbrand glue with 3 Drawer pedestal size :- 400x450x725mm (2 drawer 1 filing drawer) in prelaminated mdf boardprelaminated mdf board of well known good quality MDF supplier like Action Tesa,Greemlam, Merino with edges coverd by .8mm thick PVC Rehau make edge bending pasted byhot pressed method by pvc edge bending machine with Jowatbrand glue. with central multi drawer loking system along with coasters having manual locking system and SS finish handles on drawer facia.All the parts oftable arejoined by minifix houzing and wooden dowel.
7	Providing, fitting & installation Table Size-1200(W)X600(D)X750(H): Table top: 25mm thick prelaminated mdf board of well known good quality MDF supplier like Action Tesa,Greemlam, Merino with edges coverd by 2mm thick PVC Rehau make edge bending pasted byhot pressed method by pvc edge bending machine with Jowatbrand glue.Gable ends and modesty panel made up of18mm thickprelaminated mdf board of well known good quality MDF supplier like Action Tesa, Greemlam, Merino Providing & fixing with edges coverd with 0.8mm thick PVC Rehau make edge bending paste byhot pressed method by pvc edge bending machine with Jowatbrand glue.With Drawers size:- (400wx450dx690h)-3 drawer (2 Drawer +1 filing) are placed at the bottom of the table top - All structure made by 18mm thick prelaminated mdf board BSL/BSL which is edge bended by pvc edge bending Rehau make with hot melt and the drawer slides on telescopic chanel 450mm length which is well known brand Hettich/Adolf /Kaff. All three drawer lockable by single lock .Having provision for handle-in-ss finish.
8	Providing, fitting & installation Executive High Back chair: Providing and placing of Revolving type Chair shall be made up of 12mm thick hot pressed plywood . The back is made of twin layered ply or double layered ply 12mm thickjoint together to give better support to the back and enhance the looks.The chair backrest is made of injection moulded polypropelene upholstered with mesh fabric.Seat width is 500mm and depth is also 480mm. Seat height should be 450 mm.Seat of the chair to be made with 45 density PU foam of 60 mm thickness.The chair has tilting mechanism for seat and back. The chair should have Steel base with nylon castors for smooth movement. The chair will have Polyurethan armrest. Model : As shown in figures or equivalent or as directed by Engineer-Incharge.
9	Providing, fitting & installation Executive Mid Back chair: Providing and placing of Revolving type Chair shall be made up of 12mm thick hot pressed plywood . The back is made of twin layered ply or double layered ply 12mm thickjoint together to give better support to the back and enhance the looks.The chair backrest is made of injection moulded polypropelene upholstered with mesh fabric.Seat width is 500mm and depth is also 480mm. Seat height should be 450 mm.Seat of the chair to be made with 45 density PU foam of 60 mm thickness.The chair has tilting mechanism for seat and back. The chair should have Steel base with nylon castors for smooth movement. The chair will have Polyurethan armrest.Model as shown in figure or Equivalent as per satisfaction of Engineer-Incharge.
10	Providing, fitting & installation PVC Moulded chair: Providing and placing of PVC Moulded chair Chair with cushions at seat and back. Chair Height is 815 mm width is 560mm and depth is 560 mm. Cushions are to be fixed at seat and back. Modle : As shown in Figures and as per satisfaction of Engineer-Incharge.
11	Computer Table Supplying, fitting & installation of Computer Table/ Desk i) Primary Material: Medium Density Fiberboard (MDF)&Pre Laminated Particle Board (PLB) Knock Down, Free Assembly ii) Durable Finish: MDF top with PVC lamination iii) Sturdy Particle Board & MDF Construct:Particle board panel and medium density fiber on top with CPU Compartment and Built-in Keyboard Tray(interchangeablePrinter rack will be preferred) iv) 04 nos. of twin castor wheels with locking system (castor wheel dia. 50 mm) are to be injection moulded v) Standard Product Warranty (minor deviation in dimension ±5% is negotiable)
12	Dimensions 800 mm (W) x 734 mm (H) x 450 mm (D)
13	Dimensions 1200 mm (W) x 750 mm (H) x 600 mm (D)
14	Computer Chair Supplying, fitting & installation of Computer Chair (Mid back revolving chair) i) Dimensions 700 mm (W) x 1055 mm (H) x 700 mm (D) ii) Primary Material: Mild Steel/Knock Down, Free Assembly iii) Design :The ergonomically design to provide lumbar support for long hours of seating and has a five-pronged strong metal base with wheels iv) Fabric Base: Complementing the base is the seat with high quality fabric upholstery, permanent contact tilt mechanism, upright position locking and a fixed loop armrest. v) Metal Base: It should have a five-pronged strong metal base with wheels for durability stability vi) The centre pivot mechanism is to be designed with the following features: 3600 revolving type. 17°maximum tilt on pivot at centre. Tilt tension adjustment. Upright locking. vii) 05 nos. of twin castors wheel with locking system (castor wheel dia. 50 mm.) are to be injection moulded viii) Standard Product Warranty (minor deviation in dimension ±5% is negotiable)
15	Three Seater Lobby Chair(for Waiting Area/ Visitor Reception) Supplying, fitting & installation of Three Seater Lobby Chair (for Waiting Area/ Visitor Reception) i) 3 perforated seats with a leatherette cushion ii) Dimension: 1780 mm (W) x 790 mm (H) x 624mm (D) iii) Primary Material: Stainless Steel (Surface: Powder coated), Frame Material Subtype Cast Iron, Upholstery Material: Leatherette iv) Knock Downwith rounded arm restsmade of Stainless steel, Powder Coated Steel Seat, Chrome plated handles and legs, MS Beam in Black Colour. Free Assembly v) Design :The ergonomically design to provide lumbar support (Seat Radian 17.45 degrees To make the Seating comfortable) vi) Weight handling capacity: 325-350 kg (minor deviation in dimension ±2.5 % is negotiable)
16	Supply, fitting & installation of Central table/coffee table of any company brand size 1200mmx600mmx380mm work surface 10mm to 12mm thock with glass top and under surface of the table should be of premium quality teak wood with natural finish with melamine polish.
17	Supply, fitting & installation of sofa and sofa structure should be made of tropical wood. The seat of sofa shall include double webbing with slab stack foam of recognized brand. The back of the sofa shall be made of slab stack foam of recognized brand. Sofa should have S Spring and nylon webbing at the seat and nylon web at back. The upholstery of the sofa should be made of high quality rexine.PVC legs of size 3" to be placed at the bottom. The sofa seat dimesnsion for
18	3 seater sofa should be 63"x26" and with overall size of the sofa 3 seater is 75"x34"x30"
19	2 seater sofa should be 42"x26" and with overall size of the sofa 2 seater is 54"x34"x30".
20	Supply, fitting & installation of Tile optimizer (Twin mobile drive type cover unit with high density storage system of Godrej or equivalent brand3 bay (single static 1 no, twin mobile 3 nos, single last 1 nos) with all accesories per drive). Overral size :457 mm(D) x 915mm(W) x 1980mm(H) for Each Body The storages should be fixed or movable bolted to undercarriage which should roll onto the channels which should be firmly embedded to the ground. Configurations should have following type of blocks – 1. Single Static (SS) 2. Single Last (SL) 3. Twin Mobile(TM) - 2 body back to back Main Body: (a) Construction should be Rigid Knock Down construction made out of 0.8 thick cold rolled closed annealed Steel conforming to IS: 513 Grade D. Each body block (SS/SL/TM) building should consist of 1 Main unit & 1Add-on unit . Each unit must have 5 loading levels formed by 4 nos. adjustable shelves. Overall Height should be 2080 mm from ground (1980 body + 65 undercarriage + 35 channel system). The finish of The bodies including shelves should be given antirust surface treatment & should be powder coated with epoxy polyester powder. There should be 4 adjustable shelves per body giving 5 loading levels. The Undercarriage should be a welded frame made of High Resistance sheet 3.15 mm thk conforming to IS:10748 suitably fabricated to take the loads based on configuration.The mechanism can be Push Pull type or Drive Type