Military Engineer Services-MES has published Repair / Replacement Of Joinery, Tiling, Flooring, Plastering, Repair / Replacement Of Joinery, Tiling, Flooring, Plastering, Plumbing, And Boundary Wall Drain, Fencing. Submission Date for this Tender is 10-10-2022. Drainage Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Sep-2022 | Corrigendum to Dates | Date | 03-10-2022 |
| 2 | 23-Sep-2022 | Corrigendum to BOQ | BOQ | 03-10-2022 |
| 3 | 03-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-10-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all of quoins, arches, pillars etc but excluding ashlar facings and precast concrete articlescomplete all as specified and directed. |
| 2 | M&L for old size brick work with fly ask bricks,staright or curved on plan exc 6m mean radius in CM 1:6 etc all as specified and directed. |
| 3 | Description of item as above but Except brick workbuilt in CM (1:4) complete. |
| 4 | Demolition of cement concrete (unreinforced) as in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in flooring etc complete all as specified & directed. |
| 6 | M&L for 50 mm thick PCC (1:3:6) type C-2 using 40mmgraded stone aggregate as in floor finishelaid in alternate panels, finished even and smooth without using extra cementcomplete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, all as specified and directed |
| 8 | M&L for non skid ceramic tiles (Coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. Make : Somany/Johnson/Kajariya/Sunheart |
| 9 | All as per above item above buton vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed. Make : Somany/Johnson/Kajariya/Sunheart |
| 10 | M&L for non skid ceramictiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. Make : Somany/Johnson/Kajariya/Sunheart |
| 11 | M&L for non skid ceramictiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. Make : Somany/Johnson/Kajariya/Sunheart |
| 12 | M&L for glazed ceramic tiles (coloured) 450x350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick renderingin cement & sand mortar 1:4, complete all as specified and as directed.Make : Somany/Johnson/Kajariya/Sunheart |
| 13 | Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.. |
| 14 | M&L for 15mm thick renderingin cement mortar (1:4)on brick work or concrete surfaces, finished even and smooth without using extra cementcomplete all as specified and directed. |
| 15 | M&L for 10mm thick rendering in CM 1:6on brick or concrete surfaces on wall and finished surface even and smooth witout using extra cement all as specified and directed |
| 16 | M&L for 5 mm thick rendering on fair faces of brick work or concrete surfaces on ceiling with CM 1:4 etc complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade overa coat ofprimer complete all as specicified. |
| 18 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified. |
| 19 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash,complete,all as specified. |
| 20 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash,complete,all as specified & as directed. |
| 21 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling,complete,all as specified &directed. |
| 22 | M&L forpreparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and as directed. |
| 23 | M&L complete removal of existing treatment and applying two coats oil emulsion distemper on putty prepared surfaces / old decorated surfaces as specified and directed. |
| 24 | M&L complete removal of existing treatment including cleaning of motar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of cement base paint of approved shade/tint with alkali fungal & resistant primer over a coat of 1 mm thick wall care putty on walls etc complete all as specified and directed. |
| 25 | M&L for 1mm thick of wall care putty over wall/ceiling surfaces etc allas specified and directed. |
| 26 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed. |
| 27 | Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame)/ventilator including irom mongrey andcutting holes for hold fasts & making good complete all as specified & directed. |
| 28 | Taking down shutters of any description exceeding 1 sqm and n.exceeding 2 sqm each and complete all as specified and directed. |
| 29 | M&L for taking down and refixing in same opening shutter exceeding 1 sqm but not exceeding 2.00 sqm including easingadjusting and refixing with same hardwarecomplete all as specified and directed . |
| 30 | S&F pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete as specified and directed by Engineer-in-Charge. |
| 31 | S&F pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete as specified and directed by Engineer-in-Charge. |
| 32 | M&L Cement Concrete 1:3:6 (12.5mm graded aggregate) in filling to hollow sections of pressed steel door frame etc., complete all as specified and as directed. |
| 33 | M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreatedcomplete all as specified. |
| 34 | S&F, 35mm thick factory made second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed. |
| 35 | S&F coloured powder coated aluminium strip of size not less than 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed. |
| 36 | S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet. (Make : Rajshree) |
| 37 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.Sframe welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing. (Make : Rajshree) |
| 38 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified. |
| 39 | S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified. |
| 40 | S&F 125 mm size aluminium alloy handles, fabricated type,extruded section etc completedall as specified and directed. |
| 41 | S&F 150mm longaluminium anodised barrel tower boltsof extruded section completed all as specified and directed. |
| 42 | S&F in repair 150 mm length door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc all as specified and directed. |
| 43 | S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 44 | S & F colour powder coated aluminium frame and shutters for door windows ventilators with one or more rebates or aluminium section of two or more traccks incase sliding windows including jointing cleat for fixing (minimum thickness of powder coating shall be 50 micron) complete all as specified and directed. |
| 45 | S&F aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 800mm incl fixing with aluminium hannel 1mm thick with steel screw and tint match with existing complete all as specified and as directed |
| 46 | S&F for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 47 | S&F for 4.0 mm thick sheet figured glass pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 48 | S&F stainless steel wire cloth 0.63 mm nominal dia of wire and averagewidth of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, all as directed. |
| 49 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed |
| 50 | M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified. |
| 51 | Taking down 15mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and as directed. |
| 52 | Taking down 20mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and as directed. |
| 53 | Cutting chases, pining in, making good to facing where required and pointing in CM 1:3 for concealed water tubingmaking good, cutting exc 10cm but n.exc 20cm girth in brick walls all as specified. |
| 54 | S&F of 15 mm bore steeltubeing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc all as specified and directed. |
| 55 | S&F of 20 mm bore steeltubeing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc all as specified and directed. |
| 56 | Dismantling of cast iron orreinforced concrete drain pipe 100/75 mm dia jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 57 | M&L 75 mm dia nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc all as specified and directed. |
| 58 | S&F cast ironsoil waste bends for 75 mm bore of pipe(any radius) plain bendcomplete all as specified and directed. |
| 59 | S&Fcast iron branch pieces of 75mm bore pipe, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified and directed. |
| 60 | S&F cast iron soil waste bends for 100 mm bore of pipe (any radius)complete all as specified and directed. |
| 61 | S&F CI branch pieces single (equal or un equal) ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door for 100mm bore of pipe complete all as specified and directed. |
| 62 | S&FCI socket (double) collars for100mm dia pipe with cement jointfixed to wall complete all as specified and directed. |
| 63 | S&F Cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using sand cast CI pipes 100 mm bore pipes etc complete all as specified and directed. |
| 64 | S&F Cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using sand cast CI pipes 75 mm bore pipes etc complete all as specified and directed. |
| 65 | Demolation of stone slabs and any pettern of tiles of any description or thickness in floors, aprons laid , bedded and pointed in type of motar etc all as specified and directed. |
| 66 | M&Lfor 20 mm thick Granite (of any type) work(table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 67 | M&L forscreed bed or bedding layer of mortar 15mm thick (1:6)for laying floor finishes/tiles complete all as specified and as directed. |
| 68 | S&F in repairCP Showerrosewith arms15mm dia complete all as specified and as directed. |
| 69 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, "P" or "S" trap, including connection to trap and flushing pipe, antisyphonage pipe incl PCC 1:5:10 type E2 in filling making good to floor etc all as specified. Make:- Cera,, Parryware, Hindware). |
| 70 | S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified. Make: Cera,, Parryware, Hindware) |
| 71 | S&F PVC connection of 15mm bore, 450 mm long with brass coupling on both ends of superior quality all as specified. |
| 72 | S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 73 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed. Make : Nirali/Prayag/Blue Star |
| 74 | S&F in repair 1.00 mm thick stainless steel plate rack ofover all size 600x900x100 mm of standard pattern complete all as specified and directed. Make : Prayag/Blue Star |
| 75 | S&F in repairs grating doom 125 mm dia with waste hole of stainless steel complete all as specified and directed by Engineer-in-Charge |
| 76 | Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc., all as directed. |
| 77 | S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete,all as specified and directed. Make: Sintex/Dhara/Rotex |
| 78 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed. |
| 79 | S&F in repair 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 80 | Supply & fixin repairsheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long completed all as specified and directed |
| 81 | S&F in repair glass corner self assembly, fancy type,made of 6 to 7mm thick sheet toughened glass of size 250x250mm,fixed with CP brackets,complete,all as specified and directed. |
| 82 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550 x 400 mm excluding taps, waste, chain and plug porcelain stopper but including brackets incl cutting for and pinning in ends of brackets or erecting stand incl 32 mm dia pvc waste pipe and 32 mm dia waste cupling etc complete all as specified.(Make:- Cera/Parryware/Hindware) |
| 83 | S&F in repair 15 mm bore CP wall mixer with provison for bath overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without overhead shower) fixed in iron pipes etc all as specified and directed. (Make- Cera/ Parryware/Plumber,Marc) |
| 84 | S&F in repairbrass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type all as specified. |
| 85 | S&F in repair coloured powder coated 25 mm dia aluminium drapery rod with natural wooden finish and wooden ornamental attachement at both ends and one set ornamental decorative finish wooden clamps complete all as specified and directed. |
| 86 | S&F in repair Towel ring 200mm dia superior quality fixed as in repair all as approved. |
| 87 | S&F in repair CP shop dish fancy type etc fixed on wall surfaces etc all as specified and directed.(Make - Jaquar,Plumber,Marc) |
| 88 | S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed. |
| 89 | S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair make complete all as specified and directed. |
| 90 | S&F, in repair, 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule all as specified and directed. (Make- Prayag/Cera & equivalent) |
| 91 | S&F in repair 18mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make cup board shutters, including demolition of existing cup board shutter complete all as specified and directed. Make :- Rajshree/Plastro green |
| 92 | S & F in repair18mm thickPVC boardof grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make cup board sides top and bottom, shelves inside the cup board and shutter or drawerincluding demolition of existing board any type or specification complete all as specified and directed. Make: Rajshri celuka or equivalent as approved by GE. |
| 93 | S & F continuous (Piono) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 94 | S&F 125 mm size alum, Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 95 | S&F in repairs Magnet catchfor kitchen cabinet shutters as per approvedsample complete all as specified and directed. |
| 96 | S&F in repair pillar tap 15mm dia long body,chromium plated, fancy type as in repair complete all as specified & directed. |
| 97 | S&F mild steel work for hold fasts and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed. |
| 98 | Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering incement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed. |
| 99 | Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following .(a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes byu porable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete. |
| 100 | M&L for PCC1:4:8 type D-2 (using 40 mm gradedstone aggregate) as in foundation filling,mass concrete etc complete all as specified. |
| 101 | M&L PCC 1:2:4 type B-1using 20 mm graded stone aggregate in drains and surface channels and finishing complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F 50 mm thick Pre cast cement concrete jallies type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:4including all mouldings, chamfers, weathering, throating etc including demolition of old complete all as specified and directed. |
| 103 | Formwork face of walls, parapets, coping, lintel beam, staircase and railing and similar work etc all as specified and directed. |
| 104 | M&L preparation of newly plastered surface of wall and applying three coats of white wash to wall. |
| 105 | M&L TMT bars 10 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 106 | M&L TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 107 | M&L for precast RCC 1:1.5:3 type A 1 as in cover slab and like for manhole/ drains and like with plane faces complete all as specified and directed by Engineer-in-Charge. |
| 108 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 109 | All as per sl item above but embedded on natural ground. |
| 110 | Dismantling fencing wire mesh,any type,complete all as specified and directed. |
| 111 | S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165complete all as specified and directed |
| 112 | Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified and directed |
| 113 | Supply only galvanised chain link fencing of size 50 x 50mm aperture and dia of were 4.00mmany size or type as approved by Engr-in -charge etc, complete all as specified and directed |
| 114 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed |
| 115 | Dismantling wrought iron or mildsteel work of any description not otherwise provideded for etc. |
| 116 | S&Fframed work as in door or gates of angle or other section with gusset plates , rails braces etc complete drilled for fixing of steel sheeting or other covering complete all as spd and directed. |
| 117 | M&L for0.63mm thick plain, black, mild steel sheeting, in ridges,hips, valley gutters,drip and straight flashings (length and girth as fixed)etc complete all as specified. |
| 118 | M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified and directed |
| 119 | S&F, in repairs galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm dia bards at 75mm spacings and straining and fixing to any type of standerd rails straining bolts, including, seuring or tying at crossings with and provision of galvanised mild steel wire, staples etc. complete all as specified. |
| 120 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for plinth course, parapets and railing upto 60cm height, coping, kneelers, bed plates, water troughs and the like including slightly rounded or chamfered angles and throughting ect compelet all as specified and directed |
| 121 | Demolition of RCC work of any description and in any position etc all as specified. |
| 122 | M&L precast cement concrete type B-1, 1:2:4 type (using 20mm graded stone aggregates) for landing, cover slabs (for main holes, drain etc, chullah hoods, chajjas, water trough shelves and similar articles etc, complete all as specified & derected |
| 123 | Dismantling existing sunken interlocking pavers block of any description, size and pattern and refixing the same in any location for proper matching with existing surface after carrying out the necessary repair to the under layer complete all as specified and directed (sand cushioning and sub base concrete will be measured separetely) |
| 124 | M & L for Sand filling under floors or in foundations including watering and consolidation. Etc coplete all as specified. |
| 125 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigmentlaid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
