Supply Of Face Milling Inserts Along With Milling Cutters.Face Milling Inserts Along With Milling Cutters., Face Milling Inserts Along With 100 Mm Dia Meter Cutters Of The Following Makes And Part Numbers. 1. Insert To Part Number Sngu1307c1anen-Mj T3225 , Bangalore-Karnataka

Supply Of Face Milling Inserts Along With Milling Cutters.Face Milling Inserts Along With Milling Cutters., Face Milling Inserts Along With 100 Mm Dia Meter Cutters Of The Following Makes And Part Numbers. 1. Insert To Part Number Sngu1307c1anen-Mj T3225 And Milling Cutter To Part Number Tasn13m100m32.Or08 Of Tungaloy Make.Or 2.Inserts Of Part Number Snmx 1205Ann And Milling Cutter Of Part Number Ms009-100- 832-08-06-Ap Of Walter Make Or 3. Inserts Part Number Snmx 1206 Ansn Mm Bcm35m / Snmx1206 Ansn Mp Bcp25m And Milling Cutter Part Number Bf45 Sn12.100 Z08 Make : Boehlerit.Or 4. Inserts To Part Number Snpx 1406 Ann And Milling Cutter To Part Number Snpx 1406 Of Kenna Metel Make.Or One Set Consists Of 1000 ( One Thousand ) Numbers Of Inserts With 8 Cutting Edges And 6 ( Six ) Face Milling Cutters To Suit The Inserts, Each Millng Cutter Shall Accomdate 8 Inserts. The Parameters Of The Machine ( Sema Gdc 100 ) On Which These Inserts Are Normally To Perform Are : A ) Speed: 1800Rpm B ) Feed : 780 Mm / Min C ) Depth Of Cut : 3Mm The Max Range Of Speed And Feed Of The Machine Is 300 Rpm And Feed Is 3000 Mm / Min. Performence : Two Cutters With 8 Inserts Each Are Used On The Machine I.E One On Rh Adn Lh Each, Inserts Have To Perform Milling Axles Ends For A Minimum Of 15 Axles / Edge.I.E 15 Axles. End Faces.10-15 Mm Of Axle Ends Are Milled In Two Or More Passes. Note: 1. Bank Curantee Towards Performance Needs To Be Furnished. 2.Manufacturers / Authorised Dealers Other Than Those Included In The Above Description Can Also Participate In The Tender And Such Of The Firms Have To Offer The Material For Trails Before Bulk Supply If Order Is Placed On Them. 3. Cutters With Other Than 8 Pockets For Inserts Wil Also Be Considerd Provided Meeting The Performance And Such That The Cutter Does Not Caused Damages To The Machine Or The Axles. 4. Valid Authorisation Certificate From Oem To Be Submitted Along With The Offer. 5. 2 Nos Of Cutters Along With 100 No Of Inserts Will Be Supplied Before Bulk Supply. Page 1 Of 6 Run Date / Time: 10 / 09 / 2022 10:34:52Stores / Rwf Tender Document => Limited

Refer document

Refer document