|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of hard/dense soil. Complete all as specified and directed by Engr-in-Charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layernot exceeding 25cm thick after pipes have beenlaid and tested complete, all as specified and directed by Engr-in-Charge. |
| 3 | Removing excavated material to a distance notexceeding50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete, all as specified and directed by Engr-in-Charge. |
| 4 | Taking up or down old unseviceable GI pipe of size 300 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. |
| 5 | All as perserial item No 4.00 here-in-before but of 250 mm dia. |
| 6 | All as perserial item No 4.00 here-in-before but of 200 mm dia. |
| 7 | All as perserial item No 4.00 here-in-before but of 150 mm dia. |
| 8 | All as perserial item No 4.00 here-in-before but of 100 mm dia. |
| 9 | All as perserial item No 4.00 here-in-before but of 80 mm dia. |
| 10 | All as perserial item No 4.00 here-in-before but of 50 mm dia. |
| 11 | All as perserial item No 4.00 here-in-before but of 40 mm dia. |
| 12 | All as perserial item No 4.00 here-in-before but of 25 mm dia. |
| 13 | All as per serial item No 4.00 here-in-before but of 20 mm dia. |
| 14 | All as perserial item No 4.00 here-in-before but of 15 mm dia. |
| 15 | GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 16 | All as perserial item No 15.00 here-in-before but of 100 mm dia. |
| 17 | All as perserial item No 15.00here-in-before but of 80 mm dia. |
| 18 | All as perserial item No 15.00 here-in-before but of 50 mm dia. |
| 19 | All as perserial item No 15.00 here-in-before but of 40 mm dia. |
| 20 | All as perserial item No 15.00 here-in-before but of 25 mm dia. |
| 21 | All as perserial item No 15.00 here-in-before but of 20 mm dia. |
| 22 | All as perserial item No 12.00 here-in-before but of 15 mm dia. |
| 23 | Refixing GI/CI pipe obtained from Item No. 04 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm dia complete including main branch connections xomplete all as specified and directed by Engr-in-Charge. |
| 24 | All as per serial item No 23.00 here-in-before but of 150 mm dia obtained from item No. 07. |
| 25 | All as per serial item No 23.00 here-in-before but of 100 mm dia obtained from item No. 08. |
| 26 | All as per serial item No 23.00 here-in-before but of 80 mm dia obtained from item No. 09. |
| 27 | All as per serial item No 23.00 here-in-before but of 50 mm dia obtained from item No. 10. |
| 28 | All as per serial item No 23.00 here-in-before but of 40 mm dia obtained from item No. 11. |
| 29 | All as per serial item No 23.00 here-in-before but of 25 mm dia obtained from item No. 12. |
| 30 | All as per serial item No 23.00 here-in-before but of 20 mm dia obtained from item No. 13. |
| 31 | All as per serial item No 23.00 here-in-before but of 15 mm dia obtained from item No. 14. |
| 32 | Taking up or down CI/DI/MS water mains pipe 250 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply, laying, jointing and testing ERW MS pipe class \"B\" of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% confirming to IS-3589, (ISI marked with minimum tensile strength of 410 mega pascals and steelgrade of Fe -410) alongwith flanged joints including nuts, bolts, washers, flanges etc, laid in trenches/ along road/on surface/ slopes/pillars/ culverts/ causeways etc, including connection with main and branch line of CI/DI/GI/MS pipes with fittings, complete all as specified by and directed by Engr-in-Charge.Note :- (i) Flanges to be provided at every 6 m length or shorter length as directed by Engineer-in- Charge. Flange will be welded to the pipe and gasket to be provided between two flanges and will be fixed with 12 Nos of nuts and bolts (M20 Type) at each jointing. Flanges will be of IS-6392 specifications. The cost of flanges, nuts & bolts, gaskets and connecting of flanges to pipeline by welding will be deemed to be included in the quoted item rate.(ii) All standard fittings such as bends any type radius or angle, tapers any type (straight, bend, increasing, decreasing or double socket etc) TEE pieces single branch, \"Y\" Junction, double branch, cross collars, cap and plugs, MS flanges complete bends, TEE pieces, collars, elbow, tail piece etc jointing are deemed to be included in the quoted item rate. (iii) Jointing of pipe line will be done through flange and circular welding as per directed by Engr-in-Charge. (iv) Excavation and earthwork will be measured and paid separately. |
| 34 | All as perserial item No 33.00 here-in-before but of size 250 mm bore. |
| 35 | All as perserial item No 33.00 here-in-before but of size 200 mm bore. |
| 36 | Supply and fix in replacement cast iron sluice valve suitable of size 300 mm (PN 1.6) ISI Marked with iron wheel headboth end flanged, non rising type and jointing withthe rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing. Item Art. No : 1079B Make: Zoloto or equivelant in Kirloskar/BVI/BIR/Leader.Complete all as specified and directed by Engr-in-Charge. |
| 37 | All as perserial item No 36.00 here-in-before but of size 250 mm dia. |
| 38 | All as perserial item No 36.00 here-in-before but of size 200 mm dia. |
| 39 | Cast Iron sluice valve of sizes 150 mm dia (PN 1.6) ISI Marked with iron wheel headboth end flanged, CI /steel spindle, non rising typecomplete with Neoprene rubber gasket, nuts, bolts and washers etc, complete all as specified and directed by Engr-in-Charge. |
| 40 | All as per serial item No 39.00 here-in-before but of size 100mm dia. |
| 41 | All as per serial item No 39.00 here-in-before but of size 80mm dia. |
| 42 | Supply and fix in replacement of cast iron non return valve suitable for 300 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing withthe rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing. Item Art No 1083A complete all as specified and directed by Engr-in-Charge.Make: Zoloto or equivelant in Leader/Kirloskar/BVI/BIR. |
| 43 | All as per serial item No 42.00 here-in-before but size of 250mm bore. |
| 44 | All as per serial item No 42.00 here-in-before but size of 200mm bore. |
| 45 | All as per serial item No 42.00 here-in-before but size of 150mm bore. |
| 46 | All as per serial item No 42.00 here-in-before but size of 100mm bore. |
| 47 | All as per serial item No 42.00 here-in-before but size of 80mm bore. |
| 48 | Cast iron air release valve (in replacement) with two air outlets of size 100 mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washerswith arrangement for fixing, including taking down complete.Item Code No/ Size CI 026/N complete all as specified and directed by Engr-in-Charge.Make: Leader or equivelant in Kirloskar/BVI/BIR. |
| 49 | All as perser item 48.00 here-in-before but of size 80 mm dia and Item code No/ Size CI 026/L. |
| 50 | Repair to old sluice valve of sizes 300mm dia for check nut, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of sluice valve & spindle including fixing & testing complete all as specified and directed by Engr-in-Charge. |
| 51 | All as perserial item No 50.00 here-in-before but of size 250mm dia. |
| 52 | All as perserial item No 50.00 here-in-before but of size 200mm dia. |
| 53 | All as perserial item No 50.00 here-in-before but of size 150mm dia. |
| 54 | All as perserial item No 50.00 here-in-before but of size 100mm dia. |
| 55 | All as perserial item No 50.00 here-in-before but of size 80mm dia. |
| 56 | Repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore by providing new lead ,using good quality spun yarn, rubber gasket jointing material ,etc including necessary excavation, returning fillingin trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge.Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra fittings/pipe will be measured and paid separately. |
| 57 | All as perserial item No 56.00 here-in-before but of dia 200/250 mm bore. |
| 58 | All as perserial item No 56.00 here-in-before but of dia 150 mm bore. |
| 59 | All as perserial item No 56.00 here-in-before but of dia 100 mm bore. |
| 60 | Repair to leaking GI pipe line of size 50 mm to 80 mm bore by providing necessary fitting such as socket, Tee, Elbow,etc including necessary excavation, returning fillingin trenches in any type of soil,bailing out water, and any depth complete all as specified and directed by Engr-in-Charge.Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra pipe will be measured and paid separately. |
| 61 | All as per serial item No 60.00 here-in-before but of size 20mm to 40mm bore pipe. |
| 62 | Repair to leaking flanged/circular welding joints of 250-300 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning fillingin trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. Note:- Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechnical excavation work and man power at site requirement with making good distrubed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra fittings/pipe will be measured and paid sepately. |
| 63 | All as perserial item No 62.00 here-in-before but of dia 100to 200 mm bore pipe. |
| 64 | Cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existingcomplete all as specified and directed by Engr-in-Charge. |
| 65 | PCC 1:3:6 type C-2 (using 40 mm graded crushed stoneaggregate) cement concrete inas in foundation filling of pole & stay complete as specified and directed by Engr-in-Charge. |
| 66 | Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg complete all as specified and directed by Engr-in-Charge. |
| 67 | Cast iron fittings for spigot and socket ends for pressure pipe for water mains such as bends, tapers, tee pieces single branch, cross collar, caps and plugs suitable for 200 to 300 mm bore, all specifications as per IS-1538 (Pt-1 to 23)-1976 and all as specified and directed by Engr-in-Charge. |
| 68 | All as per ser item No 67.00 above but of size150mm bore. |
| 69 | Supply fabrication and fixing MS joints like Flanged, bends, Tee, Tapers, collars, elbow, tail piece (any type) caps, plugs for 80 mm to 300 mm bore pipecomplete all as specified and directed by Engr-in-Charge. |
| 70 | Butterfly valves, 80mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked),complete all as specified & directed by Engr-in-Charge. |
| 71 | Gun-metal, globeor gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked),complete all as specified & directed by Engr-in-Charge. |
| 72 | All as per ser item No 71.00 here-in-before but of size 40 mm bore. |
| 73 | All as per ser item No 71.00 here-in-before but of size 25 mm bore. |
| 74 | All as per ser item No 71.00 here-in-before but of size 20 mm bore. |
| 75 | All as per ser item No 71.00 here-in-before but of size 15 mm bore. |
| 76 | Gun-metal, globeor gate valves, 40mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked),complete all as specified & directed by Engr-in-Charge. |
| 77 | Gun-metal, globeor gate valves, 25mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked),complete all as specified and directed by Engr-in-Charge. |
| 78 | Gun-metal, globeor gate valves, 20mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked),complete all as specified and directed by Engr-in-Charge. |
| 79 | Gun-metal, globeor gate valves, 15mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked),complete all as specified & directed by Engr-in-Charge. |
| 80 | GI fittings medium grade ISI marked including complete all as required at site complete all as specified anddirected by Engr-in-Charge. |
| 81 | Elbow 15mm. |
| 82 | Elbow 20mm. |
| 83 | Elbow 25mm |
| 84 | Elbow 40mm |
| 85 | Elbow 50mm |
| 86 | Elbow 80mm |
| 87 | Socket 15mm |
| 88 | Socket 20mm |
| 89 | Socket 25mm |
| 90 | Socket 40mm |
| 91 | Socket 50mm |
| 92 | Socket 80mm |
| 93 | Union 15mm |
| 94 | Union 20mm |
| 95 | Union 25mm |
| 96 | Union 40mm |
| 97 | Union 50mm |
| 98 | Union 80mm |
| 99 | Elbow reducer 20 x 15mm |
| 100 | Elbow reducer 25 x 20mm |
| 101 | Elbow reducer 40 x 25mm |
| 102 | Socket reducer 25x20mm |
| 103 | Socket reducer 40x25mm |
| 104 | Socket reducer 40x20mm |
| 105 | Socket reducer 50x25mm |
| 106 | Nipple 15 x50mm |
| 107 | Nipple 15 x100mm |
| 108 | Nipple 20 x50mm |
| 109 | Nipple 20 x100mm |
| 110 | Nipple 25 x 50mm |
| 111 | Nipple 25 x 100mm |
| 112 | Nipple 40 x 50mm |
| 113 | Nipple 40 x 100mm |
| 114 | Nipple 50 x 50mm |
| 115 | Nipple 50 x 100mm |
| 116 | Tee 15mm |
| 117 | Tee 20mm |
| 118 | Tee 25mm |
| 119 | Tee 20x15mm |
| 120 | Tee 25x20mm |
| 121 | Tee 40x15mm |
| 122 | Tee 40x20mm |
| 123 | Tee 40x25mm |
| 124 | Tee 50x25mm |
| 125 | Dead plug 15mm |
| 126 | Dead plug 20mm |
| 127 | Dead plug 25mm |
| 128 | Dead plug 40mm |
| 129 | Dead plug 50mm |
| 130 | Lead |
| 131 | Lead wool |
| 132 | Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 10 HP all as specified and directed by Engr-in-Charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates.(ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
| 133 | New parts for single/double stage pump of capacity 10HP as per manufacturer\"s composition of existing make of pump as below all as specified and directed by Engr-in-Charge. |
| 134 | Pump impeller made out of Stainless Steel . Make : Kirloskar/Wilo Mather Platt or equivalent make as approved be GE. |
| 135 | Pump shaft stainless steel shaft complete with check nut and keys. |
| 136 | Shaft sleeves. |
| 137 | Casing bearing. |
| 138 | Bearing housing. |
| 139 | Tyre coupling/star coupling. |
| 140 | Gland cup with nut and bolts. |
| 141 | Disconnecting electric connection of 10 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same complete all as directed by Engr-in-Charge.Note: (a)Rewinding of motor will be measured and paid separately under relevent item.(b)The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at siteand refixing of serviceable motor duly functional and testing complete at its existing location/position. |
| 142 | Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class\"B\" paper insulation inside the slots, rewinding the motor of capacity 10 HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted. Make : Atlas/Devi Dayal or equivalent make. |
| 143 | Pump bearing No. 6307 C3. Make:-SKF/NBC/NRB or equivalent make. |
| 144 | Supply, installation, commisioning and testing of LT Panel board indoor type mounted on rigid angle iron frame, overall size not less than 1200 x1200 x 500 mm having independent compartment for busbar incoming and outgoing feeders, dust and vermin proof, factory made, fabricated out of 2 mm thick CRCA sheet suitable for 3 phase 415 V, 50 Hz AC supply busbar chamber with copper busbar 100 Amp rating for 3 phase and neutral for wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators 01 set, common earth busbar of GI strip 32 x6 at bottom with panel board at 2 earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables and complete panel board painted with powder coating in siemens Grey colour and fabricated with double door system locking arrangement all as approved and comprising as under:- |
| 145 | Incoming :- (i) MCCB 4 Pole, Current rating 63 Amps with electronic trip unit, adjustable overload & short circuit, breaking capacity 26 KA at 415 V, 50 Hz, including with extended terminals, frame size/ type compact Havells, IHLFENF0063- 01 Nos.(ii) Changeover Switch 63 Amp 4 Pole - 01 Nos.(iii)Meter module with Voltmeter, Ammeter, Selector Switch, CTs Control Fuse & Phase Indicating lamps.Outgoing :- (i) Fully automatic softstar delta motor starterwith single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motorof capacity 10 HPcomplete all as directed by Engr-in-Charge.Make-Havells/L&T/IndoAsian - 02 Nos. |
| 146 | Earthing of machinery/equipment Installed at power house/substation with galvanised steel earth plate electrode 600 mm × 600 mm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected togalvanised iron strip 32× 6mm as earthing leadby means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engr-in-Charge. |
| 147 | Supply and laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 35 sqmm 3.5 core laid in trenches,ducts, pipes complete all as specified and directed by Engr-in-Charge. |
| 148 | PVC insulated heavy duty industrial cables single core copper (in replacement ) conductor(flexible) PVC insulated cable 1100 voltnominal area of conductor 16 sqmm inculding taking down existing old unserviceable cable of complete all as directed by Engr -in-Charge. |
| 149 | Copper thimble suitable for 16 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge. |
| 150 | Aluminium thimble of 35 sqmm size for cables complete all as specified and directed by Engr-in-Charge. |
| 151 | Painting of pump and motor, frame including surface preparation by scrappingwith emery paper and paintingtwo coats of synthetic enamel paintover one coat of red oxide primer of existing colour of approved make to the satisfaction complete all as specified and directed by Engr-in-Charge. |
| 152 | Gland packing type 3 of size 8 mm made of asbestos grip (in replacement) with silicon complete all as specified and directed by Engr-in-Charge. Make : Turner/ Champion/Jyoti. |
| 153 | MS stud boltsof existing size (in replacement) suitable for pumps and motors of various capacity installed at installations complete all as specified and directed by Engr-in-Charge. |
| 154 | Grouting nuts and bolts of existing size (in replacement) suitable for pumps and motors foundation of various capacity installed at installations complete all as specified and directed by Engr-in-Charge. |
