|
| 1 | Dismantling existing electric motor 1/1.5/2/2.5/3/3.2 HP electric driven single phase/three phase 220/415 volts from foundation after disconnecting electric motor and transporting the same to work shop for repair and refixing the same after repair and making electric connection including necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed .(All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 2 | Dismantling existing electric motor 5/6.5/7.5 HP electric driven 3 phase 415 volts from foundation after disconnecting electric motor and transporting the same at work shop for repair and refixing the same after repair and making electric connection including necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed.(All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 3 | Dismantling the existing electric motor 10 HP submersible electric driven 3 phase 415 volts from existng system after disconnecting electric motor and transporting the same to work shop for repair and refixing the same after repair and making electric connection including necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed.(All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 4 | Dismantling existing electric motor 15/12.5 HP electric driven 3 phase 415 volts foundation after disconnecting electric motor and transporting the same at work shop for repair and refixing the same after repair and making electric connectionincluding necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed. (All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 5 | Dismantling existing electric motor 20 HP electric driven 3 phase 415 volts foundation after disconnecting electric motor and transporting the same at work shop for repair and refixing the same after repair and making electric connectionincluding necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed. (All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 6 | Dismantling existing electric motor 25 HP electric driven 3 phase 415 volts foundation after disconnecting electric motor and transporting the same at work shop for repair and refixing the same after repair and making electric connectionincluding necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed. (All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 7 | Dismantling existing electric motor 40 HP electric driven 3 phase 415 volts foundation after disconnecting electric motor and transporting the same at work shop for repair and refixing the same after repair and making electric connectionincluding necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed. (All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 8 | Dismantling existing electric motor 60 HP electric driven 3 phase 415 volts foundation after disconnecting electric motor and transporting the same at work shop for repair and refixing the same after repair and making electric connectionincluding necessary nut and bolts for foundation, packings for allignment etc. and testing after installation complete all as specified and directed. (All spares required for repairing of the pump and motor will be measures and paid in relevant itemsas supply & fix.) |
| 9 | M&L for rewinding of induction motor 1/1.5/2/3/3.2 HP 3 phase 415 volts 50 Hz. by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with proper insulation and applying varnish, earring the stator winding and assembling all parts of motor and pump including testing after connecting up with starter complete all as specified and directed . |
| 10 | M&L for rewinding of induction motor 5/6.5/7.5 HP 3 phase 415 volts 50 Hz.by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with proper insulation and applying varnish, earring the stator winding and assembling all parts of motor and pump including testing after connecting up with starter complete all as specified and directed . |
| 11 | M&L for rewinding of induction motor 10 HP submersible 3 phase 415 volts 50 Hz. by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with proper insulation and applying varnish, earring the stator winding and assembling all parts of motor and pump including testing after connecting up with starter complete all as specified and directed . |
| 12 | M&L for rewinding of induction motor 15/12.5 HP 3 phase 415 volts 50 Hz. by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with ‘E’ class of insulation and applying varnish, earring the stator winding and assembling all parts of motor and pump including testing after connecting up with starter complete all as specified and directed . |
| 13 | M&L rewinding of induction motor 20 HP 3 phase 415 volts 50 Hz.by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with proper insulation and applying varnish, earring the stator winding and assembling all parts ofmotor and pump including testing after connecting up with starter complete all as specified and directed . |
| 14 | M&L rewinding of centrifugal pump set motor 25 HP 3 phase 415 volts 50 Hz. by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with proper insulation and applying varnish, earring the stator winding and assembling all parts ofmotor and pump including testing after connecting up with starter complete all as specified and directed . |
| 15 | M&L rewinding of centrifugal pump set motor 40 HP 3 phase 415 volts 50 Hz. by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with proper insulation and applying varnish, earring the stator winding and assembling all parts ofmotor and pump including testing after connecting up with starter complete all as specified and directed . |
| 16 | M&L rewinding of centrifugal pump set motor 60 HP 3 phase 415 volts 50 Hz. by dismantling and removing the burnt out copper winding cleaning the slots of stator thoroughly and rewinding the stator with polyester based copper wire of the same gauge with proper insulation and applying varnish, earring the stator winding and assembling all parts ofmotor and pump including testing after connecting up with starter complete all as specified and directed . |
| 17 | Opening the mono block pump set of any model & capacity1 HP to 3.5 HP including dismantling from motor and checking theserviceability of spare parts and replacing the defective spare parts with new spare parts of same make, replacement of gaskets, gland packings, bush,worn out nut, bolts washers if any, greasing etc., for smooth running complete all as specified and directed. Note: (I) spares such as gasket, grease, bolt, nuts and washers, shaft sleeve,bush, gland packing etc. are deemed to be included in the cost of servicing. (ii) Bearings,impellers, shaftif required to be replaced will be measured & paid separtely under relevent items. |
| 18 | Opening the mono block pump/submersible pump set of any model & capacity5 HP to 7.5 HP including opening the motor and checking theserviceability of spare parts and replacing the defective spare parts with new spare parts of same make including electric connection, replacement of gaskets, bush, etc., for smooth running complete all as specified and directed . Note: (I) spares such as gasket, grease, bolt, nuts and washers, shaft sleeve,bush, gland packing etc. are deemed to be included in the cost of servicing. (ii) Bearings,impellers, shaftif required to be replaced will be measured & paid separtely under relevent items. |
| 19 | Opening the submersiblepump set of any model & capacity10 HPincluding dismantling from motor and checking theserviceability of spare parts and replacing the defective spare parts with new spare parts of same make, replacement of gaskets, gland packings, bush,worn out nut, bolts washers if any, greasing etc., for smooth running complete all as specified and directed . Note : (I) spares such as gasket, grease, bolt, nuts and washers, shaft sleeve,bush, gland packing etc. are deemed to be included in the cost of servicing. (ii) Bearings,impellers, shaft if required to be replaced will be measured &paid separtely under relevent items. |
| 20 | Opening the mono block/ centrifugalpump set of any model & capacity12.5 HP to 15 HP including dismantling from motor and checking theserviceability of spare parts and replacing the defective spare parts with new spare parts of same make, replacement of gaskets, gland packings, bush,worn out nut, bolts washers if any, greasing etc., for smooth running complete all as directed. Note : (I) spares such as gasket, grease, bolt, nuts and washers, shaft sleeve,bush, gland packing etc. are deemed to be included in the cost of servicing. (ii) Bearings,impellers, shaft if required to be replaced will be measured &paid separtely under relevent items. |
| 21 | Opening the mono block pump/centrifugal set of any model & capacity20 HP to 25 HPincluding dismantling from motor and checking theserviceability of spare parts and replacing the defective spare parts with new spare parts of same make, replacement of gaskets, gland packings, bush,worn out nut, bolts washers if any, greasing etc., for smooth running complete all as specified and directed . Note : (I) spares such as gasket, grease, bolt, nuts and washers, shaft sleeve,bush, gland packing etc. are deemed to be included in the cost of servicing. (ii) Bearings, impellers, shafts if required to be replaced will be measured &paid separtely under relevent items. |
| 22 | Opening the centrifugal pump set of any model & capacity40 HP to 60 HP including dismantling from motor and checking theserviceability of spare parts and replacing the defective spare parts with new spare parts of same make, replacement of gaskets, gland packings, bush,worn out nut, bolts washers if any, greasing etc., for smooth running complete all as specified and directed . Note: (I) spares such as gasket, grease, bolt, nuts and washers, shaft sleeve,bush, gland packing etc. are deemed to be included in the cost of servicing. (ii) Bearings, impeller, shafts if required to be replaced will be measured & paid separtely under relevent items. |
| 23 | Supply only new set of driving end and non driving end bearing of pump sets of capacity 40 HP to 60 HP, including taking out defective bearing units etc completeall as specified and directed. |
| 24 | Supply only new set of driving end and non driving end bearing of pump sets of capacity 20 HPto 25 HP, including taking out defective bearing units etc completeall as specified and directed. |
| 25 | Supply only new set of driving end and non driving end bearing of pump sets of capacity 7.5 HP to 15 HP, including taking out defective bearing units etc completeall as specified and directed. |
| 26 | Supply only new set of driving end and non driving end bearing of pump sets of capacity5 to 7.5 HP, including taking out defective bearing units etc completeall as specified and directed. |
| 27 | Supply only new set of driving end and non driving end bearing of pump sets of capacity 0.5 to 3 HP, including taking out defective bearing units etc completeall as specified and directed. |
| 28 | Supply only pump impeller made of bronze suitable size for 12.5/15 HP centrifugal pump set completeall as specified and directed. |
| 29 | Supply only pump impeller made of bronze of suitable size for 20 HPcentrifugal pump set completeall as specified and directed. |
| 30 | Supply only pump impeller made of bronze of suitable size for 25 HP centrifugal pump set completeall as specified and directed. |
| 31 | Supply only pump impeller made of bronze of suitable size for 40 HP centrifugal pump set completeall as specified and directed. |
| 32 | Supply only stainless steel shaft and new brass bush of appropriate size suitable for centrifugal pump set of capacity 20 HP to 25 HP including any type lathe work for fixing bearing, bush, CI/Gun Metal bush etc completeall as specified and directed. |
| 33 | Supply only stainless steel shaft and new brass bush of appropriate size suitable for centrifugal pump set of capacity 40 HP including any type lathe work for fixing bearing, bush, CI/Gun Metal bush etc completeall as specified and directed. |
| 34 | Supplyand fixing in repair rubber coupling pad between motor and pump 12.5/15/20/25 HP complete with rubber tyre, CI/MS flanges and rings nuts, bolts, washers including lathe work for cutting holes for both shafts and providing keys and nut, bolts etc complete all as specified and directed. |
| 35 | Supplyand fixing in repairrubber coupling pad between motor and pump 40 HP complete with rubber tyre, CI/MS flanges and rings nuts, bolts, washers including lathe work for cutting holes for both shafts and providing keys and nut, bolts etc complete all as specified and directed. |
| 36 | Supplyand fixing in repairrubber coupling pad between motor and pump 60 HP complete with rubber tyre, CI/MS flanges and rings nuts, bolts, washers including lathe work for cutting holes for both shafts and providing keys and nut, bolts etc complete all as specified and directed. |
| 37 | Material and labour for gland packing of pumps of capacity 5 HP to 25 HP with hemp or asbestosimpregneted with teflon packing by completely removing the old packings from glandand necessary greasing of the gland bush nuts and bolts complete all as specified and directed . |
| 38 | Material and labour for gland packing of pumps of capacity 40HP to 60 HP with hemp or asbestosimpregneted with teflon packing by completely removing the old packings from glandand necessary greasing of the gland bush nuts and bolts complete all as specified and directed . |
| 39 | Supply and fixing in repairs Air cock made of Gun matel suitable for 15 to 40 HP motor pump set complete all as specified directed . |
| 40 | Dismantling the existing unserviceable GI tubing from pump suction pipe complete and S & L new GI tubing medium grade galvanised with all fittingand fixed complete to walls and ceillings or laid in floors for suction pipe of pump including threading and fixing of foot valve complete all as specified and directed of 80 mm bore dia |
| 41 | Dismantling the existing unserviceable GI tubing from pump suction pipe complete and S & L new GI tubing medium grade galvanised with all fittingand fixed complete to walls and ceillings or laid in floors for suction pipe of pump including threading and fixing of foot valve complete all as specified and directed of 100 mm bore dia. |
| 42 | Supply & fix in replacement oftimer, suitable for starter ofML1.5/ML2/ML3/ML4/MNX32complete all as specified and directed. |
| 43 | Supply and fix in replacement Power contactor 3 pole 415 V with Auxilary contact 1 NO + 1 NC with timer and overload relay of rating 50 A suitable for 40 HP , 3 phase induction motor complete all as specified and directed. Make L&T/ Seimens/ C&S Electricals/Schneider |
| 44 | Supply and fix in replacement Power contactor 3 pole 415 V with Auxilary contact 1 NO + 1 NCwith timer and overload relay of rating 30 A suitable for 25 HP , 3 phase induction motor complete all as specified and directed.Make L&T/ Seimens/ C&S Electricals/Schneider |
| 45 | Supply and fix in replacement Power contactor 3 pole 415 V with Auxilary contact 1 NO + 1 NCwith timer and overload relay of rating 30 A or suitable for 20 HP , 3 phase induction motor complete all as specified and directed. Make L&T/ Seimens/ C&S Electricals/Schneider |
| 46 | Supply and fix in replacementthermal over load relay for ML2/ML3 contactors upto 42 Amps complete all as specified and directed.Make L&T/Seimens/ C&S Electricals/Schneider |
| 47 | Supply and fix in replacementthermal over load relay for ML1/ ML1.5 contactors upto 16 Amps complete all as specified and directed. Make L&T/Seimens/ C&S Electricals/Schneider |
| 48 | Supply & install in replacement DOL starter suitable for pump set, capacity 10 HP with relay protection complete all as specified and directed.Make L&T/ Seimens/ C&S Electricals/Schneider. |
| 49 | Supply & install in replacement DOL starter suitable for pump set, capacity 1 HP to 7.5 HP with relay protection complete all as specified and directed.Make L&T/Seimens/ C&S Electricals/Schneider. |
| 50 | Supply & install in replacement fully automatic star delta starter suitable for pump set of capacity 40 HP, Cat No BE3-D 5035 N 355 of make C&S Electricals or its equivalent make ofSeimens/ L & T/ Havells/ Standard complete all as specified and directed. |
| 51 | Supply & install in replacement fully automatic star delta starter suitable for pump set of capacity 25 HP, Cat No BE3-D 3235 N 353 of make C&S Electricals or its equivalent make ofSeimens/ L & T/ Havells/ Standard complete all as specified and directed. |
| 52 | Supply & install in replacement fully automatic star delta starter suitable for pump set of capacity 12.5 HP, Cat No BE3-D 1735 N 316X of make C&S Electricals or its equivalent make ofSeimens/ L & T/ Havells/ Standard complete all as specified and directed. |
| 53 | Supply and fixing single phase preventor suitable for 12.5/15/20/25 HP motors as per existing and all as specified and directed . |
| 54 | Supply and fixing single phase preventor suitable for 40 HP motors as per existing and all as specified and directed . |
| 55 | Supply and fix Aluminium strip 25X3.15 mm complete with saddles and fixing screws complete all as specified and directed. |
| 56 | M&L for earthingin replacement complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plateusing 25X4 mmGI earth strip as earth lead moulded and riveted to earthplate at one end and connected to main equipment at switch/control board at another end, GI earth leadincased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate,GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mmthick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mmc/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work includinglaying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion..(Note : 1.If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.) |
| 57 | Supply, & fixing indicator lamps neon type on each phase with standard colors and and pin/plug type as existing set of 03 Nos and all as specified and directed . |
| 58 | Supply and fixing in replacement old MCCB of rating 4 Pole 160 A,having breaking capacity of 25 KA having same dimentions as old one to match the slot position complete all as specified and directed. Make: Indosian, legrand , C&S or equivalent. |
| 59 | Supply and fixing in replacement old MCCB of rating 4 Pole 63A, 25 KA having same dimentions as old one to match the slot position complete all as specified and directed. Make: Indosian, legrand , C&S or equivalent. |
| 60 | Supply and fix in repairmotors fan and cover suitable for motors cap 12.5/15 HP with nut bolts washers etc as per existing/ sample & all as directed . |
| 61 | Supply and fix in repairmotors fan and cover suitable for motors cap 20 HP with nut bolts washers etc as per existing/ sample & all as specified and directed . |
| 62 | Supply and fix in repair centrifugal motors fan and cover suitable for motors cap 25 HP with nut bolts washers etc as per existing/ sample & all as specified and directed . |
| 63 | Supply and fix in repair centrifugal motors fan and cover suitable for motors cap 40 HP with nut bolts washers etc as per existing/ sample & all as specified and directed . |
| 64 | Supply and fixing electric motor terminal plate made of bakelite base plate with brass terminals, nuts and washers suitable for 12/15/20/25/40 HP motor of any typecomplete all as specified and directed. |
| 65 | M&L painting with two coats of synthetic enamel paint including scraping and removing old paint from steel surfaces of any position on the valves of size 80mm to 200mm complete all as specified and as directed . |
| 66 | M&L painting with two coats of synthetic enamel paint including scraping and removing old paint from steel surfaces of any position on the valve chamber cover any size complete all as specified and asdirected . |
| 67 | M&L applying two coats of synthetic enamel paint on pump, motor, cast iron pipes installed at pump house (as per MES colour code) inlet and outlet pipe, header, GI suction pipe from sump bottom to pump, including writing letter / figure 5mm wide and 4cm in height with black tint over white base in capital letter complete all as specified and asdirected .Note: Subject matter for writing shall be provided . |
| 68 | Chemical analysis and testing ofwater sample through registered lab including collection of water at source as specified and directedand submitting test report to Department complete in every three month at Jalipa Military station. |
| 69 | Bactriological test of water sample through registered lab including collection of water at sources installed at Jalipa Mil station as specified and directedand submitting test report to Department every three month. |
| 70 | Inspection, checking of defect, repair / replacement of defective parts, sensor and maint of existing RO plant of capacity 6000 ltr hrs (Make : ROCHEM) installed at Jalipa Pump houseas per maintainancemanual of manufacturer to meet the required condition of water by back washing cleaning of membrane, cleaning of cartridge filter, servicing of chemical dozer, calibration of level indicator, cleaning of chemical Tank and all control valves etc complete all as specified and directed.Note:- (a) The contracotor has to arrange for a visit every monthly during the period of contract andemergency call back servicesto be attended within 24 hourscomplete all as directed .(b) Spare parts for replacement and chemical required forservicing RO plant shall be measured and paid seperately under respective item of Sch \"A\".(c) The cost of replacement of small parts such as nuts bolts, washer, screws, thimble lugs, gasket, rubber washers, wire etc.shall be deemed to be included in unit rates quoted by the contractor (d) Cost oftools, plant, equipment etc required for service shall be deemed to be included in unit rates quoted by the contractor. |
| 71 | All as per Srl item no 70 above but for the RO Plant located at JCO mess at near 17 garud at Jalipa military station. |
| 72 | S&F in replacement of following existing defective/unservicable parts of RO plant with new one of the same make and type/model no and make mentioned in respective items including testing complete all as specified and directed. (a) Cartridge filter 2.5\" x 20\". |
| 73 | All as per Srl item no 71 above but Cartridge filter 1.5\" x 10\". |
| 74 | All as per Srl item no 71 above but Membrane 4\" x 40\" (CPA2-4040). Make : DOE/Hydronautics |
| 75 | All as per Srl item no 71 above butMembrane 8\" x 40\" (CPA2-8040). Make : DOE/Hydronautics |
| 76 | All as per Srl item no 71 above but Rubber pneumatics tube, hose conforming to IS-446187, type 2 of size 1.5 \" Make :DOE/Hydronautics |
| 77 | All as per Srl item no 71 above but Water pressure gauge. |
| 78 | All as per Srl item no 71 above but PVCpipe 40 mm dia heavy duty |
| 79 | All as per Srl item no 71 above but Anti scalant solution in container |
| 80 | All as per Srl item no 71 above but Activated carbon 900 IV |
| 81 | All as per Srl item no 71 above but Sand Gravel mixture |
| 82 | All as per Srl item no 71 above but Multiport Valve |
| 83 | Material and labour for removing the rusted body of RO plant platform complete for necessary welding works required to the platform, apply red-oxide layer on the RO plant base and then painting to the base complete all as specified and directed with water-resistance paint and colour code as directedat RO plant at 17 Guards. |
| 84 | Material and labour for removing the rusted body of RO plant platform complete for necessary welding works required to the platform, apply red-oxide layer on the RO plant base and then painting to the base complete all as specified and directed with water-resistance paint and colour code as directedat RO plant at MES pump house. |
| 85 | M&L cleaning of RCC under ground sump of capacity 2.0 lakh gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 86 | M&L cleaning of RCC under ground sump of capacity 1.0 lakh gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 87 | M&L cleaning of RCC under ground sump of capacity 75000 gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 88 | M&L cleaning of RCC under ground sump of capacity 60000 gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 89 | M&L cleaning of RCC under ground sump of capacity 50000 gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 90 | M&L cleaning of RCC under ground sump of capacity 25000 gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 91 | M&L cleaning of RCC under ground sump of capacity 20000 gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 92 | M&L cleaning of RCC under ground sump of capacity 10000 gallons at Jalipa, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 93 | M&L cleaning of RCC under ground sump of capacity up to 20000 gallons at variousAscone node andJalipa Military station, dewatering the sump with water lifting pump, descaling internal surfaces of under ground sump with wire brush, removing the deposited mud from inside the sump, washing with bleaching powder and flush water two times and dewatering, applying two coats of lime wash inside the sump including writing capacity of tank, date of cleaning with synthetic enamel paint of white tint over black base (size of letter 5mm wide and 15cm in height) complete all as specified and as directed . |
| 94 | Cleaning of overhead tank of capacity 75000 gallons with dewatering the sump, removing the deposited mud from the overhead tank and washing with bleaching powder incuding writing of capacity of tank and synthetic enamal paint of white tint over blace base complete all as specified and directed . Note: ( Cleaning of the tank must be performed with all neccesary measures for safety of working person.) |
| 95 | Cleaning of overhead tank of capacity 60000 gallons with dewatering the sump, removing the deposited mud from the overhead tank and washing with bleaching powder incuding writing of capacity of tank and synthetic enamal paint of white tint over blace base complete all as specified and directed . Note: ( Cleaning of the tank must be performed with all neccesary measures for safety of working person.) |
| 96 | Cleaning of overhead tank of capacity 50000 gallons with dewatering the sump, removing the deposited mud from the overhead tank and washing with bleaching powder incuding writing of capacity of tank and synthetic enamal paint of white tint over blace base complete all as specified and directed . Note: ( Cleaning of the tank must be performed with all neccesary measures for safety of working person.) |
| 97 | Cleaning of overhead tank of capacity 25000 gallons with dewatering the sump, removing the deposited mud from the overhead tank and washing with bleaching powder incuding writing of capacity of tank and synthetic enamal paint of white tint over blace base complete all as specified and directed . Note: ( Cleaning of the tank must be performed with all neccesary measures for safety of working person.) |
| 98 | Material and labour for cleaning of cast iron pipe of Over Head Tanks such as water rising main, wash out, overflow including all fittings job by descaling ,removing mud/descaled material inside the pipes and on the mouth of delivery pipe complete all as specified and directed . |
| 99 | Material and labour for replacement of rusted cover of OH tank/ underground sump entrance way cover made of MS sheet 3mm thick off sizes to suit site requirement. Sheet welded with angle iron frame including one coat of red oxide primer and two coats of black synthetic enamel paint, including grouting arrangement, angle iron frame of 50x50x6 mm complete as all specified and directed. |
| 100 | Taking out for repair unserviceable spindle of cast iron sluice valve from pit /column pipe of150 /100/80 mm dia & carrying to the workshop for cutting,threading, grinding etc & refixing the same after repair complete all as specified & directed . |
| 101 | Material and labour for gland packing with hemp or asbestos packing impregneted with graphite or teflon forsluice valveof 150 / 100 /80 mm diaincluding taking down of old glandpacking complete all as specified and directed . |
| 102 | Supply and fixing in repair check nut suitable for spindle of size 150/100/80 bore all as specified and directed |
| 103 | Demolition of existing old unserviceable brick masonary valve chamber including demolition of unserviceable M.S iron cover and iron frame and M & L for Construction of brick masonry valve pit of size 90cm x 90cm X 90 cm (internal dimensions) with one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 type D2 ( using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 ( using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover 40x40x6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 230x200x100mm incl provn of hinges welded with angle iron frame and MS cover 3mm thick sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in soft/ loose soil complete all as specified and directed. |
| 104 | Supply and fixing in replacement of 40 mm bore gun metal gate valve with iron wheel head, screwed both ends for joining iron pipe , non rising forged brass spindle class I complete all as specified and as directed . |
| 105 | Supply and fixing in replacement of 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for joining iron pipe, non rising forged brass spindle class I complete all as specified and as directed . |
| 106 | Supply and fixing in replacement of 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for joining iron pipe, non rising forged brass spindle class I complete all as specified and as directed . |
| 107 | Supply and fix in repair 100 mm bore Non-return valve (CI Refluxe valve ) flanged joint with bypass arrangement complete with nut, bolts and washer complete all as specified and directed . |
| 108 | Supply and fix in repair 80 mm bore Non-return valve (CI Refluxe valve ) flanged joint with bypass arrangement complete with nut, bolts and washer complete all as specified and directed . |
| 109 | Supply and FixGI flanges suitable for pipe size 100 mm with bolt holes drilled at the same pitch circle dia as existing with new rubber jointsand new GI nuts and bolts if required including removing the existing unserviceable GI flange etc complete all as specified and directed. |
| 110 | Supply and FixGI flanges suitable for pipe size 80 mm with bolt holes drilled at the same pitch circle dia as existing with new rubber jointsand new GI nuts and bolts if required including removing the existing unserviceable GI flange etc complete all as specified and directed. |
| 111 | Taking out unserviceable CI foot valve leather and S&F foot valve lather suitable for 100 mm foot valve complete all as specified and directed . |
| 112 | All as per Srl itemNo 111above but of size 80 mm. |
| 113 | M&L inreplacementof10 sq mm single core multi stranded copper conductor PVC (FRLS)insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Markedall as specified and directed.Make : Havells/Polycab/Finolex. |
| 114 | M&L inreplacementof16 sq mm single core multi stranded copper conductor PVC (FRLS)insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Markedall as specified and directed.Make : Havells/Polycab/Finolex. |
| 115 | Supply and fix in replacement of PVC flexible conduit pipe of size 25 mm dia all as specified and directed. |
| 116 | Supply & fixing in replacement shock treatment chart of size 70cm x 50 cm printed in English & Hindi, framed on all sides with wooden beading and glazing with 3mm thick ordinary glass all as specified and directed. |
| 117 | Supply and fix in replacement First Aid Box of size 36cm x 26cm x13cm for pump house ,wall mounted - multi compartments Red/Green and White Rectangular all as specified and directed. |
| 118 | M&L for PCC foundation of 1:3:6 (nominal mix) type C-2(using 40mm graded crushed stone aggregates) as in foundation filling and mass concreteincluding necessary form work and finishing the exposed surface even and smooth with out using extra cementall as specified and directed at site. |
| 119 | Supply and fix in replacement of pump pressure gauge Glycerin (0 - 6 kg/cm2 ) all as specified and directed. |
| 120 | Supply and fix in replacement of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed. |
