Military Engineer Services-MES has published Repair Maintenance Of Main Distribution Water Supply Lines Cleaning Of Oh And Ug Water Reservoirs Filtration Plant At Mil Stn Palampur And Repair Replacement To Di Water Supply Line Valves At Neugal Khad At Tank A At Palampur Mil Stn . Submission Date for this Tender is 05-10-2022. Reservoir Tenders in palampur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-10-2022 |
| Sl. No. | Item Description |
| 1 | Excavationin trenches, not exceeding 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil, for removing/laying pipes, complete all as specified and directed. |
| 2 | Returning, filling in,(soil) including spreading, levelling, watering and well ramming in layers not exc. 25cm thick in any type of soil,complete all as specified and directed. |
| 3 | Removal of excavated materials (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified anddirected. |
| 4 | Takingup ordownGItubing including all fittings from trenches, wall, floor etc including cleaning for refixing or removing to store forsafe custody or disposal under schedule of credit of size 15 mm bore complete all as specified and directed. Note : (a) Earth work shall be measured & paid under relevant item. |
| 5 | All as per the description of Serial item No. 4 here-in-before but for of size 20 mm bore, complete all as specified and directed. |
| 6 | All as per the description of Serial item No. 4 here-in-before but for of size 25mm bore, complete all as specified and directed. |
| 7 | All as per the description of Serial item No. 4 here-in-before but for of size 32mm bore, complete all as specified and directed. |
| 8 | All as per the description of Serial item No. 4 here-in-before but for of size 40mm bore, complete all as specified and directed. |
| 9 | All as per the description of Serial item No. 4 here-in-before but for of size 50mm bore, complete all as specified and directed. |
| 10 | All as per the description of Serial item No. 4 here-in-before but for of size 80mm bore, complete all as specified and directed. |
| 11 | All as per the description of Serial item No. 4 here-in-before but for of size 100mm bore, complete all as specified and directed. |
| 12 | All as per the description of Serial item No. 4 here-in-before but for of size 150mm bore, complete all as specified and directed. |
| 13 | Dismantling, taking up CI/DI water main 100 mm bore including all fittings with spigot and socket ends / flanged ends including taking out lead jointsand rubber joints from trenches/floor, including cleaning for refixing or removing to store forsafe custody or disposal under schedule of credit complete all as specified and directed. Note: Excavation and earth work shall be measured and paid separately wherver reqd at site. |
| 14 | All as per the description of Serial item No. 13 here-in-before but for of size 150 mm bore, complete all as specified and directed. |
| 15 | All as per the description of Serial item No. 13 here-in-before but for of size 200 mm bore, complete all as specified and directed. |
| 16 | All as per the description of Serial item No. 13 here-in-before but for of size 250 mm bore, complete all as specified and directed. |
| 17 | Dismantling and taking down unserviceable cast iron sluice valve / Non retun valve 65 to 250 mm bore, including cleaning for refixing or removing to store forsafe custody or disposal under schedule of credit complete all as specified and directed. |
| 18 | M&Lgalvanisediron water tubing 15 mm bore,medium grade (ISI marked) with all fittings such as bends, elbows, tees, short pieces, connector with (ISI marked), check nuts, caps, plugs and union etc and laying in trenches/ floor /wall /ceiling as required at site, complete all as specified and directed. Note : (a) Earth work shall be measured & paid under relevant item. (b) The cost of new fitting alongwith cutting, threading as required at site shall be deemed to be included in the rate quoted under this item. |
| 19 | All as per the description of Serial item No. 18 here-in-before but for of size 20 mm bore, complete all as specified and directed. |
| 20 | All as per the description of Serial item No. 18 here-in-before but for of size 25 mm bore, complete all as specified and directed. |
| 21 | All as per the description of Serial item No. 18 here-in-before but for of size 32 mm bore, complete all as specified and directed. |
| 22 | All as per the description of Serial item No. 18 here-in-before but for of size 40 mm bore, complete all as specified and directed. |
| 23 | All as per the description of Serial item No. 18 here-in-before but for of size 50 mm bore, complete all as specified and directed. |
| 24 | All as per the description of Serial item No. 18 here-in-before but for of size 80 mm bore, complete all as specified and directed. |
| 25 | All as per the description of Serial item No. 18 here-in-before but for of size 100 mm bore, complete all as specified and directed. |
| 26 | All as per the description of Serial item No. 18 here-in-before but for of size 150 mm bore, complete all as specified and directed. |
| 27 | M&L Ductile iron pipe (Conforming to IS: 8329) withspigot and socket ends of100mm bore class K-9 suitable for tyton joint including jointing material/ joints laid in trenches complete all asspecified and directed. Note:-cost of tyton joint included in this item |
| 28 | All as per the description of Serial item No. 27 here-in-before but for of size 150 mm bore, complete all as specified and directed. Note:-cost of tyton joint included in this item |
| 29 | All as per the description of Serial item No. 27 here-in-before but for of size 200 mm bore, complete all as specified and directed. Note:-cost of tyton joint included in this item |
| 30 | All as per the description of Serial item No. 27 here-in-before but for of size 250 mm bore, complete all as specified and directed. Note:-cost of tyton joint included in this item |
| 31 | M&LCI/DI fittings any type such as bends (any type radious and angles), reducers ,Tees, Y pieces, collars caps, plugs and straight connecting pieces 100 mm to 150 mm dia complete all as specified and directed. |
| 32 | M&LCI/DI fittings any type such as bends (any type radious and angles), reducers ,Tees, Y pieces, collars caps, plugs and straight connecting pieces 200 mm to 300 mm dia complete all as specified and directed. |
| 33 | S&F Cast iron sluice valve long body type, both ends flanged and drilled,of size 65 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, complete all as specified and directed. |
| 34 | S&F Cast iron non return sluice valve long body type, both ends flanged and drilled,of size 50 mm bore, (ISI marked) conforming to IS-14846-2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, complete all as specified and directed. |
| 35 | S&F Cast iron non return sluice valve long body type, both ends flanged and drilled,of size 65 mm bore, (ISI marked) conforming to IS-14846-2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, complete all as specified and directed. |
| 36 | S&F Cast iron sluice valve long body type, both ends flanged and drilled,of size 80 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc,complete all as specified and directed. |
| 37 | S&F Cast iron sluice valve long body type, both ends flanged and drilled,of size 100 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc,complete all as specified and directed. |
| 38 | S&F Cast iron sluice valve long body type, both ends flanged and drilled,of size 150 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, complete all as specified and directed. |
| 39 | S&F Cast iron sluice valve long body type, both ends flanged and drilled,of size 200 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, complete all as specified and directed. |
| 40 | S&F Cast iron sluice valve long body type, both ends flanged and drilled,of size 200 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, complete all as specified and directed. |
| 41 | Supply and fix in repairs gun metal gate valves with iron wheel head screwed both ends for GI pipeof size 50mm complete all as specified and directed. |
| 42 | Supply and fix in repairs gun metal gate valves with iron wheel head screwed both ends for GI pipeof size 40mm complete all as specified and directed. |
| 43 | Supply and fix in repairs gun metal gate valves with iron wheel head screwed both ends for GI pipeof size 32mm complete all as specified and directed. |
| 44 | Supply and fix in repairs gun metal gate valves with iron wheel head screwed both ends for GI pipeof size 25 mm complete all as specified and directed. |
| 45 | Supply and fix in repairs gun metal gate valves with iron wheel head screwed both ends for GI pipeof size 20 mm complete all as specified and directed. |
| 46 | Supply and fix in repairs gun metal gate valves with iron wheel head screwed both ends for GI pipeof size 15 mm complete all as specified fand directed. |
| 47 | M&L run lead joints for cast iron spigot and socket pipe (water main) and fittings including burning of old lead joint for 100mm bore, complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately. |
| 48 | M&L run lead joints for cast iron spigot and socket pipe (water main) and fittings including burning of old lead joint for 150mm bore, complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately. |
| 49 | M&L run lead joints for cast iron spigot and socket pipe (water main) and fittings including burning of old lead joint for 200mm bore, complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately. |
| 50 | M&L run lead joints for cast iron spigot and socket pipe (water main) and fittings including burning of old lead joint for 250mm bore, complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately. |
| 51 | M&L rubber gasket joint for DI/CI spigot & socket pipe (water main) of size 100mm bore includind taking down old unserviceable rubber gasket complete all as specified and directed. Note : Excavation and earth work shall be measured and paid separately. |
| 52 | M&L rubber gasket joint for DI/CI spigot & socket pipe (water main) of size 150mm boreincludind taking down old unserviceable rubber gasket complete all as specified and directed. Note : Excavation and earth work shall be measured and paid separately. |
| 53 | M&L rubber gasket joint for DI/CI spigot & socket pipe (water main) of size 200mm boreincludind taking down old unserviceable rubber gasket complete all as specified and directed. Note : Excavation and earth work shall be measured and paid separately. |
| 54 | M&L rubber gasket joint for DI/CI spigot & socket pipe (water main) of size 250mm boreincludind taking down old unserviceable rubber gasket complete all as specified and directed. Note : Excavation and earth work shall be measured and paid separately. |
| 55 | Dismantling of existing brick masonry valve pit of any size and type and stacking serviceable materials for issue to contractor on credit and removal of unserviceble materials from site complete all as specified and directed. |
| 56 | M&L brick masonry valve pit of size 90cm X 90cm X 90cm (Internal dimensions of chamber) built in Cement Mortar 1:6, Plain cement concrete, M-10 (Nominal mix) type C-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concreting and including 15mm thick plastering internally with cement mortar 1:6and flush pointing externally as the work proceeds in same mortar and Plain cement concrete, M-15 (Nominal mix), type B-1, (using 20mm graded crushed stone aggregates) as in coping complete.3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40x40x6 mm for cover and 2 foot steps made out of MS 16 mm dia round bars, earth work in any type of soil including removal to a distance not exceeding 50 metre and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 57 | M&L brick masonry valve pit of size 120cm X 120cm X 120cm (Internal dimensions of chamber) built in Cement Mortar 1:6, Plain cement concrete, M-10 (Nominal mix) type C-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concreting and including 15mm thick plastering internally with cement mortar 1:6and flush pointing externally as the work proceeds in same mortar and Plain cement concrete, M-15 (Nominal mix), type B-1, (using 20mm graded crushed stone aggregates) as in coping complete.3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40x40x6 mm for cover and 2 foot steps made out of MS 16 mm dia round bars,, earth work in any type of soil including removal to a distance not exceeding 50 metre and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 58 | M&L walling of random rubble stone masonry uncoarsed, well bonded, bedded and solidly hearted built in cement mortar 1:6 using best local stone including dismantling completed all as specified and directed. |
| 59 | M&L plain cement concrete, M-15 (Nominal mix), type B-2 (1:2:4), (using 40mm graded crushed stone aggregates) as in foundation,padestal, filling and mass concrete including dismantling complete all as specified and directed. |
| 60 | M&L cement plaster in cement mortar (1:4) 15mm thick on fair faces of stone masonry or concrete surface finished even & smooth using exits cement complete all as specified and directed. |
| 61 | Cleaning of Sedimentation tank (appx size - 3.3 m x 3.3 m x 4.10 m (Split into two eqal part-5000 Glns capacity each) at pump house by taking out the mud, silt/sand and other partical (approximately depth 0.50 mtr)by any means from bottom of tank and removing the waste material to a distance not less than 50m and spreading/ levelling complete all as directed, washing and scrubing down of algae/ scales/ dirt/ vegetation and shrubs from the inside walls of tank with wire brush, washing with lime mixed water including applying two coats of white wash on inside walls of tanks after preparation of surface and providing a block of size 90x60cm on external surface of wall with black synthetic enamel paint including writing the same with white paint, complete all as specified and directed by Engr-in-charge for the following :- (i)Capacity of tank ,(ii)Tank cleaned on and (iii) Next due date of cleaning |
| 62 | All as per description of Serial item No. 61 here-in-before but Sedimentation tank (Baffle wall type) of apacaity 1 Lakh Gallon - 02 Nos |
| 63 | All as per description of ser item No.61 here-in-before but clear water (supply tank) Semi UG sump type of apacaity 50000 Gallon for Snow View old quarters. |
| 64 | All as per description of ser item No.61 here-in-before but clear water (supply tank) Semi UG sump type of apacaity 1 Lakh Gallon for filling water into O/H reservoirs of different area. |
| 65 | All as per description of ser item No.61 here-in-before but clear water (supply tank) Semi UG sump type of apacaity 1 Lakh Gallon for for Commander and Bhojpur area |
| 66 | All as per description of ser item No.61 here-in-before but clear water (supply tank) OHR of apacaity 1 Lakh Gallon at 21 Mtr height staging. |
| 67 | All as per description of ser item No.61 here-in-before but clear water (supply tank) OHR of capacity 50000 Gallon at 18 Mtr height staging. |
| 68 | All as per description of ser item No.60 here-in-before but clear water (supply tank) OHR of capacity 25000 Gallon at 18 Mtr height staging. |
| 69 | All as per description of ser item No.61 here-in-before but clear water (supply tank) Semi UG sump type of capacity 50000 Gallon for Inf Bn. |
| 70 | All as per description of ser item No.61 here-in-before but clear water (supply tank) Shed type sump of capacity 26000 Gallon for MH |
| 71 | All as per description of ser item No.61 here-in-before but clear water (supply tank) Shed type sump of capacity 21000 Gallon for Okhaldunga area. |
| 72 | Cleaing of Intake water chamber at Neugal Khad by taking out mud, silt/sand and other waste particles of any depth complete all as directed. |
| 73 | Cleaning of RCC Channel approx size 1.5 m(W) and 0.6m (Depth) from Neugal Head to Lohna village by taking out obstructing water fow materials like sliding mud, stones and boulders due to land sliding and removing the same from the channel at a distance not less than 10 m away from the site complete all as specified and directed. |
| 74 | Supply only alum sulphate best quality from approved chemical manufacturer complete all as specified and directed. |
| 75 | Supply onlycalcium hydrochloride in granual form on 45 kg drum having minimum 65-70% of available chlorine with anti-corrosive and anti scaling properties suitable for human consumption chemical manufacturer complete all as specified and directed. |
| 76 | M&Lrepairing to centrifugal pump set of capacity 30 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, impeller, MS bush, nut & bolts as required for pump set including oiling, greasing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note:- All spare parts required shall be measured and paid separately in respective items |
| 77 | M&Lrepairing to centrifugal pump set of capacity 20 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, impeller, MS bush, nut & bolts as required for pump set including oiling, greasing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note:- All spare parts required shall be measured and paid separately in respective items |
| 78 | M&Lrepairing to centrifugal pump set of capacity 12.5 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, impeller, MS bush, nut & bolts as required for pump set including oiling, greasing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note:- All spare parts required shall be measured and paid separately in respective items |
| 79 | M&Lrepairing to monoblock pump set of capacity 7.50/10 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, MS bush, nut & bolts as required for pump set including oiling, greasing and gland packing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note:- All spare parts required shall be measured and paid separately in respective items |
| 80 | M&Lrepairing to monoblock pump set of capacity 3.0/5.0 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, MS bush, nut & bolts as required for pump set including oiling, greasing and gland packing and re-installing pump & motor set and testing at site, complete all as specified and directed. |
| 81 | M & L taking up/out Submersible pump motor set capacity 12.5 HP, 3 phase from Bore Wellincluding column pipe after disconnecting complete electric connection and transporting to civil workshop for repair/overhauling including stacking column pipe properly at site for reuse complete all as directed. Note:- All spare parts required shall be measured and paid separately in respective items |
| 82 | M & L strip opening of Submersible pump motor set capactiy 12.5 HP and taking out burnt out winding, cleaning of motor rotor and startor with cleaning material. Re-winding of motor with stove enameled copper wire of existing gauge. Replacement of unserviceable parts as required at site. Reassembling of motor duly tested and transporting the same from workshop to work site complete all as specified and directed. Note:- All spare parts required shall be measured and paid separately in respective items |
| 83 | Supply & fix in replacement DOL starter, 3 phase, 415 volts for 3/5 HP electric motor with relay range 4.0 to 10.0 complete all as specified and directed. Make- L&T/Havells/Benlo or equaivalent as approved by GE |
| 84 | Supply & fix in replacement DOL starter, 3 phase, 415 volts for 7.5/10 HP electric motor with relay range 14.0 to 21.0 complete all as specified and directed. Make:- BCH/L&T/Benlo or equaivalent as approved by GE |
| 85 | Supply and fix automatic Star delta starter for 12.5 HPmotor with overload relay of range 10-16 Amps, power contractors ML-1 and suitable capacity timer range , single phase preventerincluding taking down old un-serviceable star delta starter complete all as specified and directed. Make- BCH/L&T/Benlo or equivalent as approved by GE. |
| 86 | Supply and fix wall mounting type panel with automatic Star delta starter suitable for22 KW motor of appropriate size as reqd at site with overload relay of range 20-32 Amps, power contractors of suitable capacity, timer rangeand single phase preventor, ON/OFF switch etc with MCCB 100 Amp, 4 Pole, 25 KA as main switch including taking down old un-serviceable panelcomplete all as specified and directed. Make:- BCH/L&T/Benlo or equivalent as approved by GE. |
| 87 | S&F mechanical joint suitable for 80 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 88 | S&F mechanical joint suitable for 100 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 89 | S&F mechanical joint suitable for 150 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 90 | S&F mechanical joint suitable for 150 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 91 | S&F mechanical joint suitable for 150 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 92 | Supply only Stainless steel coupling of best quality suitable for 30 HP Induction motor shaft as per site including taking out old un-serviceable one complete all as specified and directed |
| 93 | Supply only stainless steel coupling of best quality suitable for 20 HP Inductor motor shaft as per siteincluding taking out old un-serviceable one complete all as specified and directed |
| 94 | Supply only bearing of best quality suitable for 30 HP inductor motor including taking out old un-serviceable one as per site complete all as specified and directed |
| 95 | Supply only bearing of best quality suitable for 20.00 HPmotor and pump as per site complete including taking out old un-serviceable one all as specified and directed |
| 96 | Supply only bearing of best quality suitable for 10/12.5 HPmotor and pump as per site including taking out old un-serviceable one complete all as specified and directed |
| 97 | Supply only bearing of best quality suitable for 5/7.5 HPmotor and pump as per site including taking out old un-serviceable one complete all as specified and directed |
| 98 | Supply only bearing of best quality suitable for 3/5 motor and pump as per site including taking out old un-serviceable one complete all as specified and directed |
| 99 | S&F 150mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 100 | S&F 100mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 101 | S&F 80 mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 102 | S&F 50 mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 103 | S&F 40 mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 104 | S&F 32 mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 105 | S&F 25 mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 106 | S&F 20 mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 107 | S&F 15 mm bore union for GI pipe in trench/above ground including cutting cutting tubing etc as required complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 108 | S&F 20 mm to 15 mm reducer socket for GI pipe in trench/above ground including taking out old un-serviceable one complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 109 | S&F 25 mm to 20 mm reducer socket for GI pipe in trench/above ground including taking out old un-serviceable one complete all as specified and directed. Note:- Excavation and earth work wherver required shall be measured and paid separately. |
| 110 | S&F in replacement ball/float valve high pressure ofPTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm bore GI tubing complete all as specified and directed . |
| 111 | S&F in replacement ball/float valve high pressure ofPTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm bore GI tubing complete all as specified and directed . |
| 112 | S&F in replacement ball/float valve high pressure ofPTMT with epoxy coated aluminium rod and high density plastic ball screwed for 25 mm bore GI tubing complete all as specified and directed . |
| 113 | Supply and fix MS cover of 3.0mm thick sheetwith angle iron frame(50mm x 50mm x 6mm) with hook, hold fast, hinge etc. and painting it with two coat of black paint over acoat of red oxide zinc chrome primer suitable for valve pit size90cm x 90cm x 90 cm including taking out old un-serviceable MS cover of any type and size obtained at site complete all as specified and directed |
| 114 | Supply and fix MS cover of 3.0mm thick sheetwith angle iron frame(50mm x 50mm x 6mm) with hook, hold fast, hinge etc. and painting it with two coat of black paint over acoat of red oxide zinc chrome primer suitable for valve pit size120cm x 120cm x 120 cm including taking out old un-serviceable MS cover of any type and size obtained at site complete all as specified and directed |
| 115 | M&Lpig lead suitable for arresting leakages in CI/GI pipe line coplete all as specified and directed by Engr-in-Charge. Note:- Necessary excavation and earth work wherever required shall be measured and paid separately). |
| 116 | M&L best quality spun yarn for arresting leakages in CI/GI/DI pipe line coplete all as specified and directed by Engr-in-Charge. Note:- Necessary excavation and earth work wherever required shall be measured and paid separately. |
| 117 | S&F submersible flat copper conductor cable 1100 Volts grade, heavy duty of size 4 Sqmm 3 Core including taking out old unserviceable cable of any type and size complete all as specified and directed. |
| 118 | S&F MS ERW column pipe including specials, both ends welded with flange of nominal bore 80 mm including rubber gakets, 4.85 mm wall thickness, 3 metres long including taking up old unsrviceable column pipe complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
