}

Construction Of Munsif Magistrate Quarter At Amini Including Septic Tank Man Hole And Soak Pit Etc Balance Work, amini-Lakshadweep

Public Works Department-PWD has published Construction Of Munsif Magistrate Quarter At Amini Including Septic Tank Man Hole And Soak Pit Etc Balance Work. Submission Date for this Tender is 17-09-2022. Building Work Tenders in amini Lakshadweep. Bidders can get complete Tender details and download the document.




Tender Notice

33826639
Construction Of Munsif Magistrate Quarter At Amini Including Septic Tank Man Hole And Soak Pit Etc Balance Work
Open Tender
Indian
Lakshadweep
amini
17-09-2022

Tender Details

Construction Of Munsif Magistrate Quarter At Amini Including Septic Tank Man Hole And Soak Pit Etc Balance Work

Key Value

Document Fees
INR 500 /-
EMD
INR 93270.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Construction of Musif Magistrate Quarter at Amini (G+1) including septic tank,man hole and soak pit etc (Balance work)
Sl. No. Item Description
1Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift up to 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kind of soil
2Filling with Red mud/quarry waste / Debris /Dismantled materials(including loading / unloading /head load/mechanical transporatation etc) in trenches , pits, plinth, sides of foundation etc in layer not exeeding 20cm in the thick and including compacting each layer by rolling / ramming and watering , all complete as per direction of engineer in charge, lead up to 3 KM.
3Providing and laying cement concrete 1:4:8(1 cement 4 M-sand 8 granit chips) excluding the cost of centering and shuttering and reinforcement for foundation and plinth
4Providing and laying cement concrete 1:5:10(1 cement 5 M-sand 10 granit chips) excluding the cost of centering and shuttering and reinforcement for foundation and plinth
5Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15 degree landings, shelves chajjas, lintel bands plain window sills staircase and spiral staircase up to floor five level excluding cost of centring,shuttering and reinforcement 1:1.5:3 (1 cement 1.5 M Sand3 granite chipps 20mm nominal size)
6Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement :1:1:2 (1 cement: 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
7Centering and shuttering including strutting propping etc and removal of form work Lintel, beams, plinth beams, grider, bressummers and cantilivers
8Centering and shuttering including strutting propping etc and removal of form work Column, piller, piers, abutments, post and struts
9Centering and shuttering including strutting propping etc and removal of form work Stair, (excluding landings) except spiral-staircases.
10Centering and shuttering including strutting propping etc and removal of form work Suspended floor, roofs, landings, balconies and acess platform.
11Cold twisted steel reinforcement for RCC work including bending, binding and placing in position complete.
12Brick work with modular bricks of class designation in foundation and plinth in C.M.1:6 (1Cement: 6 Metal sand)
13Brick work in superstructure above plinth level upto floor five level in cement mortar (1 cement 6 M-sand).
14Half Brick work in superstructure above plinth level upto floor five level in cement mortar (1 cement 4 M sand).
15Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately)
16Providing and fixing 30 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent
17Providing and fixing karimaruthu wood or equivalent 25 mm squre wooden bars at required spacing in wooden frames of windows and clerestory windows
18Providing 40 x5 mm Iron hold fast 40 cm long including fixing to frames with 10 mm dia bolts nuts , wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 ( 1 cement : 3 river sand : 6 graded stone agrigate of 20 mm nominal size)
19Providing and fixing Bright finished brass casement stay with necessary screws . 200 mm weighing not less than 240 gms
20Providing and fixing brass tower bolt (barral type) with necessarysscrews etc complete.
21Brass tower bolt 100x10mm
22Brass tower bolt 250x10mm
23Providing and fixing brass handle with necessarys screws etc complete.
24Brass handlet 125 mm
25Brass handlet 100 mm
26Providing and fixing brass door latch with necessarys screws etc complete. 250x16x5 mm
27Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws.
28Providing and fixing Aluminium curtain rods with Aluminium brackets: 20 mm dia (heavy type)
29Providing and fixing stainless steel (Grade304) railing made of Hollow tubes,channels, plates etc. includingwelding grinding,buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steelbolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc..)
30Providing and fixing 8 mm thick Ist quality ceramicfloor tiles of size 300x300 mm confirming to IS:15622 of approved make, in colours such as White, ivory, Grey, Fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement, 4 metal sand) and joining with white cement and matching pigment etc. complete in floors, treads of steps, landing as per the direction of engineer incharge.
31Providing and fixing 8 mm thick Ist quality ceramic glazed wall tiles confirming to IS:15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3 metal sand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete
32Providing and laying 10 mm thick vitrified floor tiles in different sizes with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved brand and manufacture, in all coulers and shades in floors, landings, treads steps etc. laid with cement based high polymer modifeid quick set tile adhesive ( water based ). (Khajaria polished vitrified tiles or equivalent) Size of tiles 800x800 mm
33Providing and laying 10 mm thick vitrified floor tiles in different sizes with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved brand and manufacture, in all coulers and shades, in skirting , riser of steps, laid with cement based high polymer modifeid quick set tile adhesive ( waterbased ) (Khajaria polished vitrified tiles or equivalent) Size of tiles 800x800 mm
34Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
356mm cement plaster to ceiling 1:3(1cement :3 metal sand)
3612mm cement plaster 1:6 (1cement :6 metal sand)
3715mm cement plaster 1:6 (1cement :6 metal sand) on rough side of single or half brick wall
38Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.Water thinnable cement primer (Berger/ Nerolac/ Asian paint)
39Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. (Nerolac or equivalent).
40Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied with Teflon coated Royal coated) on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm. (Asian Paint or equivalent)
41Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coat
42Painting Wood work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture
43Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)
44a) 20 mm nominal outer dia .Pipes.
45b)32 mm nominal outer dia .Pipes
46Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).
47a) 20 mm nominal outer dia .Pipes.
48b)32 mm nominal outer dia .Pipes
49Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete. 20 mm nominal bore (Cera/ Hindware/ Parryware)
50Providing and fixing C.P. Brass stopcook of approved quality and manufacture complete. 20 mm nominal bore (Cera/ Hindware/ Parryware)
51Providing and fixing C.P. shower rose with 15 to 20mm intlet, 100 mm dia.
52Providing and fixing G.M. full way wheel valve of approvedquality and manufacture complete. .25 mm nominal bore(Shall be replaced with PVC ball valve)
53Providing and placing sintex tank on terrace ( at floor level ) polythene water storage tank ISI : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and over flow pipe but without fittings and the base support for tank. 500 liter capacity
54Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work. 110 mm nominal bore
55Providing anf fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC pan with plastic seat and lid
56Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.
57Providing anf fixing Stailess steel A ISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40 mm ,including painting of fittings and brackets, cutting and making good the walls where required.Kitchen sink with drain board 510x1040 mm bowl deth 250 mm
58Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.
59Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour
60Providing and Fixing PTMT liquid soap container109 mm wide,125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour,weighing not less than 105 gms
61Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi- hambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer incharge. (For W.C. and bathroom door shutter).
62Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-inCharge.
63Providing,laying and P.V.C pipes grade "A" with stiff mixture of 1:3 (1 cemenr 3 metal sand) including testing of joints etc. complete.
64110mm diametre
6590mm diametre
66Providing anf fixing on wall face PVC. soil waste and vent pipe100mm dia pipes
67Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 metal sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm
68Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
69Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.
70Providing and fixing precast cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1 cement :2 fine sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement :3 fine sand) on exposed surfaces including centering and shuttering
71Cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc…complete a) 40mm thick with 20 mm nominal size stone aggregate
72Providing and laying cement concrete 1:5:10 (1 cement : 5 metal sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of pipes including bed concrete as per standard design .100mm dia pipe
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail