Housing Urban and Rular Development Government Departments Closing in 0 days TDR #33820269

Tender For Gangarampur- Hamjapur Road From 1.50 Km To 12.66 Km, Providing And Fixing Of Road Furniture And Metal Crash Barrier, Under Dakshin Dinajpur Highway Division, In The District Of Dakshin Dinajpur ( 3Rd Call ) .

Issued by Government Departments · buniadpur, West Bengal
Tender Value
96.94 Lakhs
Estimated cost
Bid Submission
26 Sep 2022
0 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
buniadpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Gangarampur- Hamjapur Road From 1.50 Km To 12.66 Km, Providing And Fixing Of Road Furniture And Metal Crash Barrier, Under Dakshin Dinajpur Highway Division, In The District Of Dakshin Dinajpur ( 3Rd Call ) .

BOQ

Name of Work:-Mirzapur – Gangarampur – Hamjapur road from 1.50 Km to 12.66 Km, providing and fixing of Road Furniture and Metal Crash barrier, under Dakshin Dinajpur Highway Division, in the District of Dakshin Dinajpur(3rd Call).
Sl. No. Item Description
1Retro-Reflectorised Traffic SignsProviding and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).90 cm equilateral triangle
260 cm circular
380 mm x 60 mm rectangular
460 cm x 45 cm rectangular
590 cm high octagon
6Direction and Place Identification Signs with size more than 0.9 sqm size Board.Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).1200 mm x 900 mm Board
7Road DelineatorsSupplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings.
8Metal Beam Crash BarrierType - A, \"W\" : Metal Beam Crash Barrier Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 andIS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per Clause 811.3 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
9Supplying & fixing of Raised Pavement Markers / Road Studs / Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to clause no 804 of MoRT&H\"s specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sq.cm. on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin basedadhesive as per manufacturer\"s recommendation including site clearance etc. and complete as directed by the Engineer in Charge .The contractor will have to provide a test certificate from a reputable national/international laboratory conforming the above specifications.
10Kilometre StoneReinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.5th kilometre stone (precast)
11Ordinary kilometer stone (precast)
12Hectometer stone (precast)
13R.C. Guard postSupplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mending good damages if any during striking off shuttering, making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect.With Pakur variety stone chips
14Dressing and chilchalling Road flanks including cutting and filling with earth up to 150 mm average thickness finished with outward cross-grade of 1 in 30.(Extra quantity of earth for filling shall be obtained from road side borrow pits.)
15Add GST @ 12%
16Add Labour Welfare Cess @ 1%

AI Tender Summary

OUR REF NO 33820269
AUTHORITY Government Departments
TENDER VALUE 96.94 Lakhs
LAST DATE 26-09-2022
Authority
Authority Name Public Works Department
Work Description Tender For Gangarampur- Hamjapur Road From 1.50 Km To 12.66 Km, Providing And Fixing Of Road Furniture And Metal Crash Barrier, Under Dakshin Dinajpur Highway Division, In The District Of Dakshin Dinajpur ( 3Rd Call ) .
Basic Detail
Tender No WBPWRD/EE/DDHD/NIeT-06/22-23.
Bidding Type Tender
Location
City buniadpur
State West Bengal
Key Dates
Publish Date 06 Sep 2022
Submission Date 26 Sep 2022
Open Date 29 Sep 2022
Finance
Tender Value 96.94 Lakhs
Tender Fee Ref. Documents
EMD 1.93 Lakhs
Exemption Not Available
Document List
ec9e76ca-31aa-4202-a53f-3d1319c241cc.html
BOQ_790197.xls
FORM2911ii.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 06, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 26, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 29, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

ec9e76ca-31aa-4202-a53f-3d1319c241cc.html

xls

BOQ_790197.xls

pdf

FORM2911ii.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders