|
| 1 | PART-I:- Laying & Installation ofOFC systemCutting of cement concrete road for repair/laying of water supply line pipe removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 2 | Cutting of Asphalt road for repair/laying of water supplypipe line removal of debries by Tractor-trolley including,transportation,all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 3 | Mending with Plain cement concrete (1:2:4) with 12mm size crusher broken hard Granite chips including cost of all labour and materials with all taxes,lead,T & P etc all complete. |
| 4 | HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 5 | Supply and Installation of pre-fabricated GRP Joint Box with lid size 600 x 600 x 600 mm for OFC loop and termination as per telecom specification and directions of Site Engineer / Engineer-in-Charge. |
| 6 | OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer. |
| 7 | Supply and Installation of OFC jointing kits as per drawings,specificationsanddirections of Engineer-in-charge/Site Engineer. |
| 8 | Laying HDPE Pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL lubricant etc |
| 9 | PART-II:- Installation of Chlorination SystemProvision for supplytesting & commissioning of chemical feed pump0 to 100m³/Hr in proportion to 4 to 20 mA signal. 100 SPM @ 75 HZ and 67 SPM @ 50 HZ. Motor Frequency Range = 15 to 75 Hz Auto/Manual, Remote, while running or at rest, 5:1 Turn Down Ratio, Over & above there will be provision for manual stroke variation.The Disch piping & fittings starting from the pump flange upto the tank nozzle including VFD 3 Phase input and 415 V 3 Phase output and will have a rating of 3 HP. Inverter will receive a signal of 4 to 20 mA and will vary the RPM of the motor in proportion to the same, thus controlling the pump capacity. Pump will also have the provision for manual stroke adjustment. Connection between the Inverter & pump together with the Instrument for generating 4 to 20 mA signal witheletrical installation etc all complete. |
| 10 | 1set=2 nos dosing pump (1 no working + 1 no standby) |
| 11 | Installation charges including all piping arrangement & hire charges of Hydra etc all complete |
| 12 | Supplying of control panel with VFD for running of the above chlorine dosing pump and motor etc all complete as per direction of Engineer-in-Charge. |
| 13 | Supply, of On line Chlorine Analyser with following technical specification i.e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2\" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system) |
| 14 | Charges for installation, Testing & commissioning ofOn line Chlorine Analyser . |
| 15 | Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity(Prime Power) DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, allAuxiliaries, Exhaust system& silencer, Fuel Tank, Fuel piping , cable of required size , 4 nos earthingfor DG set, required foundation, good quality(L& T or equivalent) , change over,meetering panel, with CT Meter, all complete etc. with inspection certificate from electrical inspector and as as per site condition & direction of Engineer in charge. |
| 16 | 15KVA single phase DG set Disel operated having automatic feeder panel with display controller which can communicate oil level , engine temperature , voltage ,current , battery ,voltage , frequency hour meter , engine oil temp & should be liquid cooled engine . The controller should be fixed on a separate wall with connecting cable up to 15 mtr |
| 17 | PART-III:- Installation of Automation System Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens/Fox) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language including supply,installations of Desk top PC, Modem for receiving data, UPS etc all complete. Including License Key. |
| 18 | Supply, Installation, Testing,Programming, Wiring & CommissioningofPLC panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman)Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based24DI and 16DO EthernetPLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module- 2 Nos having 1ms per channel conversion/sampling time. 4ChAnalog Output module - 2 Nos having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 \"C.10\"\" W touch Panel display having 2 ethernet, Usb host&device 24VDC type- 1 Nos (Make- Siemense ,Schneider-,Allen Bradly).Rated DP Separate DC MCB for Indivisual Modules.. 24dc 1C/O type slim Relay with Led for Digital out put - 16 Nos (make-wago,phoenix contact). 5 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- wago,schneider,siemense,Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router -1 Nos (make- Robustel,Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output- 60. 1.5 mm Terminal block for Digital Output - 40Nos. (Make- wago,Phoenix Contact). 24VDC powered signal isolator for Analog Input - 16 Nos. (Wago,Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos ( Make- Wago,Phoenix Contact,Siemens,Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB- 50 Nos.(Make- Wago,Phoenix Contact,Connectwell),2/4/6 Amp AC/DC MCB- 6nos All switchgear and controlgear make- Siemens,schneider,ABB,L&T.All completed asper electrical specification and as per direction of EIC. |
| 19 | Type 2-1 P+N 15KVA Surge protection device |
| 20 | Supply, Installation, Programming, Testing& Commissioningof1KVA Online UPS with 08Hr Battery Backup System, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Drytype Battery with MS Rack . All completed asper electrical specification and as per direction of EIC. |
| 21 | Supplying all materials,labour,T&P, for fitting of PLC panel as per electrical specification |
| 22 | 1.5 sqmm 8 core armoured cable |
| 23 | 1.5 sqmm 3 core armoured cable |
| 24 | 0.75sqmm 2 core armouredInstrument(Screen cable) |
| 25 | CAT-6 Dlink cable |
| 26 | Cable Gland-25 mm |
| 27 | Cu.logs-1.5/2.5 |
| 28 | Supply, installation of chemical earthing withcrystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all completeas per the site requirement. |
| 29 | Supply of Level indicator to be installed at ESR with following specificationRange=0 to 8mtrType =Radar Power Supply=24V DCOut Put=4-20mAMake=E&H/ABB/VEGA |
| 30 | 4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys. |
| 31 | Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber(Make - Dlink or equivalent) |
| 32 | 24 port fiber optic panel or light interface unit drawout Type |
| 33 | OFC Splicing with pigtails |
| 34 | Configuration of Electro Mechanical Instrument to PLC and Server level with data acquistion at interval of every 5 second including monitoring and command control from remote place |
| 35 | Total No of Instruments |
| 36 | Optical fiber 16-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent |
| 37 | Fiber SFP Multi mode transicever 100 base LC type module |
| 38 | SM(OS2) Duplex Patch cord 3mtr LC-SC,PC type |
| 39 | Fiber Pigtail/patchcord 1 mtr |
