Construction Of Balance Work For 100 Bedded Girls Hostel Buildingat Sohawal Ayodhya
Tender Value
83.34 Lakhs
Estimated cost
Bid Submission
20 Sep 2022
0 days left
EMD
1.66 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sohawal → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Balance Work For 100 Bedded Girls Hostel Buildingat Sohawal Ayodhya
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone ballast 40 mm nominal size) and curing complete, including cost of form- work, in foundation. |
| 2 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. |
| 3 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete |
| 4 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement . |
| 5 | As in item no. 4 above but for slabs (Using 1:1.5:3 Mix concrete) |
| 6 | As in item 4but for thelighterbeams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) |
| 7 | As in item 4 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20. |
| 8 | Providing and laying damp-proof course 25 mm thick with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 13 mm nominal size). And including waterproofing material as directed by the Engineer-in-charge |
| 9 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 10 | B/Workin super-structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. |
| 11 | First Floor |
| 12 | Second Floor |
| 13 | Same as in item no. 12 but in1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 14 | First Floor |
| 15 | Second Floor |
| 16 | Providing and laying damp-proof course 25 mm thick with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 13 mm nominal size). And including waterproofing material as directed by the Engineer-in-charge |
| 17 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 18 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 19 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 sand |
| 20 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6sand |
| 21 | 15mm thick plaster in 1:4 (cement & coarse sand) in plinth. |
| 22 | Making grooves 10 to 12mm wide x 8mm deep in plaster of the walls or in ceiling vertically or horizontally as required. |
| 23 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor). |
| 24 | 20 mm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work. |
| 25 | Supply of glass strips for flooring.35mm wide & 4 mm thick. |
| 26 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade |
| 27 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 28 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 29 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). |
| 30 | Providing & fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 31 | (a) Single leaf |
| 32 | (b) Double leaf |
| 33 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. |
| 34 | Providing & fixing of hold fast for chaukhatsof doors and windows. |
| 35 | Providing & fixing of door / windows grill. |
| 36 | Z-Section steel windows with Openable panels, |
| 37 | excluding Glass panes. |
| 38 | Supply and fixing galvanised mosquito proof heavy quality iron wire guage or expanded metal over windows & includind supply and fixing of C.P. teak wood battens 8cm x 1 cm including supply of necessary screws, all materials, labour, T & P etc. required for proper completion the work. |
| 39 | Angle iron chaukhat (40x40x5) |
| 40 | Fixing of Door, windows / ventilators chaukhats in position. |
| 41 | (a) Door chaukhats |
| 42 | (b) Window chaukhats |
| 43 | (c) Ventilator chaukhats |
| 44 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. |
| 45 | Finishing wall with water proof cement paint of approved quality such as Snowcem, Durocem of required shade on undecorated wall surface to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including curing & cost of all materials labour T&P etc complete. |
| 46 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 47 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
| 48 | (a) 250mm x 16mm |
| 49 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 50 | (a) 250 mm x 10mm |
| 51 | (b) 200 mm x 10mm |
| 52 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 53 | Providing and laying \"brick coba\" 120 mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortarfinised smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono tythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonany Coba with top finised plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, T& P etc complete for proper completion of work. |
| 54 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 55 | Same as item above but on new wood surface. |
| 56 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. |
| 57 | Construction of drain along with apron. |
| 58 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved red lead paint. |
| 59 | Chequerred terrazo tiles 20 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 60 | Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veneering on other side |
| 61 | Providing&layingoflight cinder filling under floor of toilets and other sunken roofs. |
| 62 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 63 | P/F straight Grab bars in stainless steel 32mm dia, 60mm ciearance and 600 mm long |
| 64 | P/F drop down Grab bars in stainless steel 32mm dia. |
| 65 | Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable in P.V.C. conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable as earth wire drawn inside &piano typeswitch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etccomplete in all respects as directed including matching colour wash. |
| 66 | Same as in item no. 1 but for two way light. |
| 67 | Same as in item no. 1 but for fan. and light duty exhaust fan |
| 68 | Same as in item no. 1butfor 5ampplug point with piano type switch & socket etc. |
| 69 | Same as in item no.1 but for call bellwith piano type switch or socket etc. |
| 70 | Supply & fixing of power plugwith15amp 250 volts flush type switch& 3pin 15 amp 250 volts flush type socket in suitable M.S. boxof175 mm * 100mm * 50mmsizewith bakelite sheet cover 3 mm thickfixedwithbrass machine screws & washer |
| 71 | Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugeP.V.C. coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting comple. |
| 72 | 2 x 4 sq. mm.With 1 x 2.5 sq.mm. Earth wire In 20 mm dia conduit. |
| 73 | 2 x 10 sq. mm. With 1 x 6 sq.mm. Earth wireIn 25 mm dia conduit. |
| 74 | 2 x 2.5 sq. mm. With 1 x 1.5 sq.mm. Earth wireIn 20 mm dia conduit. |
| 75 | Supply and laying of heavy duty PVC conduit complete with bend and other accessories as required and 14 S.W.G. fishsteelwireetc. in slab alongwith reinforcementbeforeconcreting and plastering complete in all respects. |
| 76 | 20 mm dia. conduit |
| 77 | 25 mm dia. conduit |
| 78 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.600x480x200 mm. size |
| 79 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followedby two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size |
| 80 | S/F of surface / flush mounting SPN Distribution board without MCB complete in all respects as directed at site by Engineer-in-charge.4 ways TPN (CAT-B) |
| 81 | Supply & fixingof 6/10/16/20/25/32 amp. SP MCB (10 KA) (CAT-B) |
| 82 | Supply Fixing of 63 Amp. 4 Pole Isolator |
| 83 | Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AA) 1x40 Watt. |
| 84 | Supply and fixing of single light wall bracket on matching M.D.F.E.G. Board base etc. complete in all respects. |
| 85 | Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect. |
| 86 | S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in lengthfabricatedfrom 16 SWG M.S. sheet incorporating with10 mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with redoxideand screwingarrangement |
| 87 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. |
| 88 | Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. |
| 89 | Supply & fixing of one number 8 SWG G.I. wire in 15mm dia G.I. Pipe of earthing, laid in ground or in wall duly conceale including the cost of cement, sand, labour, T&P other material required for proper completion of the workbut with one number 8 SWG copper wire. |
| 90 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof mounting panel TPN switch board complete with HRC tube heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall complete of flush type ammeter, volt meter, selector switches for ammeter and volt meter, instrument fuses, current transformer etc.The board shall have suitable capacity electrotype aluminum bus bars as per IS 8623 insulates with heat shrink sleeving and mounted on non-hygroscopic support such as CMC / DMC support with detachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable and boxes, reverse entery boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer - in - Charge. All outgoing switches of 100Amp. and above will be provided with ampere meter current transformers and selector switches and instrument fuses etc.The switches board shall be fabricates with CRCA sheet with minimum thickness of 1.6/2mm.cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.Incoming 100 Amp TPN -1 no.Outgoing63 Amp TPN - 2No. |
| 91 | Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 92 | Supply of Ceiling Fan with motor of A.C. Permanent insulation capacitor rating confirming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated volage 220/240 volts, 50 Hz, 1-ph A.C.the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.-1200mm sweep |
| 93 | Supply of AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting frame and other accessories etc.complete (Make : Bajaj / Crompton / Havells)300 mm sweep 900 rpm |
| 94 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests |
| 95 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI markedblack solid plastic seat and lid |
| 96 | Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fitting and brackets, cutting & making good the walls wherever required .Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap |
| 97 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 98 | 32 mm dia (for wash basin) |
| 99 | 40 mm dia(for sink and urinal) |
| 100 | Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 101 | Providing & fixing viterous china toilet paper holder. |
| 102 | Providing & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS :13983 with C.I. bracketsandstainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required.510 x 1040 bowl depth 250 mm |
| 103 | Providing and fixing shower rose with 15 or 20mm inlet |
| 104 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 105 | Providing & fixing pipes. 100mm dia Pipe |
| 106 | 75mm dia Pipe |
| 107 | Providing & fixing M. S. holder - bat clamps of approved design toPVC Clip embedded in & including cement concrete blocks 10*10*10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size). Including cost of cutting holes&making good the walls etc.For 100 mm dia pipe |
| 108 | For 75 mm dia pipe |
| 109 | Providing & fixing PVC Nahani trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & making good the walls and floors.100 mm linlet&100 mm outlet |
| 110 | 100 mm inlet&75 mm outlet |
| 111 | Providing & fixing coller 100 mm dia |
| 112 | 75 mm dia |
| 113 | Providing & fixing sand bend of required degree with access door insertion rubber washer 3 mm thick, bolts & nuts complete .100 mm dia |
| 114 | 75 mm dia |
| 115 | Providing & fixing plainBend of required degree. |
| 116 | 100 mm dia |
| 117 | 75 mm dia |
| 118 | Providing & fixing heel restBend. |
| 119 | 100 mm dia |
| 120 | 75 mm dia |
| 121 | Providing & fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick bolts & nuts complete. 100 * 100 * 100 mm |
| 122 | 75 * 75 * 75 mm |
| 123 | Providing and fixing to the inlet mouth of rain water pipe PVC grating 15 cm diameter and weighing not less than 440 grams. |
| 124 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110 mm diameter |
| 125 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. 110mm |
| 126 | Providing, fixing G. I. pipes complete with G. I. fittings and clamps includingcuttingandmaking good the walls etc. (internal work) - (Exposed on wall)25mm dia nominal bore |
| 127 | 32mm dia nominal bore |
| 128 | Providing, fixing G. I. pipes complete with G. I. fittings and clamps includingcuttingandmaking good the walls etc (internal work) - Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.15mm dia nominal bore |
| 129 | 20mm dia nominal bore |
| 130 | Painting G. I. pipesand fittingswith synthetic enamel white paint over a ready mixedpriming coat, both of approved qualityfornew work.15mm dia nominal bore |
| 131 | 20mm dia nominal bore |
| 132 | 25mm dia nominal bore |
| 133 | 32mm dia nominal bore |
| 134 | Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end)25 mm nominal bore |
| 135 | 32 mm nominal bore |
| 136 | Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats).20 mm nominal bore |
| 137 | Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions. |
| 138 | Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality |
| 139 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms. |
| 140 | Providing & fixing 15 mm nominal bore C.P. brassstop cock (concealed)of standard designandof approvedmake |
| 141 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality |
| 142 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank1 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbase support for tank.5000 litres capacity |
| 143 | Providing, fixing G. I. pipes complete with all required G. I.fittings including trenching and refilling etc. (external work)25 mm. dia nominal bore |
| 144 | Providing andfillingsandof grading zone V or coarser grade alround the G.I. pipes in external work.25 mm. Diameter pipe |
| 145 | Painting G. I. Pipes & fittings with two coats of anti-corrosive bitumastic paint of approved quality25 mm. Diameter pipe |
| 146 | 2Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end)25 mm nominal bore |
| 147 | Excavating trenches in all kind ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m.Pipes 80 mm to 300 mmdiameter |
| 148 | Providing, layingandjointingglazed stone warepipes grade `A\" withstiff mixture of cement mortar inthe proportion of 1:1 (1cement :1 fine sand) including testing of joints etc complete.150 mm diameter |
| 149 | 100 mm diameter |
| 150 | Providingandlayingcementconcrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 gradded stoneaggregate40 mm nominal size) alround S.W. Pipesincludingbed concrete as per standard design.150 mm diameter S.W.Pipe |
| 151 | 100 mm diameter S.W.Pipe |
| 152 | Constructing brick masonry manholewith F.P.S.bricksin cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4gradestone aggregate 20mm nominal size); foundation concrete 1:4:8 mix(1 cement : 4 coarse sand : 8 gradedstoneaggregate40 mm nominalsize) insideplastering 12 mm thickwith cementmortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and makingchannels incementconcrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat ofneatcement completeasper standard designInside size 90 x 80 cm & 45 cmdeep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not lessthan 38 kg (wt. of cover 23 kg and wt. of frame 15 kg) |
| 153 | Providing and fixing of450 mm long C. P. brass towel railcomplete with C.P. brass brackets |
| 154 | Earth work in excavation |
| 155 | P.C.C. in Foundation (1 :4 :8) |
| 156 | 1st Class B/Win Septic tank (1cement : 4 coarse sand) |
| 157 | R.C.C. work in septic tank (M-20) |
| 158 | M.S. work in R.C.C. |
| 159 | 12 mm thk Plastering inside septic tank 1 cement : 3 coarse sand |
| 160 | Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar. |
| 161 | Providing & fixing soil, wast and vent pipe.75 mm dia sand cost iron S&S pipe. D.S.R. - 17.35.2.1*0.8345 |
| 162 | Providing & fixing sand cost iron terminal guard 75 mm dia. |
| 163 | Providing & fixing C.I. tee at the inlet & outlet of septic tank. |
| 164 | Providing & fixing plane sand cost iron S&S bend of required degree.75 mm |
| 165 | Providing lead caulked joints to sand cost iron/ cetrifugally cast (squn) irons pipes & fitting of dia.75 mm |
| 166 | Supply & fixing of medium quality R.C.C. Manhole coverwith frame complete.HD.-20-Circular shape ,560 int. dia. |
| 167 | M.D.-10- square shape ,450 int. dia. D.S.R.- 19.19.2.1*0.8345 |
| 168 | Constructing circular soak pit 2.5m internal diameter and 3m effective depth including excavation, disposal of surplus earth, refilling it with coarse aggregate and RCC slab on to 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate) with 450mm dia manhole cover and frame complete as required as per the standard design. |
| 169 | External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 2.00 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc .110MM PVC casing pipe 60 m,110MM PVC slotted pipe 20 mt,covering with Nylon mesh for filter.P/ F otheraccessorie i.e.50mm GI pipe 45 mtr.2.5 sqm. Submersible cable with .Drilling for 6\" dia tubewell.& providing filling Pea Gravel with Fixing testing and commissioning of Pumpset with lowering & Electric wiring with starter etc. complete as required. |
| 170 | Providing and laying of Interlocking Concrete Block Pavements having 80 mm thick including leveling and dressing of surface to required level and slope, spreading and moisting 30mm thick local sand on bend, filling joints with local sand etc. for proper completion the work as per drawings |
| 171 | GST extra as per applicable |
AI Tender Summary
Tender Timeline
Sep 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender