Kerala State Electricity Board-KSEB has published 110Kv Substation Meppayur-Construction Of New Toilet Earth Work Excavation Rr And Solid Block Masonry Rcc Plastering Painting Tiling Providing European Water Closet Wash Basin Towel Rod Health Faucet Long Body Tap Soap Dish Mirror Septic Tank Upvc Door Ve. Submission Date for this Tender is 20-09-2022. Toilet Bathroom Tenders in Kozhikode Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, base of column etc. for mass concrete. |
| 3 | Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform |
| 4 | Steel reinforcement for RCC work including strightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe500D or more. |
| 5 | Providing and laying in position specified grade of Reinforced Cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level. 1:1.5:3 (1cement:1.5coarse sand:3 graded stone aggregate 20mm nominal size) |
| 6 | Plastering using 12 mm cement plaster of mix 1 : 4 (1 cement : 4 fine sand) including all cost of materials, labour charges etc. complete |
| 7 | Plastering using 9mm cementof mix 1:3(1cement,3 fine cement) including all cost of materials, labour charges etc.complete |
| 8 | Filling with department earth in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in charge. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and shape, including necessary filling up the gaps at junctions, ie at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading, glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge(Glazing, paneling and dash fasteners to be paid seperately) |
| 11 | For shutters of doors ,windows,ventilators including providing and fixing hinges/pivots and making provision fixing of hinges wherever required including the cost of EPDM rubber/neoprene gasket required (filling shall be paid for seperately)-Polyester Powder coated Aluminum (minimun thickness of polyester powder coating 50 micron) |
| 12 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 13 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm |
| 14 | Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of "H" section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. "U"cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer"s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing and laying ceramic glazed floor tiles of size 300x300mm(thickness to be specified by manufacturer) of Ist quality conforming to IS:15622 of approved make,in all colours, shades except white,ivory,gray,fume red brown,laid on 20mm thick cement mortar 1:4(1 cement 4 coarse sand) including pointing the joints with white cement and matching pigment etc.complete |
| 17 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 18 | Providing and fixing wash basin with C.I brackets,15mm C.P brass pillar taps,32mm C.P brass waste of standard pattern,including painting of fittings and brackets,cutting and making good the walls wherever require:-White vitreous China wash basin size 550x400mm with a pair of 15mm C.P.brass pillar taps. |
| 19 | Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in charge. |
| 20 | Supplying and fixing CP Health Faucet good quality including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge |
| 21 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms:15 mm nominal bore |
| 22 | Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge |
| 23 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 24 | Solid block masory using precast solid blocks(Factory made) of size 40x20x15 or nearest available size conforming to IS 2185 part I of 1979 for super structure upto floor two level with thickness 15cm in CM1:6( 1cement:6 coarse sand) etc.complete |
| 25 | Providing and fixing PVC pipes includingjointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineers-in-charge-110mm dia 4kgf/cm2- |
| 26 | Providing and fixing PVC pipes,fittings including fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Concealed work,including cutting chases and making good the wall etc.20mm pipe 10kgf/cm2 |
| 27 | Providing and fixing mirror of superior glass(of approvedquality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing:-Rectangular shape 453x357mm |
| 28 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipe,including jointing with PVC solvent cement-110 mm dia Vent Cowl |
| 29 | Supplying and fixing 100mm PVC floor trap including all labour charges etc |
| 30 | Providing and fixing PVC pipes includingjointing of pipes with one step PVC solvent cement, trenching, refilling&testing of joints complete as per direction of Engineers-in-charge-63mm dia 6 kgf/cm2- |
| 31 | Supplying and installingPVC Septic Tank - 25 to below 35 flush capacity and connected plumbing works including cost of all materials,labour charges,etc complete. |
| 32 | Finishing walls with Deluxe multi surface paint system for interiors and exteriors using primer as per manufactures specifications -Two or more coat applied on walls @1.25 Ltr/10m2 over and including one coat ofspecial primer applied@0.75 Ltr/10m2) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
