Development Works Construction Of Cycle Stand At Mekliganj Higher Secondary School At Ward No . -7 Mekliganj Municipality.
Tender Value
2.61 Lakhs
Estimated cost
Bid Submission
12 Sep 2022
0 days left
EMD
5225
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mekliganj → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Works Construction Of Cycle Stand At Mekliganj Higher Secondary School At Ward No . -7 Mekliganj Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis ofmeasurement of finished quantity of work) (a) With earth obtained from excavation offoundation. |
| 3 | (A) Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, ramming complete including the cost of supplyof sand. (payment to be made on measurement offinished quantity) (B) Do by fine sand Floor |
| 4 | Supplying and laying Polythene Sheet ( 150 gm / sq.m)over damp proof courseor bellow flooring or roof terraching or in foundation or in foundationtrenches. |
| 5 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation. |
| 6 | Cement concrete (mix 1:3:6) with 30 mmdowngraded shingles excluding shutteringN.B.Variety |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. |
| 8 | 25 mm thickdamp proof course with cement concrete with stone chipd (1:1.5:3) (with graded stone aggregates 10 mm nominal size) and admixture of water proofing compound as per amnufacturer\"s specification followed by two coat of polymer based paint, as directed. |
| 9 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) For works in foundation, basement and uptoroof of ground floor / upto 4m.(i) Tor steel / Mild steel |
| 10 | 125mm thick brick work with 1st class bricks in cement morter(1:4) in ground floor.Wall |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor) (ii) With 4:1 cement mortar (b) 10 mm. thick plaster(ii) With 6:1 cement mortar (b) 15 mm. thick plaster |
| 12 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
| 13 | Artificial stone in floor, dado, staircase etc with cementconcrete (1:2:4) with stone chips, laid in panels as directedwith topping made with ordinary or white cement (asnecessary) and marble dust in proportion (1:2) includingsmooth finishing and rounding off corners including rakingout joints or roughening of concrete surface and applicationof cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour. (ii) 25 mm thk. |
| 14 | M.S. structural works in roof trusses with tubular sectionsconforming to IS: 806-1968 & IS: 1161- 1998 cnnected to oneanother with bracket, gusset cleats as per design, direction ofEngineer-in-charge complete including cutting to requisite size,fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brandconforming to IS:814- 2004, haulage, hoisting and erection allcomplete.The rate includes the cost of rolled steel section, consumables suchas electrodes, gas and hire charge of all tools and plants and labourreqired for the work including all incidental chages such aselectricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structuraltubular memebrs as specified in relevent IS code in finished work.Payment for gusset, bracket, cleat may be made by adding the actualweight of such items with weight of finished structural members. Therates are considered for a height of erection 8 m. / 2nd floor levelfrom the ground. Add 1.5 % extra over the rate for each additionalfloor or 4m. beyond the initial 8 m. or part thereof.i) For trusses spanning up to 12.00 m |
| 15 | Galvanised corrugated iron sheet work (excluding thesupporting frame work) fitted and fixed with 10 mm. dia J orL hook-bolts, limpet and bitumen washers and putty completewith 150 mm. end lap and one corrugation minimum side lap.(Payment to be made on area of finished work)(GCI sheet tobe supplied by contractor) (i) In Roof:- a) With 0.60 mm thick sheet |
| 16 | Galvanised iron sheet ridging fitted with necessary bolts,screws, washers etc complete.(225mm end lapping)(A) 300 mm lapping each way(b) With 0.63 mm sheet |
| 17 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification.Two coats |
| 18 | Add GST @ 12.00% |
| 19 | Add Labour Welfare Cess @ 1.00% |
AI Tender Summary
Tender Timeline
Sep 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender