Military Engineer Services-MES has published 8311-Repairs / Replacement To Joinery, Plumbing, Sanitary Fittings, Water Tanks And Roof Treatment To Certain Bldgs At Inside Ota Under Ge Stm Repairs / Replacement To Joinery, Plumbing, Sanitary Fittings, Water Tanks And Roof Treatment . Submission Date for this Tender is 03-10-2022. Civil Work Tenders in Chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Sep-2022 | Revised-Sch-A-Notes | Other | 26-09-2022 |
| 2 | 26-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-10-2022 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc 1.5 Sqm each including making good disturbed surfaces all as specified and directed. |
| 3 | Taking down shutters of any description n.exc 1 Sqm each all as specified and directed. |
| 4 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each all as specified and directed. |
| 5 | S&F Solid PVC Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening all as specified and directed Note:- i) Existing wall edges will have to be finished properly in cement plaster 1:4 including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. (ii) Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (iii) PCC strip of section 5*5mm will have to be created at bottom incl smooth finish in each door opening. |
| 6 | S&F Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & directed |
| 7 | M&L for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed all as specified and directed. |
| 8 | S&F Factory Made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 9 | M&L for Second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified and directed. |
| 10 | M&L for Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats all as specified and directed. |
| 11 | M&L for Second class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats all as specified and directed. |
| 12 | S&F Sheet glass 4mm thick ordinary quality and glazing with 12mm square beading in squares n.exc 0.5 Sq.m in each pane. |
| 13 | S&F MS work as for hold fasts conforming to Fe 290 Gde-E -165 complete all as specified and directed. |
| 14 | M&L for preparation of surface of steel and iron such as hold fasts of area n.exc 0.10 Sq.m each new or old of any description and girth not otherwise treated with tar or coal tar black paint . |
| 15 | M&L for preparing surfaces of wood and wood based materials new or old of chowkats area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each and treated with tar or coal tar black paint. |
| 16 | S&F Butt hinges 100mm, cold rolled mild steel, medium weight. |
| 17 | All as per item No 16 but fixed in repairs |
| 18 | S&F Butt hinges 100 mm, stainless steel hinges fixed with stainless steel screw with frame |
| 19 | All as per item No 18 but 75 mm size |
| 20 | All as per item No 18 but fixed in repairs |
| 21 | S&F Aluminium anodised barrel tower bolts of extruded section 200 mm size |
| 22 | All as per item No 21 but fixed in repairs |
| 23 | All as per item No 21 but 125mm size. |
| 24 | All as per item No 23 but fixed in repairs |
| 25 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long |
| 26 | All as per item No 25 but fixed in repairs |
| 27 | All as per item No 25 but 125 mm size. |
| 28 | All as per item No 27 but fixed in repairs |
| 29 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 30 | All as per item No 29 but fixed in repairs |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 Sqm. |
| 32 | S&F Sheet glass 5.5 mm thick ordinary quality and glazing with 12 mm square beading in squares exc 0.5 Sq.m in each pane. |
| 33 | S&F 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete fixed in repairs |
| 34 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 35 | S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 36 | Taking down shutter of any description n. exc 1 Sqm each and refixing in the same opening with necessary repairs all as specified. |
| 37 | Taking down shutter of any description exc 1 Sqm and n. exc 2 Sqm each and refixing in the same opening with necessary repairs all as specified. |
| 38 | Dismantling boarding any description fixed in any position with nails |
| 39 | S&F 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 40 | Cutting holes in brick walls exc half brick n.exc one brick, built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 as required |
| 41 | S&F 125mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 42 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 43 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified. |
| 44 | S&F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing exc 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting, necessary bearing wheels and switch locking arrangement complete all as specified. |
| 45 | S&F 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium sections as in partition and doors. |
| 46 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 47 | S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg. |
| 48 | S&F in repairs mortice lock vertical type size 100mm brass all as specified |
| 49 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 50 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe- 290 (Gde E- 165) |
| 51 | S&F mild steel black plain sheet 1.25 mm thick but in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. |
| 52 | Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 53 | M&L for plain fillets square rectangular or triangular in section clean sawn secured with nails or brads 2nd class hard wood sectional area exc 3 and n exc 6 sqm |
| 54 | S&F in repairs gate and shutter, hooks and eyes 125mm, Aluminium plate type - II, |
| 55 | S&F Boarding, 20 mm thick 2nd class hard wood ,supplied & fixed with nails in any situation (except flooring and skirting) with butt joints as in cup board shelves |
| 56 | Supply and Fixing of vertical blinds as in curtains of windows and doors, including aluminium track boxes and necessary fittings all as specified and directed. |
| 57 | Taking down steel tubing and connections including all fittings as in 15mm dia tubes. |
| 58 | Taking down steel tubing and connections including all fittings as in 20mm dia tubes. |
| 59 | M&L for 15mm dia tubes, "medium" grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 60 | M&L for 20mm dia tubes, "medium" grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 61 | S&F in repairs triple layered rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical, vertical with closed top) hoisted and fixed in position including proper fixing arrangements and taking down all as specified |
| 62 | S&F in repairs triple layered rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical, vertical with closed top) hoisted and fixed in position including proper fixing arrangements and taking down all as specified |
| 63 | Ball valves 25mmhigh pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms) |
| 64 | Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms) |
| 65 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe |
| 66 | S&F in repairs 25mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe |
| 67 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers |
| 68 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400 mm incl. brackets |
| 69 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with plastic water closet seat, white, closed pattern with bottom, and cover and MS CP or aluminium hinging device |
| 70 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor |
| 71 | S&F vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement |
| 72 | S&F in repairs PVC, syphonic action type, flushing cistern, low level, white, 10 lirs, with inlet ball valve, float, handle and flush pipe incl. brackets |
| 73 | S&F in repairs CP shower rose with or without swivel joints 125 mm size |
| 74 | S&F in repairs Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15mm bore all as specified. |
| 75 | S&F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15mm bore. |
| 76 | Supply and fix chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type all as specified. |
| 77 | S&F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromiumplated screweddown for iron pipeor for brass ferrule fixed. |
| 78 | S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device. |
| 79 | S&F in repairs Pillar taps CP cast copper alloy fancy type with capstan heads, chromium plated, screwed down, high pressure with or without lettered Hot or coldwithlong screwed shanks and fly nuts, screwed for iron pipe 15mm bore. |
| 80 | S&F in repairs PVC connection 15mm size 450mm long with brass nuts on either sides |
| 81 | S&F Bath room PVC cabinet mirror of size 350mm x 450mm(Make: Prayag Cat part No 551 or equivalent make as listed in PS) |
| 82 | S&F 25mm dia stainless steel decorative fancy type curtain rods in repairs including brackets all as directed |
| 83 | S&F stainless steel decorative fancy type end knob for 25mm curtain rods in repairs all as directed |
| 84 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings. |
| 85 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 86 | S&F steel work in trusses, purlins, distance pieces includingspecial shaped washer etc complete using ERW or induction butt welded tube confirming to IS 1161- 1979 grade E S-240. |
| 87 | S&F 4.0mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane and fixed to aluminium frames using rubber packing including hacking out old broken glass all as specified |
| 88 | S&F in repairs 150mm Double action spring hinges for door shutters, mild steel with steel wire spring, stove enamelled, black |
| 89 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 25 mm thick including screed bed of 15mm thick in CM 1:6 |
| 90 | Removing the existing roof treatment of any description completely and remove all the debris from site and rubbish off the premises complete all as directed. |
| 91 | M&L for cement screed bed 20mm thick in CM 1:4 with using 3% of waterproofing compound by weight of cement. Note: water proofing compound measured and paid separately. |
| 92 | Supply only integral liquid water proofing compound. |
| 93 | M&L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.80 Kg/Sqm reinforced with non woven polyester matt black finished over compatible primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over the membrane. The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures : IWL India Ltd/ SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/ STP/ Tiki Tar Danosa (India) Pvt Ltd (TIKIDAN). Note : The work shall be carried out be authorised applicators of manufactures only |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
