Supply And Fixing Of Furniture For Commercial Tax Office Building Kota DEPUTY COMMISIONER TABLE(With Veneer & PU Polish :- Table With Pedestal, Side Unit & Back Unit: The main desk is provided with thewire management system. The Main table shall be of siz, kota-Rajasthan

Supply And Fixing Of Furniture For Commercial Tax Office Building Kota DEPUTY COMMISIONER TABLE(With Veneer & PU Polish :- Table With Pedestal, Side Unit & Back Unit: The main desk is provided with thewire management system. The Main table shall be of size: 2400 Width mm x 1200mm Depth x 750 mm height. Top surface of the table shall made up of 50mm thick MDF board duly finished with Veneer and final coating of PU high gloss. The Maindesk should contain in Smart Case - space slides effortlessly in style. Side panel made up of 50mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Modesty made up of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. The mobile Pedestal shall be of size:480Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be made of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Side unit of Size: 1800 Width mm x 540 Depth mm x 750. The side unit Top surface shall made up of 50mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Modesty, side panel & under structure made up of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. The Back unit of size: 1500 mm width x 450 mm Depth x 1800 mm height. The back unit shall be made up of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Main desk , pedestal, side unit & back unit should be provided with all necessary hardware & fittings etc. .( rates including all taxes) 2 DEPUTY COMMISIONER TABLE:- Table With Pedestal, Side Unit & Back Unit: The main desk is provided with the wire management system. The Main table shall be of size: 2400 Width mm x 1200mm Depth x 750 mm height. Top surface of the table shall made up of 50mm thick prelaminated MDF board . The Maindesk should contain in Smart Case - space slides effortlessly in style. Side panel made up of 50mm thick prelaminated MDF board duly finished. Modesty made up of 18mm thickprelaminated MDF board duly finished. The mobile Pedestal shall be of size :480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall bemadeof 18mm thick pre laminated MDF board duly finishedSide unit of Size: 1800 Width mm x 540 Depth mm x 750. The side unit Topsurface shall made up of 50mm thick prelaminatedMDF board duly finished . Modesty, side panel & understructure made up of 18mmthick prelaminated MDF board duly finished . The Back unit of size: 1500 mm width x 450 mm Depth x 1800 mm height. The back unit shall be made up of 18mm thick prelaminatedMDF board duly finished . Main desk , pedestal, side unit & back unitshould be providedwith all necessary hardware & fittings etc.( Rates including all taxes) 3 CTO ROOM TABLETable with Pedestal & Sideunit : The main desk is provided with the wire management system.The Main table shall be of size: 2100 Width mm x 1000 mm Depth x 750 mm height. Top surface of the table shall made up of 36 mm thick pre laminated MDF board duly finished. The Main desk should contain in Smart Case - space slides effortlessly in style. Side panel madeup of 36mm thick prelaminatedMDF board duly finished. Modesty made up of 18mm thick prelaminatedMDF board duly finished .The mobile Pedestal shall be of size: 480 Width mm x640 Depth mm x 600 Height mm. Mobile pedestal shall be made of 18mm thick pre laminated MDF board duly finished .Side unit ofSize: 1500 Width mm x 450 Depth mm x 750. The side unit Top surface shall made up of 36 mm thick pre laminated MDF board duly finished . Modesty, side panel & understructure made up of 18mm thick pre laminated MDF board duly finished( rates including all taxes) 4 ACTO/ PA ROOM TABLE :- Table With Pedestal & Side Unit : Table Size-1800 (W) X 900 (D) X 750 (H) mm .Table top made of 25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 0.6mm thick Backing Laminate.-Flat edge duly sealed with 2mm thick PVC Beading. Modesty panel & Side panel made of 18mm thick PreLaminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine withcorner rounding function. Glide screws is provided at the bottom of the legs for level adjustment. Grommets (cut outs) is provided on table top for cabling. Grommets is provided with PVC cover.The three drawer unitsize-680(H)x400(W)x450(D).Mobile pedestals is placed below table top. Mobile pedestals made of 18mm thick Pre laminated Particle board. The sides of drawers and facia made of 18mm thickpre laminated Particle Board. Back of the pedestal made of 9mm Pre laminatedParticle Board. Pedestal stand-alone and not supported to the table top. Pedestals have 3 drawer 2 for personal and 1 for lateral files.Drawers are provided with single extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system, SS handles and four number poly-propylene castorsis provided with the pedestal.Side Unit Size-900(W)X450(D)X750(H) mm. Table top made of 25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 0.6mm thick Backing Laminate.-Flat edge duly sealed with 2mm thick PVC Beading. Modesty panel& Side panel made of 18mm thick Pre Laminated Particle Board. All exposed edgesare sealed with 2mm PVC edge beading.The side shutter and shelves are made of 18mm thick Pre Laminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. The back is made of 18mm thick Pre Laminated Particle Board. Each unit have lockable double door is fitted with hinges. Each unit have one numbers of adjustable shelves.Skirting is made of 18mm thick PreLaminated Particle Board.All exposed edges are sealed with 2 mm PVC edge beading. (including all taxes) 5 STAFF WORK STATION LINEAR WORKSTATION :-1200x750mm :Providing andFixing Panel based Modular Workstations of 45 mm thickness with extruded aluminum end post of size 45x23mm. Top trim is of aluminum section of size 45x13.7mm and snap fitted on its base of size 45x 28.4mm. The aluminum framework is supported on lower and upper partition block.Bottom Block is made up of 9mm pre-laminated particle board of desired shade which is pasted on thick particle board batten frame, which is properly screwed to end post and bottom electrical race way.Upper block is fixed above the table top and is made up of particle battens fixed with 12 mm thick pin boardand cloth of desired shade, Optionally White Boardcan be provided instead of pin board.Raceway- one bottom raceway is provided as standard for drawing wires along the width of panel , additional raceways can be added in the middle of the partition and both above and below the table top.The raceway is covered with 100 mm wide aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip of size 86.2x34.3mmConnectors- complete system is interconnected with panels in desired layout with the help of 2-way, 3-way, 4-way fittings and aluminum covers.TABLE TOPS- table tops to be made up of 25mm thick pre-laminated particle board. Exposed edges are covered with 2mm thick PVC edging applied on automatic machine with hot melt glue .The tops are supported on partition with the help of metal brackets.GABLE END- gable end is made up of 18mm pre-laminated particleboard of desired shade and screwed to top with help of metal L brackets.DRAWER UNIT- drawer unit to be made up of 18mm thick pre-laminated particle board for outer Frame .Internal 3 drawers to be made up of 18mm thick pre-laminated particle board with 9mm pre-laminated bottom. Drawer will run on bottom-mounted channels. All 3 drawers are locked with center lock. KEY BOARD TRAY-The keyboard trays are made out of 18mm PLPB under the worktop with sliding channels. Trays are also available in CRCA and PVC material.CPU TROLLY - The CPU Trolleys are made out of powder coated MS sheet with adjustable width, front & back open & provided with front 2 lockable castors to ease out the wire accessibility from the CPU.All complete as per guiding image, specifications and in working conditions to the satisfaction of Engineer-in-charge. (Rate including all taxes) 6 CONFRENCE TABLEConference Table: Size: 30000 (L) x 680(W) x 750(H) mm. With Wire Manager. The top shall be 37 mm thick (18 mm mdf + 18 mm mdf + 0.6 mm laminate + 0.4 mm Membrane ) Edge Profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom. In Understructure the Legs shall be made from 25 mm plain MDF having a straight profile with half round edges and with 0.6 mm thick post Forming laminate . Overall thickness of leg shall be 26.2 mm .The modesty panel in understructure shall be made from pre-laminated MDF boards of 18 mm thick with 2mm thick PVC edge beading on all sides. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. There shall be Wire Management wire carrier shall be made from 0.6 mm thick CRCA powder coated and carrier cover shall be made of 12 mm thick MDF painted all over.Cutting of Sheet Should be done on NC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stove enamellings to remove grease,rust, scale and any other foreign element before Powder coating. The minimum thickness of powder coated should be 40-50 microns. ( Rate Including All Taxes) 7 CenterTable : The dimension of the table shall be (L) 1200 mm x (W) 600 mm x (H) 450mm, the material of the top shall be plywood with VENEER 18mm thick .The table support to be made of teak wood of size-55x22mm.CenterTable Leg to be made of teak wood of size- 50x50mm & should be PU polished.(rates including all taxes) 8 SQUARE TABLE Corner Table: The dimension of the table shall be (L) 600 mm x (W) 600 mm x (H)450mm, the material of the top shall be plywood with VENEER 18mm thick .The table support to be made of teak wood of size-55x22mm.CenterTable Leg to be made of teak wood of size- 50x50mm & should be PU polished.(rates including all taxes) 9 LIBRARY TABLE :-7500 X 1300X750mm Tableare made of pre laminated particle board. Tops are made of 45 mm effect with full compact half moon T molding. Tops with Melamine finish in Rosewood. Melamine finish provides water, heat & scratch resistant. Sides are made of 25 mm with full compact PVC edging. Sides with Melamine finish in grey. Fronts are made of 25 mm with full compact PVC edging. Table front with Melamine finish in Rosewood. All the components are assemble by the imported lock. .(rates including all taxes) 10 COMPUTER TABLE :- Office Table With Three Drawer & Key board : Over all size-1200(W)X600(D)X750(h) in mm. Table top made of 18 mm pre-laminated particle board with 2mm thick PVC edge beading on all sides. The modesty panel and sidepanel made of 18mm thickPre Laminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. 3 drawer unit and Key board tray made of 18mm thick Pre Laminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. Glide screws is provided at the bottom of the legs for level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVc cover. (Including All taxes) 11 DEPUTY COMMISIONER CHAIR :- HighBackChair:The back & seat is made up of 1.2 cm. thick hot pressed plywood up holstered with leatherite and moulded Polyurethane Foam. The backfoam is designed with contoured lumber support for extra comfort.Back Size:52.0cm.(W) X 85.0cm.(H) SEAT SIZE: 52.0cm.(W) X 51.0cm.(D).The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20+/-2 for25% compression. SEAT-BACK CONNECTING SPINE: The seat and back are arrested together with a 9.0cm (w) spine made of 0.8cm thick. HR steel. Cutting of Sheet Should be done on CNC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending. The spine is black powder-coated. ARMREST ASSY: The armrest assy.comprises of three parts viz. the armrest support tube and P.U. armrest and thearmrest top. The armrest tube assy. is made of 2.54cm(1) x 16 BG. M.S. E.R.W.support tubes and Chrome plated. The P.U. armrest is made of black integral skin polyurethane with 50-70 shore A Hardness and reinforced with M.S. insert. The arm rest top is made of ABC & upholstered with foam & pure leather. The mechanism of the chair shall have following features : 360° revolving type, Knee Tilt system, 5-position locking with antilock back mechanism. Tilt tension adjustment and position locking with anti-shock back mechanism,which prevents the back rest from impacting the user when the lock is released. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0+/-0.3 cm. The pedestal shall be made of die-cast polished aluminum it shall be fitted with 5 nos.twin wheel castor. The size of the pedestal shall be 62.0 +/- 1.0 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded inblack nylon. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth ofChair - 70.0 cm as measured from pedestal below with castor. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust,scale and any other foreign element before Powde rcoating. The minimum thickness of powder coated should be 40-50 microns. ( Rates including All taxes) 12 DEPUTY COMMISIONER VISITOR CHAIR :-Visitor Chair: The back & seat is made up of 1.2 cm. thick hot pressed ply wood up holstered with leatherite and moulded Polyurethane Foam. The back foam is designed with contoured lumber support for extra comfort. Back Size: 48.0cm.(W) X65.0 cm. (H) SEAT SIZE : 48.0 cm. (W) X 48.0 cm. (D).The poly urethane foam is moulded with density = 45+/-2kg/m 3 and Hardness=20+/-2 for25% compression. SEAT-BACK CONNECTING SPINE: The seat and back are arrested together with a 9.0cm (w) spine made of 0.8cm thick. HR steel. Cutting of Sheet Should be done on CNC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending.The spine is black powder-coated. The tubular frame is cantilever type & made of 4.0cm x 2.0cmx 0.2cm.thk M.S. E.R.W tube .Bending of Tube Should bedone on CNC operated machine to ensure accuracy of bending of tube. All themetal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust, scale and any other foreign element before Powder coating. The minimum thickness of powder coated should be 40-50microns( Rates including All taxes) 13 CTO/ACTO CHAIR :- Mid Back Chair The cushioned seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric.the insert moulded foamis assembeled overa load bearing plastic seat cover. The back made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. Size of back (W)-48.5cm, (H)-62.0cm & size of seat (W)-51.0cm x (D)-52.5cm. Armrest are injection moulded with height adjustable up to 4.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket made of Aluminium die cast piece connecting back with mechanism. The chair is provided with pneumatic height adjustment which shall have stroke of 10.0cm.The pedestal made of die-cast polished aluminium. it fitted with 5 nos twin wheel castor. The size of the pedestal 62.0cm pitch-centre-dia (70.0cm with castors).The twin wheel castors are injection moulded in black nylon( Rates including All taxes) 14 CTO/ACTO Visitor Chair: The cushioned seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric.the insert moulded foam is assembeled over a load bearing plastic seat cover. The back made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. Size of back (W)-48.5cm, (H)-62.0cm & size of seat (W)-51.0cm x (D)-52.5cm. The sled base leg frame welded assembly made from MS ERW round tube of 25mm with 2mm thick with base plate for seat fixing. Bending of Tube Should be done on CNC operated machine to ensure accuracy of bending of tube.Visitor Chair frame is chrome coated. ( Rates including All taxes) 15 PA/COMPUTER CHAIR :- High Back Chair : The seat and back are made up of 1.2 cm thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam with PVC lipping all around.The back foam is designed with contoured lumber support for extra comfort. Back foam size 470(W) x720(H) mm. seat foam size 480(W)x 465(D)mm.The one piece armrest made of black integral skin polyurethane with 50-70shore ‘A’ hardness and reinforced with M.S. insert. The armrests are fitted to theseat with seat/armrest connecting strip assembly made of 0.6cm thick. HR steel.Cutting of Sheet Should be done on NC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending.The center tilt mechanism shall be designed as-360°revolving type,17°±2°maximum tilt on pivotat center, Up right position locking, Tilt tension adjustment. The pneumatic height adjustment have an adjustment stroke of 12.0cm.TheTelescopic bellow as:-The bellow is 3 piece telescopic type and injection molded in black polypropylene .The pedestal is injection molded in black 30% glass filled Nylon. A 10.5 dia forged bright zine plated M.S. caster pinpress-fitted into each prong for holding the castors. The pedestal shall be 700 mm pitch-centre- dia. (750 mm with castors).The twin wheel casters are made of nylon .Overall Dimensions of Chair as measured from pedestal - Width-75. cm and Depth-75.0cm. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust, scale and any other foreign element before Powder coating. The minimum thickness of powder coated should be 40-50microns. (Rates including All Taxes) 16 CONFERENCE CHAIR :-CHAIR REVOLVING CHAIRof size ( H 1280 X D 650 ) is made up of is made up of 13.5 MM thick hot pressed plywood upholstered with Leatherette and Polyurethane Foam (HD FOAM) and the back is made up 12 MM. thick hot pressed plywood upholstered with Leatherette and molded polyurethane foam (HD FOAM) with theback ply and foam is designed to provide maximum lumber support for comfortable seating posture. The baseseat is of size ( W 520 x D 420 x T 110 ) and back seat of size( W 520 x D 600 x T 100 ). (Rates including All Taxes) 17 COMPUTER CHAIR :- Mid Back Chair: seat & back made of 12mm thick hot pressed plywood, with fabric and moulded polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. Back foam size 500(W) x490(H) mm. seat foam size 500(W)x 465(D) mm. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. Theone piece armrest made of black integral skin polyurethane with 50-70 shore ‘A’hardness and reinforced with M.S. insert. The armrests are scratch and weatherresistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.6cm thick. HR steel. Cutting of Sheet Should be done on CNC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending.The center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivotat center, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. The Telescopic bellow as:-The bellow is 3 piece telescopic type and injection molded in black polypropylene.The pedestal is injection molded in black 30% glass filled Nylon .A10.5 dia forged bright zine plated M.S. caster pin shall be press-fitted into eachprong for holding the castors. The pedestal shall be 700 mm pitch-centre-dia. (750mm with castors).The twin wheel casters are made of nylon. Overall Dimensions of Chair as measured from pedestal - Width-75. cm and Depth-75.0cm. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust,scale and any other foreign element beforePowder coating.The minimum thickness of powder coated should be 40-50microns. (Rates including All Taxes) 18 PUBLIC SEATING DESK :- Providing & Fixing 3 Seater Metal Perfo waiting chairs with 600mm x 1800mm x 800mm arms Fb/Perforated seat and back for L 3CH UP. Powder coated perforated steel seat and back. Chrome plated steel base and armrest with upholstered cushion back and seat. (Rates including All Taxes) 19 2 SEATER SOFA :- Providing and fixing in position sofa Size: 1500mm (W)x 650mm (D) x 720 mm (H) x 390 mm (SH)Providing frame of size 75x75 mm, the structure to be in teak wood frame, for seat, back and arms with 9mm thick BWR ply (710 grade) cladding for façade, side and back or as mentioned in the drawing with reqd. hardware as per drawing.All the surfaces of the ply and wood shall include providing and applying two coats of fire retardant paint and wood preservative paint. The seat, back and arm rest to be in 50 grade High density polyutherene form covered with recron polyfill for softer seating comfort and half Natural Italian leather of approve make and thickness.Legs to be provided with rubber/PVC shoes. HD U foam including making round edge etc with approved cloth upholstery of Rs.1250/mtras per detail design & drawings.All exposed surfaces to be duly melamine polished of approved shade. (Rates including All Taxes) 20 SOFA SET 5 SEATER (3 +2) :- Sofa 3+1+1: Size of 1 seater sofa shall be 1010 (L) 920 mm (W) 950 (H) seating area length 560 mm & seating area width 510mm. Size of 3 seater sofa shall be1960 (L) 920 mm (W) 950 (H) seating area length 1520 mm & seating area width 510mm. The frame material to be tropical wood + pine wood, Length of S-spring to be 510 mm, width of belt to be 40mm. There should be pocket on each side of sofa. The seat foam & back foam density to be 40kg/m3 up holstered with leatherette. The material for handle and leg to be wood and should be polish. (Rates including All Taxes) 21 FILE UNIT :- Open File Unit : Overall size-1050(W)X450(D)X750(H) in mm. The open file unit made of 18 mm pre-laminated particle board with 2mm thick PVC edge beading on all sides. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function.Glide screws is provided at the bottom of the legs for level adjustment. (Rates including All Taxes) 22 SS DINNING TABLE WITH 6 CHAIR FOR CANTEEN :- Dinning Table: Table Providing & placing dinning table of Stainless steel grade 202 of size 1800mmW x 900mm D x 750mm H. Understructure to be made up of 40x40x1.2mm thick. SS hollow pipes with foot rest at the height of 75mm. Two loop legs with table top frame & added middle horizontal support (along the width in top frame for 1800W). Top & understructure should be welded. Complete base structure to be in welded construction. Provision for levellers should be given for adjusting height if required. Dinning Chair : Shall be Tubular MS chrome plated 25diameter, 1.6 mm thickness with leg reinforcement and 12mm thick polymoulded for seat at 450mm H and diameter of seat shall be 400 mm. 23 NEWSPAPER STAND : Providing and placing newspaper stand of size 900 x 400 x 900 made with fully welded steel construction rigid but light in weight and the powder coated finishthree side is coverd with 22 g steel sheet, round pipe of 25mm 18 gauge and heavy duty 75mm nylon castors for easy moment (Rates including All Taxes) 24 PODIUM :-Overall dimension shall be H 1200 x W 750/600 x D 450mm.Podium shall be made of 18mm thick MDF board ISI marked. The podium shall be post formed. The base shall be of 25mm commercial ply ISI marked. Laminate shall be used 0.6 for post form. One shelf shall be provided below the top. The self shall be mounted on telescopic channels. Bottom shelf shall be 70mm above base. The base shall be fixed on post form strips of 150mm width.The edge banding shall be done by 2mm thick PVC tape by hot pressed machine of Matching colour. The overall appearance of the product shall be as per photograph (Rates including All Taxes)

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	15-Sep-2022	PRE BID MEETING DOCUMENT	Technical Bid	20-09-2022

INR 2000 /-

INR 534000.0 /-

INR 2.67 Crore /-

Name of work :- SUPPLY OF FURNITURE FOR COMMERCIAL TAX OFFICE BUILDING KOTA

Sl. No.	Item Description
1	DEPUTY COMMISIONER TABLE(With Veneer & PU Polish :- Table With Pedestal, Side Unit & Back Unit: The main desk is provided with thewire management system. The Main table shall be of size: 2400 Width mm x 1200mm Depth x 750 mm height. Top surface of the table shall made up of 50mm thick MDF board duly finished with Veneer and final coating of PU high gloss. The Maindesk should contain in Smart Case - space slides effortlessly in style. Side panel made up of 50mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Modesty made up of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. The mobile Pedestal shall be of size:480Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be made of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Side unit of Size: 1800 Width mm x 540 Depth mm x 750. The side unit Top surface shall made up of 50mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Modesty, side panel & under structure made up of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. The Back unit of size: 1500 mm width x 450 mm Depth x 1800 mm height. The back unit shall be made up of 18mm thick MDF board duly finished with Veneer and final coating of PU high gloss. Main desk , pedestal, side unit & back unit should be provided with all necessary hardware & fittings etc. .( rates including all taxes)
2	DEPUTY COMMISIONER TABLE:- Table With Pedestal, Side Unit & Back Unit: The main desk is provided with the wire management system. The Main table shall be of size: 2400 Width mm x 1200mm Depth x 750 mm height. Top surface of the table shall made up of 50mm thick prelaminated MDF board . The Maindesk should contain in Smart Case - space slides effortlessly in style. Side panel made up of 50mm thick prelaminated MDF board duly finished. Modesty made up of 18mm thickprelaminated MDF board duly finished. The mobile Pedestal shall be of size :480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall bemadeof 18mm thick pre laminated MDF board duly finishedSide unit of Size: 1800 Width mm x 540 Depth mm x 750. The side unit Topsurface shall made up of 50mm thick prelaminatedMDF board duly finished . Modesty, side panel & understructure made up of 18mmthick prelaminated MDF board duly finished . The Back unit of size: 1500 mm width x 450 mm Depth x 1800 mm height. The back unit shall be made up of 18mm thick prelaminatedMDF board duly finished . Main desk , pedestal, side unit & back unitshould be providedwith all necessary hardware & fittings etc.( Rates including all taxes)
3	CTO ROOM TABLETable with Pedestal & Sideunit : The main desk is provided with the wire management system.The Main table shall be of size: 2100 Width mm x 1000 mm Depth x 750 mm height. Top surface of the table shall made up of 36 mm thick pre laminated MDF board duly finished. The Main desk should contain in Smart Case - space slides effortlessly in style. Side panel madeup of 36mm thick prelaminatedMDF board duly finished. Modesty made up of 18mm thick prelaminatedMDF board duly finished .The mobile Pedestal shall be of size: 480 Width mm x640 Depth mm x 600 Height mm. Mobile pedestal shall be made of 18mm thick pre laminated MDF board duly finished .Side unit ofSize: 1500 Width mm x 450 Depth mm x 750. The side unit Top surface shall made up of 36 mm thick pre laminated MDF board duly finished . Modesty, side panel & understructure made up of 18mm thick pre laminated MDF board duly finished( rates including all taxes)
4	ACTO/ PA ROOM TABLE :- Table With Pedestal & Side Unit : Table Size-1800 (W) X 900 (D) X 750 (H) mm .Table top made of 25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 0.6mm thick Backing Laminate.-Flat edge duly sealed with 2mm thick PVC Beading. Modesty panel & Side panel made of 18mm thick PreLaminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine withcorner rounding function. Glide screws is provided at the bottom of the legs for level adjustment. Grommets (cut outs) is provided on table top for cabling. Grommets is provided with PVC cover.The three drawer unitsize-680(H)x400(W)x450(D).Mobile pedestals is placed below table top. Mobile pedestals made of 18mm thick Pre laminated Particle board. The sides of drawers and facia made of 18mm thickpre laminated Particle Board. Back of the pedestal made of 9mm Pre laminatedParticle Board. Pedestal stand-alone and not supported to the table top. Pedestals have 3 drawer 2 for personal and 1 for lateral files.Drawers are provided with single extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system, SS handles and four number poly-propylene castorsis provided with the pedestal.Side Unit Size-900(W)X450(D)X750(H) mm. Table top made of 25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 0.6mm thick Backing Laminate.-Flat edge duly sealed with 2mm thick PVC Beading. Modesty panel& Side panel made of 18mm thick Pre Laminated Particle Board. All exposed edgesare sealed with 2mm PVC edge beading.The side shutter and shelves are made of 18mm thick Pre Laminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. The back is made of 18mm thick Pre Laminated Particle Board. Each unit have lockable double door is fitted with hinges. Each unit have one numbers of adjustable shelves.Skirting is made of 18mm thick PreLaminated Particle Board.All exposed edges are sealed with 2 mm PVC edge beading. (including all taxes)
5	STAFF WORK STATION LINEAR WORKSTATION :-1200x750mm :Providing andFixing Panel based Modular Workstations of 45 mm thickness with extruded aluminum end post of size 45x23mm. Top trim is of aluminum section of size 45x13.7mm and snap fitted on its base of size 45x 28.4mm. The aluminum framework is supported on lower and upper partition block. Bottom Block is made up of 9mm pre-laminated particle board of desired shade which is pasted on thick particle board batten frame, which is properly screwed to end post and bottom electrical race way. Upper block is fixed above the table top and is made up of particle battens fixed with 12 mm thick pin boardand cloth of desired shade, Optionally White Boardcan be provided instead of pin board. Raceway- one bottom raceway is provided as standard for drawing wires along the width of panel , additional raceways can be added in the middle of the partition and both above and below the table top. The raceway is covered with 100 mm wide aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip of size 86.2x34.3mm Connectors- complete system is interconnected with panels in desired layout with the help of 2-way, 3-way, 4-way fittings and aluminum covers. TABLE TOPS- table tops to be made up of 25mm thick pre-laminated particle board. Exposed edges are covered with 2mm thick PVC edging applied on automatic machine with hot melt glue .The tops are supported on partition with the help of metal brackets. GABLE END- gable end is made up of 18mm pre-laminated particleboard of desired shade and screwed to top with help of metal L brackets. DRAWER UNIT- drawer unit to be made up of 18mm thick pre-laminated particle board for outer Frame .Internal 3 drawers to be made up of 18mm thick pre-laminated particle board with 9mm pre-laminated bottom. Drawer will run on bottom-mounted channels. All 3 drawers are locked with center lock. KEY BOARD TRAY-The keyboard trays are made out of 18mm PLPB under the worktop with sliding channels. Trays are also available in CRCA and PVC material. CPU TROLLY - The CPU Trolleys are made out of powder coated MS sheet with adjustable width, front & back open & provided with front 2 lockable castors to ease out the wire accessibility from the CPU.All complete as per guiding image, specifications and in working conditions to the satisfaction of Engineer-in-charge. (Rate including all taxes)
6	CONFRENCE TABLEConference Table: Size: 30000 (L) x 680(W) x 750(H) mm. With Wire Manager. The top shall be 37 mm thick (18 mm mdf + 18 mm mdf + 0.6 mm laminate + 0.4 mm Membrane ) Edge Profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom. In Understructure the Legs shall be made from 25 mm plain MDF having a straight profile with half round edges and with 0.6 mm thick post Forming laminate . Overall thickness of leg shall be 26.2 mm .The modesty panel in understructure shall be made from pre-laminated MDF boards of 18 mm thick with 2mm thick PVC edge beading on all sides. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. There shall be Wire Management wire carrier shall be made from 0.6 mm thick CRCA powder coated and carrier cover shall be made of 12 mm thick MDF painted all over.Cutting of Sheet Should be done on NC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stove enamellings to remove grease,rust, scale and any other foreign element before Powder coating. The minimum thickness of powder coated should be 40-50 microns. ( Rate Including All Taxes)
7	CenterTable : The dimension of the table shall be (L) 1200 mm x (W) 600 mm x (H) 450mm, the material of the top shall be plywood with VENEER 18mm thick .The table support to be made of teak wood of size-55x22mm.CenterTable Leg to be made of teak wood of size- 50x50mm & should be PU polished.(rates including all taxes)
8	SQUARE TABLE Corner Table: The dimension of the table shall be (L) 600 mm x (W) 600 mm x (H)450mm, the material of the top shall be plywood with VENEER 18mm thick .The table support to be made of teak wood of size-55x22mm.CenterTable Leg to be made of teak wood of size- 50x50mm & should be PU polished.(rates including all taxes)
9	LIBRARY TABLE :- 7500 X 1300X750mm Tableare made of pre laminated particle board. Tops are made of 45 mm effect with full compact half moon T molding. Tops with Melamine finish in Rosewood. Melamine finish provides water, heat & scratch resistant. Sides are made of 25 mm with full compact PVC edging. Sides with Melamine finish in grey. Fronts are made of 25 mm with full compact PVC edging. Table front with Melamine finish in Rosewood. All the components are assemble by the imported lock. .(rates including all taxes)
10	COMPUTER TABLE :- Office Table With Three Drawer & Key board : Over all size-1200(W)X600(D)X750(h) in mm. Table top made of 18 mm pre-laminated particle board with 2mm thick PVC edge beading on all sides. The modesty panel and sidepanel made of 18mm thickPre Laminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. 3 drawer unit and Key board tray made of 18mm thick Pre Laminated Particle Board. All exposed edges are sealed with 2mm PVC edge beading. Glide screws is provided at the bottom of the legs for level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVc cover. (Including All taxes)
11	DEPUTY COMMISIONER CHAIR :- HighBackChair:The back & seat is made up of 1.2 cm. thick hot pressed plywood up holstered with leatherite and moulded Polyurethane Foam. The backfoam is designed with contoured lumber support for extra comfort.Back Size:52.0cm.(W) X 85.0cm.(H) SEAT SIZE: 52.0cm.(W) X 51.0cm.(D).The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20+/-2 for25% compression. SEAT-BACK CONNECTING SPINE: The seat and back are arrested together with a 9.0cm (w) spine made of 0.8cm thick. HR steel. Cutting of Sheet Should be done on CNC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending. The spine is black powder-coated. ARMREST ASSY: The armrest assy.comprises of three parts viz. the armrest support tube and P.U. armrest and thearmrest top. The armrest tube assy. is made of 2.54cm(1") x 16 BG. M.S. E.R.W.support tubes and Chrome plated. The P.U. armrest is made of black integral skin polyurethane with 50-70 shore "A" Hardness and reinforced with M.S. insert. The arm rest top is made of ABC & upholstered with foam & pure leather. The mechanism of the chair shall have following features : 360° revolving type, Knee Tilt system, 5-position locking with antilock back mechanism. Tilt tension adjustment and position locking with anti-shock back mechanism,which prevents the back rest from impacting the user when the lock is released. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0+/-0.3 cm. The pedestal shall be made of die-cast polished aluminum it shall be fitted with 5 nos.twin wheel castor. The size of the pedestal shall be 62.0 +/- 1.0 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded inblack nylon. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth ofChair - 70.0 cm as measured from pedestal below with castor. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust,scale and any other foreign element before Powde rcoating. The minimum thickness of powder coated should be 40-50 microns. ( Rates including All taxes)
12	DEPUTY COMMISIONER VISITOR CHAIR :-Visitor Chair: The back & seat is made up of 1.2 cm. thick hot pressed ply wood up holstered with leatherite and moulded Polyurethane Foam. The back foam is designed with contoured lumber support for extra comfort. Back Size: 48.0cm.(W) X65.0 cm. (H) SEAT SIZE : 48.0 cm. (W) X 48.0 cm. (D).The poly urethane foam is moulded with density = 45+/-2kg/m 3 and Hardness=20+/-2 for25% compression. SEAT-BACK CONNECTING SPINE: The seat and back are arrested together with a 9.0cm (w) spine made of 0.8cm thick. HR steel. Cutting of Sheet Should be done on CNC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending.The spine is black powder-coated. The tubular frame is cantilever type & made of 4.0cm x 2.0cmx 0.2cm.thk M.S. E.R.W tube .Bending of Tube Should bedone on CNC operated machine to ensure accuracy of bending of tube. All themetal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust, scale and any other foreign element before Powder coating. The minimum thickness of powder coated should be 40-50microns( Rates including All taxes)
13	CTO/ACTO CHAIR :- Mid Back Chair The cushioned seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric.the insert moulded foamis assembeled overa load bearing plastic seat cover. The back made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. Size of back (W)-48.5cm, (H)-62.0cm & size of seat (W)-51.0cm x (D)-52.5cm. Armrest are injection moulded with height adjustable up to 4.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket made of Aluminium die cast piece connecting back with mechanism. The chair is provided with pneumatic height adjustment which shall have stroke of 10.0cm.The pedestal made of die-cast polished aluminium. it fitted with 5 nos twin wheel castor. The size of the pedestal 62.0cm pitch-centre-dia (70.0cm with castors).The twin wheel castors are injection moulded in black nylon( Rates including All taxes)
14	CTO/ACTO Visitor Chair: The cushioned seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric.the insert moulded foam is assembeled over a load bearing plastic seat cover. The back made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. Size of back (W)-48.5cm, (H)-62.0cm & size of seat (W)-51.0cm x (D)-52.5cm. The sled base leg frame welded assembly made from MS ERW round tube of 25mm with 2mm thick with base plate for seat fixing. Bending of Tube Should be done on CNC operated machine to ensure accuracy of bending of tube.Visitor Chair frame is chrome coated. ( Rates including All taxes)
15	PA/COMPUTER CHAIR :- High Back Chair : The seat and back are made up of 1.2 cm thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam with PVC lipping all around.The back foam is designed with contoured lumber support for extra comfort. Back foam size 470(W) x720(H) mm. seat foam size 480(W)x 465(D)mm.The one piece armrest made of black integral skin polyurethane with 50-70shore ‘A’ hardness and reinforced with M.S. insert. The armrests are fitted to theseat with seat/armrest connecting strip assembly made of 0.6cm thick. HR steel.Cutting of Sheet Should be done on NC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending.The center tilt mechanism shall be designed as-360°revolving type,17°±2°maximum tilt on pivotat center, Up right position locking, Tilt tension adjustment. The pneumatic height adjustment have an adjustment stroke of 12.0cm.TheTelescopic bellow as:-The bellow is 3 piece telescopic type and injection molded in black polypropylene .The pedestal is injection molded in black 30% glass filled Nylon. A 10.5 dia forged bright zine plated M.S. caster pinpress-fitted into each prong for holding the castors. The pedestal shall be 700 mm pitch-centre- dia. (750 mm with castors).The twin wheel casters are made of nylon .Overall Dimensions of Chair as measured from pedestal - Width-75. cm and Depth-75.0cm. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust, scale and any other foreign element before Powder coating. The minimum thickness of powder coated should be 40-50microns. (Rates including All Taxes)
16	CONFERENCE CHAIR :- CHAIR REVOLVING CHAIRof size ( H 1280 X D 650 ) is made up of is made up of 13.5 MM thick hot pressed plywood upholstered with Leatherette and Polyurethane Foam (HD FOAM) and the back is made up 12 MM. thick hot pressed plywood upholstered with Leatherette and molded polyurethane foam (HD FOAM) with theback ply and foam is designed to provide maximum lumber support for comfortable seating posture. The baseseat is of size ( W 520 x D 420 x T 110 ) and back seat of size( W 520 x D 600 x T 100 ). (Rates including All Taxes)
17	COMPUTER CHAIR :- Mid Back Chair: seat & back made of 12mm thick hot pressed plywood, with fabric and moulded polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. Back foam size 500(W) x490(H) mm. seat foam size 500(W)x 465(D) mm. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. Theone piece armrest made of black integral skin polyurethane with 50-70 shore ‘A’hardness and reinforced with M.S. insert. The armrests are scratch and weatherresistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.6cm thick. HR steel. Cutting of Sheet Should be done on CNC operated machine to ensure accuracy of cutting and bending of Sheet Should be done on CNC operated machine to ensure accuracy of bending.The center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivotat center, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. The Telescopic bellow as:-The bellow is 3 piece telescopic type and injection molded in black polypropylene.The pedestal is injection molded in black 30% glass filled Nylon .A 10.5 dia forged bright zine plated M.S. caster pin shall be press-fitted into eachprong for holding the castors. The pedestal shall be 700 mm pitch-centre-dia. (750mm with castors).The twin wheel casters are made of nylon. Overall Dimensions of Chair as measured from pedestal - Width-75. cm and Depth-75.0cm. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stovee namellings to remove grease, rust,scale and any other foreign element before Powder coating.The minimum thickness of powder coated should be 40-50microns. (Rates including All Taxes)
18	PUBLIC SEATING DESK :- Providing & Fixing 3 Seater Metal Perfo waiting chairs with 600mm x 1800mm x 800mm arms Fb/Perforated seat and back for L 3CH UP. Powder coated perforated steel seat and back. Chrome plated steel base and armrest with upholstered cushion back and seat. (Rates including All Taxes)
19	2 SEATER SOFA :- Providing and fixing in position sofa Size: 1500mm (W)x 650mm (D) x 720 mm (H) x 390 mm (SH)Providing frame of size 75x75 mm, the structure to be in teak wood frame, for seat, back and arms with 9mm thick BWR ply (710 grade) cladding for façade, side and back or as mentioned in the drawing with reqd. hardware as per drawing.All the surfaces of the ply and wood shall include providing and applying two coats of fire retardant paint and wood preservative paint. The seat, back and arm rest to be in 50 grade High density polyutherene form covered with recron polyfill for softer seating comfort and half Natural Italian leather of approve make and thickness.Legs to be provided with rubber/PVC shoes. HD U foam including making round edge etc with approved cloth upholstery of Rs.1250/mtras per detail design & drawings.All exposed surfaces to be duly melamine polished of approved shade. (Rates including All Taxes)
20	SOFA SET 5 SEATER (3 +2) :- Sofa 3+1+1: Size of 1 seater sofa shall be 1010 (L) 920 mm (W) 950 (H) seating area length 560 mm & seating area width 510mm. Size of 3 seater sofa shall be1960 (L) 920 mm (W) 950 (H) seating area length 1520 mm & seating area width 510mm. The frame material to be tropical wood + pine wood, Length of S-spring to be 510 mm, width of belt to be 40mm. There should be pocket on each side of sofa. The seat foam & back foam density to be 40kg/m3 up holstered with leatherette. The material for handle and leg to be wood and should be polish. (Rates including All Taxes)
21	FILE UNIT :- Open File Unit : Overall size-1050(W)X450(D)X750(H) in mm. The open file unit made of 18 mm pre-laminated particle board with 2mm thick PVC edge beading on all sides. All exposed edges are sealed with 2mm PVC edge beading. All the PVC edge beading should have press through 200 ° Temperature hot melt glue by automatic through feed edge banding machine with corner rounding function.Glide screws is provided at the bottom of the legs for level adjustment. (Rates including All Taxes)
22	SS DINNING TABLE WITH 6 CHAIR FOR CANTEEN :- Dinning Table: Table Providing & placing dinning table of Stainless steel grade 202 of size 1800mmW x 900mm D x 750mm H. Understructure to be made up of 40x40x1.2mm thick. SS hollow pipes with foot rest at the height of 75mm. Two loop legs with table top frame & added middle horizontal support (along the width in top frame for 1800W). Top & understructure should be welded. Complete base structure to be in welded construction. Provision for levellers should be given for adjusting height if required. Dinning Chair : Shall be Tubular MS chrome plated 25diameter, 1.6 mm thickness with leg reinforcement and 12mm thick polymoulded for seat at 450mm H and diameter of seat shall be 400 mm.
23	NEWSPAPER STAND : Providing and placing newspaper stand of size 900 x 400 x 900 made with fully welded steel construction rigid but light in weight and the powder coated finishthree side is coverd with 22 g steel sheet, round pipe of 25mm 18 gauge and heavy duty 75mm nylon castors for easy moment (Rates including All Taxes)
24	PODIUM :-Overall dimension shall be H 1200 x W 750/600 x D 450mm.Podium shall be made of 18mm thick MDF board ISI marked. The podium shall be post formed. The base shall be of 25mm commercial ply ISI marked. Laminate shall be used 0.6 for post form. One shelf shall be provided below the top. The self shall be mounted on telescopic channels. Bottom shelf shall be 70mm above base. The base shall be fixed on post form strips of 150mm width.The edge banding shall be done by 2mm thick PVC tape by hot pressed machine of Matching colour. The overall appearance of the product shall be as per photograph (Rates including All Taxes)