1 Dismantling Works- Class Iii Flats Carefully Dismantling / Disengaging And Removing The Following Items From Interior Area Of Class Iii Flats ( Approx. Carpet Area Of Flat Is 550 Sqft ) . A ) Existing Marble Mosaic / Ceramic Tile, Kota Or Any Other Flooring / Skirting / Wall Dado Including Bed / Back Mortar, Wall Plastering Etc., By Approved Methods, So As To Expose The R.C.C Floor Slab / Brick Wall Without Damaging The Slab / Wall. Approximate Area Of Dismantling Is 80 Sqm. B ) Carefully Disconnecting And Removing All The Existing Internal-Exposed / Concealed Plumbing And Sanitary Lines Including Wall Pieces, All Fittings And Fixtures Like Taps, Stop Cocks, Shower, Wash Basin, Medicine Chest, Mirror, Curtain Brackets, Traps Etc................ For Full Details, Please Go Through The Tender Documents. 2 2 Dismantling Works-Class Iv Flats All Same As Item 1 Above But For Dismantling Works In Interior Area Of Class Iv Flats Of Approx. Carpet Area Of 400 Sqft. Approx. Area Of Flooring / Skirting / Wall Dado / Plastering To Be Dismantled Is Of 65 Sqm 3 3 Water Proofing -Class Iii Flats Water Proofing To Sunken Area In Toilet, Bath Room And Morie Area Of Class Iii Flats By Engaging Approved Water Proofing Specialized Firm As Per Their Specifications But Approved By The Bank Which Comprises Thorough Cleaning Of The Surfaces, Applying Water Proof Chemical Coating And Above Which Plastering With Cm 1:3, 15 To 20 Mm Thick Mixed With Approved Make Polymer To The Entire Floor Slab Of Sunken Portion Including On All The Four Sides Up To 150Mm Above Proposed Floor Level And Testing For Leakage By Ponding Of Water Etc. Complete..................... For Full Details, Please Go Through The Tender Documents. 4 4 Water Proofing -Class Iv Flats Water Proofing To Sunken Area In Toilet, Bathroom And Morie Area Of Class Iv Flats By Engaging Approved Waterproofing Specialized Firm All Same As Item 3 Above. Approximate Plan Dimensions Of Toilet To Be Treated In Flats Is 1050Mm X 950Mm Bathroom Is 1750 X 1150Mm And Kitchen Morie Is 850 X 750Mm. 5 5 Concealed Plumbing Lines Providing, Cutting, Fixing, Testing And Commisioning Concealed Waterlines Of 20Mm Diameter Using C-Pvc Threaded Pipe Of Sdr 11 Including All The Necessary Specials Like Elbows, Tees, Couplings Etc. All The Concealed Lines Shall Be Properly Fastened To The Wall Using Gi Clamps @Maximum Spacing Of 450Mm. Rate Shall Be Inclusive Of Making Necessary Cutting And Chasing On The Walls To Receive The Plumbing Lines, Placing The Plumbing Line, Properly Packing Using Cement Mortar Admixed With Waterproofing Chemicals, Followed By Pasting Approved Quality Fiber Mesh On The Surface Of The Chasing, Wastages, Pressure Testing For Leakage Etc. Actual Linear Measurement Shall Be Reckoned For Payment Purpose. 6 6 Providing And Laying Cpvc Pipes All Same As Item 5 Above, But For Providing And Laying Cpvc Pipes Of 15Mm Diameter 7 7 Pvc Pipes Of 50Mm Dia Providing And Fixing Pvc Pipes Of 50 Mm Diameters ( Minimum Test / Working Pressure 6 Kg / Sq.Cm ) Of Approved Quality And Make, Including All Fittings, Of The Same Manufacturer Of The Pipes Or Approved Equivalent For The Waste Lines For Toilet, Bathroom, Washing Machine And Wash Basin And Fixing The Pipes With Clamps At 1 Mtr Spacing For Concealed / External Work Including Cutting Chases In The Wall / Floor For Concealing The Pipes, Connecting To Duct Line / Manhole, Including Fixing Pipes With Concrete Blocks Etc. Complete. ................For Full Details Go Through The Tender Documents 8 8 Pvc Pipes Of 75Mm Dia All Same As Item 7 Above, But For Pvc Pipes Of 75Mm Dia 9 9 Pvc Pipes Of 110Mm Dia All Same As Item 7 Above, But For Pvc Pipes Of 110Mm Dia 10 10 Nahani Trap Providing, Fixing And Connecting Approved Quality And Make Pvc Nahani Trap / Multi Trap Of 100X75mm Dia Outlet With A Minimum Water Seal Of 50Mm To The Waste Water Pipe Line. Rate Shall Be Inclusive Of Making Trenches Of Minimum Width 250Mm And Filling The Sump Using Concrete 1:1.5:3 Admixed With Waterproofing Chemical, Providing And Fixing 125Mm Dia Ss Gratings Etc. All As Directed By The Banks Engineer. 11 11 Wall Plastering Preparing The Surface Of The Masonry / Rcc Walls By Raking, Watering And Thorough Cleaning Using Wire Brush, Broom, Providing And Applying Average 20 To 25 Mm Thick Cement Plaster Using Cm 1:4 ( Comprising Of A First Coat Of 12 Mm Thickness, And A Second Coat Of 9 To 12Mm Thickness ) Using Approved Quality Opc And M. Sand, True To Plumb, Level And Line. The Wall Plaster Shall Have An Even Surface And Shall Be Finished With Recessed Joints To Receive The Tile Dado / Skirting. The Rate Shall Include For Cutting, Curing, Labour, All Leads And Lifts, Etc. Required For The Finished Work, All As Directed By The Bank?S Engineer. 12 12 Alterations In Cooking Platform -Class Iii Making Alterations And Improvements To The Existing Cooking Platform In Class Iii Flats By Taking Up The Following A ) Providing And Constructing New Support Pillar And Raised Platform Below The Cooking Platform With Brick Work In C.M 1:4 Including Plastering The Exposed Surfaces Etc. B ) Extending The Rcc Slab Over The Mori Area And Closing The Existing Sink Opening By Lapping The New Reinforcement Bars To The Old By Cutting And Removing The Concrete Of The Existing Platform To Expose The Old Reinforcements, Making Grooves In The Wall To Have Proper Insertion, Etc ............For Full Details Go Through The Tender Documents. 13 13 Alterations In Cooking Platform -Class Iv Making Alterations And Improvements To The Existing Cooking Platform In Class Iv Flats By Taking Up The Following A ) Providing And Extending The Support Pillars Up To The Platform Level And Making Raised Platform Below The Cooking Platform With Brick Work In C.M 1:4 Including Plastering The Exposed Surfaces Etc. B ) Extending The Rcc Slab Over The Sink Opening By Lapping The New Reinforcement Bars To The Old By Cutting And Removing The Concrete Of The Existing Platform To Expose The Old Reinforcements, Making Grooves In The Wall To Have Proper Insertion, Etc. .................For Full Details, Please Go Through The Tender Documents. 14 14 Providing And Laying Screed Concrete Preparing The Surface Of The R.C.C Floor Slab By Thorough Cleaning And Priming With Cement Slurry Admixed With Approved Make And Quality Water Proofing Compounds, Providing, Mixing, Laying, Spreading, Levelling And Manually Consolidating Using Hand Rammers P.C.C 1:3:6 For An Average Thickness 40 To 50 Mm Using Approved Quality 12 Mm And Down Size Graded Broken Granite Stone Aggregates, Approved Quality M.Sand And Portland Cement Of Approved Make, As Screed Layer In Flooring. The Surface Of The Screed Laid As Above Shall Be Made Rough Using Wire Brushes Or Brooms. ........For Full Details, Please Go Through The Tender Documents. 15 15 Vitrified Tile Flooring Preparing The Surface Of The Screed Concrete Layer / Floor Slab By Thorough Cleaning And Priming With Cement Slurry To Receive The New Flooring, Providing And Laying Flooring In The Approved Pattern, Line Level Etc., Using 600 Mm X 600 Mm Or Approved Size Polished Vitrified Tiles Of Approved Make And Shade Over A Bed Of Cement Mortar Prepared By Hand Mixing Approved Make Portland Cement And Approved Quality M. Sand In The Ratio 1: 4, Laid, Spread And Consolidated To Get An Average Consolidated Thickness Of 20 Mm. The Tiles Shall Be Set With A Floating Layer Of Grey Cement Slurry And Joints Shall Be Pointed With Tile Grouts Of Approved Make And Quality To Match With The Shade Of The Tile. ...........For Full Details, Please Go Through The Tender Documents. 16 16 Vitrified Skirting Preparing The Surface Of The Walls To Receive The New Skirting By Watering And Cleaning, Providing And Fixing 100 Mm Height Skirting Cut Out Of 600 X 600 Mm Or Approved Size Fully Vitrified Tiles Of Approved Make And Shade Over A Backing Of Cm 1: 4 ( Using Approved Quality M. Sand And Opc ) For The Required Thickness, True To Plumb And Line, Set With Grey Cement Paste And Joint Pointed With Tile Grouts Of Approved Make And Quality To Match With The Shade Of The Tile. ........For Full Details, Please Go Through The Tender Documents. 17 17 Wall Dado Tile Work Providing And Fixing 1St Quality / Premium Quality Ceramic Glazed Tiles Of Size 300Mm X 450Mm ( Or Approved Nearest Available Size ) And Of Approved Shade And Make, For Wall Dado Over The Plastered And Bordered Surface As Per Item No: 11 With 6 Mm Average Thick Back Mortar Of C. M 1:3 ( 1 Cement : 3 M. Sand ) And Set With Cement Paste Spread Fully Over The Whole Back Area Of The Tile ( The Work Is Liable To Be Summarily Rejected If The Joint Is Found Susceptible To Hollowness ) And Also Including Pointing The Joints With Tile Grout Of Matching Shade, Curing, Etc. All Complete As Directed By The Bank?S Engineer. ..........For Full Details, Please Go Through The Tender Documents. 18 18 Floor Tiles Providing And Laying First Quality / Premium Quality Anti-Skid Ceramic Floor Tiles Of Size 300Mm X 300Mm ( Or Approved Nearest Available Size ) , Of Approved Shade And Make, In Floor Laid Over 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 M. Sand ) , And Cement Paste Spread Fully Over The Base Area Of The Tile Including Providing Proper Slope For Draining Out The Water Fully And Smoothly Without Any Traces Of Water Stagnating Anywhere ( The Work Is Liable To Be Summarily Rejected If The Slope Is Not Provided Properly Or The Joint Is Found Susceptible To Hollowness ) And Rendering The Joints With Epoxy Grout To Match The Shade Of The Tile, Curing, Etc. All Complete As Directed. .............. For Full Details, Please Go Through The Tender Documents. 19 19 Door Shutter With Frame Carefully Dismantling And Removing The Existing Door Frames With Shutters In Bath & Toilets, Including Finishing The Wall Surfaces Properly And Neatly As Required Using Cement Mortar 1:3 Of Required Thickness, Providing And Fixing Minimum 30Mm Thick Approved Brand Solid Pvc Door Shutter In Approved Shade And Design Including Door Frame Of Suitable Solid Cubical Section With Required Length As Per Site Conditions Etc. Rate Shall Be Inclusive Of Fixing 3Nos Of 100 X 25Mm Aluminium Butt Hinges, Pvc Door Handles On Both The Sides, One Number 100Mm Pvc Tower Bolt To Each Side Of The Door Shutters, Carting Away The Debris If Any Etc. All As Directed By The Banks Engineer. 20 20 Aluminium Ventilators Aluminium Ventilator For Bathroom And Toilet - Carefully Dismantling And Removing The Existing Wooden Ventilator And Finishing The Opening, Providing And Fixing New Ventilator Of Approx. Size 600 Mm X 900 Mm Made With Powder Coated Aluminium Frames Of Suitable Sections And Louver Panels Using 5 Mm Thick Frosted Glass Fixed To The Frame Using Cleats And Beading And Having A 8? Square Opening For Fixing Exhaust Fan Including Providing Additional Frame Work If Necessary Etc. All Complete As Directed By The Bank?S Engineer. All The Corners And Joints Of The Frame & Sash Shall Be Mitred Cut & Jointed Well And The Frame Joints With Wall / Ceiling Etc. Shall Be Properly Sealed With Silicon Sealent Etc. 21 21 Two Track Aluminium Sliding Window Carefully Dismantling And Removing The Existing Wooden Window In Kitchen Area And Finishing The Walls Etc. With C.M 1:3 Of Required Thickness, True To Level, Plumb Etc., Supplying And Fixing Of Powder Coated Aluminium Windows Of Approved Make With Frames Having 2 Tracks For 2 Glass Shutters And One For Mesh Shutter. The Bottom Frame Is Of 61.85 X 31.75 X 1.50Mm With Minimum Weight Of 0.909Kg / Mtr, Sides And Top With Sections Having Minimum Weight Of 0.784Kg / Mtr Etc. The Sliding Shutter Sections Shall Be Of 40X18x1.55Mm With Minimum Weight Of 0.547Kg / Mtr Etc. .......................For Full Details, Please Go Through The Tender Documents. 22 22 Wash Basin Providing And Fixing Wash Basin Of 550X400mm Size With Half Pedestal Of Approved Make While In Colour With Cp Waste Coupling, 32 Mm Dia Flexible Waste Pipe, 15Mm Dia Pvc Connections Etc. Complete. The Wash Basin Shall Be Mounted / Fixed To The Wall Using Approved Quality Fisherbolts / Heavy Duty Aluminium Clamps, Inlet / Outlet Connections Etc. Rate Quoted Shall Be Inclusive Of Sealing The Gaps Between The Wash Basin / Pedastal And The Adjoining Surface Using Approved Quality Polisulphide Sealent Etc., All Complete As Directed By The Banks Engineer. Basic Rate Of Wash Basin With Pedestal To Be Considered Is Rs 3200 / - Excluding Gst. 23 23 Floor Mounted Ewc With Seat Cover Providing And Fixing White, Floor Mounted Ewc With Seat Cover And Necessary P / S Trap And Connecting The Same To The Vertical Stack With Necessary Pvc Pipe Of Suitable Diameter Of Approved Quality, All As Per The Directions Of The Banks Engineer. The P / S Trap Shall Be Set In Waterproof Cement Concrete And Joints Shall Be Made Watertight And Tested For The Same. The Rate Shall Also Include For Providing And Fixing 10 Litre Capacity P.V.C Dual Flush Tank With 15 Mm P.V.C Connection, 32 Mm Dia P.V.C Flush Pipe And All Other Accessories Required And Connecting The Same To The Ewc / Water Lines Etc. As Directed By The Banks Engineer. ( Basic Price Of Ewc- Rs 2000 / - Exclusive Of Gst ) 24 24 Long Body Bibcock 15Mm C.P. Brass Long Body Bibcock ( Basic Price ? Rs.1050.00 Exclusive Of Gst ) 25 25 Shower Rose 100Mm C.P. Brass Shower Rose Revolving Type With 225Mm Long Shower Arm ) ( Basic Price Rs. 1800.00 Exclusive Of Gst ) 26 26 Angle Cock 15 Mm C.P Brass Angle Cock ( Basic Price - Rs.1000.00 Exclusive Of Gst ) 27 27 Concealed Stop Cock 15 Mm C.P Brass Concealed Stopcock With Exposed Part ( Basic Price - Rs.2000.00 Exclusive Of Gst ) 28 28 Pillar Cock 15 Mm C.P. Brass Pillar Cock ( Basic Price ? Rs. 1000.00 Exclusive Of Gst ) 29 29 2Way Bibcock Cp 2Way Bibcock With Wall Flange ( Basic Price ? Rs. 1350.00 Exclusive Of Gst ) 30 30 Health Faucet Cp Health Faucet With 8Mm Dia. 1.2 Metre Long Flexible Tube And Wall Hook ( Basic Rate ? Rs. 1200 Exclusive Of Gst ) 31 31 Sink Cock Ss Sink Cock With Swan Neck ( Basic Price Of Sink Cock-Rs 2500 / - Exclusive Of Gst ) 32 32 Towel Rod 600 Mm Long C.P Brass Towel Rod ( Basic Price - Rs. 1500 Exclusive Of Gst ) 33 33 Towel Ring Towel Ring ( Basic Price - Rs. 700.00 Exclusive Of Gst ) 34 34 Soap Dish C.P. Brass Soap Dish ( Basic Price Rs. 750.00-Exclusive Of Gst ) 35 35 Coat Hook C.P Brass Coat Hook ( Basic Price ? Rs. 450.00 Exclusive Of Gst ) 36 36 Bathroom Cabinets Supply And Fixing Supplying And Fixing Bathroom Cabinets Of ( Medicine Chest ) Approved Design With Shelves, Brush Holders Etc. Made Out Of Minimum 3 Mm Thick Opaque Acrylic Sheets Of Approved Colour ( Basic Rate ? Rs. 1300 Exclusive Of Gst ) 37 37 Mirror With Marine Plywood Backing Providing And Fixing 450 Mm X 600 X 6 Mm Thick Mirror Of Approved Quality And Make With 8Mm Thick Marine Plywood Backing, 50Mm Pvc Framework Etc. The Rate Shall Be Inclusive Of Necessary Screws, Studs? Clips, Wastages, Etc. Complete As Per Requirements And As Directed By The Banks Engineer. 38 38 Dismantling Of Exisiting Curtain Rods Carefully Dismantling And Removing The Existing Curtain Rods With Wooden Brackets, Providing And Fixing 25 Mm Dia Heavy Duty Powder Coated Aluminium Drapery Rods For Windows / Doors Openings With Brackets / Fixing Arrangements And Ornamental Knobs Of Approved Brand / Design Etc. Complete All As Per Specifications And As Directed By Banks Engineer. 39 39 Kitchen Cabinets In Class Iii Flats Providing, Fabricating, And Erecting Storage Cabinets Below The Kitchen Platform In Class Iii Type Flats As Per The Attached Sketch And With Following Specifications. A ) Storage Cabinets: - ( Approx. Elevation Area 3000Mm X 800Mm ) . The Cabinet, Shutters And Facia On Brick Pillars / Rcc Slab Shall Be Made With 16 Mm Thick Bwp Grade Marine Plywood Of Approved Make Conforming To Is 710. All The Interior Surfaces Of Shutters / Box Etc. Shall Be Pasted With 0.80Mm Thick Laminate And Exterior Surfaces With 1 Mm Thick Laminate Of Approved Make And Shade And All The Exposed Edges Shall Be Pasted With Edge Banding Of Suitable Size Etc. .............For Full Details, Please Go Through The Tender Documents. 40 40 Kitchen Cabinets In Class Iv Flats Providing, Fabricating, And Erecting Storage Cabinets Below The Kitchen Platform In Class Iv Type Flats As Per The Attached Sketch And With Following Specifications. A ) Storage Cabinets: - ( Approx. Elevation Area 2450Mm X 800Mm ) The Cabinet, Shutters And Facia On Brick Pillars / Rcc Slab Shall Be Made With 16 Mm Thick Bwp Grade Marine Plywood Of Approved Make Conforming To Is 710. All The Interior Surfaces Of Shutters / Box Etc. Shall Be Pasted With 0.80Mm Thick Laminate And Exterior Surfaces With 1 Mm Thick Laminate Of Approved Make And Shade And All The Exposed Edges Shall Be Pasted With Edge Banding Of Suitable Size Etc. ..........For Full Details, Please Go Through The Tender Documents. 41 41 Shutters For Open Shelf In Kitchen Area Providing, Fabricating, And Erecting Shutters For Open Shelf In Kitchen Area Of Class Iii & Class Iv Flats As Per The Attached Sketch And With Following Specifications. The Shutters And The Facia To Racks / Support Pillars Shall Be Made With 16 Mm Thick Bwp Grade Marine Plywood Of Approved Make Conforming To Is 710. All The Interior Surfaces Of Shutters Shall Be Pasted With 0.80Mm Thick Laminate And Exterior Surfaces With 1 Mm Thick Laminate Of Approved Make And Shade And All The Exposed Edges Shall Be Pasted With Edge Banding Of Suitable Size Etc. There Shall Be Four Shutter And The Top Two Shutters Shall Be With Glass Panels Of 4Mm Thick Plain Glass. ...........For Full Details, Please Go Through The Tender Documents. 42 42 General Repairs To Wardrobe Etc. General Repairs To Wardrobe, Doors, Windows And Grills In Flats - Carefully Examining The Wardrobe, Doors, Windows For Functionality Issues Such As ? Having Swelling / Alignment Dis Functionality Etc., Shall Be Repaired / Replaced, Repair & Replacing Broken / Unstable Glass Panes, Repair / Replacing Non-Functioning Hinges / Fittings, Replacing Decayed Wooden Frames / Shutters, Rusted Grills If Any, Removal Of Door Shutters While Laying The Tile Flooring And Re-Fixing The Same After The Tiling Work Including Ensuring Proper Closure Of Doors & Windows After Completion Of The Painting Works Including Disposing Off The Debris Away From The Banks Premises Etc. All Complete As Directed By The Banks Engineer. ..........For Full Details, Please Go Through The Tender Documents. 43 43 Repainting Of Class Iii Flats Repainting The Entire Interior Area Of Class Iii Type Flats By Preparing The Surface Of The Walls, Ceiling And Soffits Or Vertical Sides Of The Beams, Wood And Metal Surfaces, Etc By Scrapping, Sand Papering & Dusting Of Loose Paints / Paint Flakes Etc., Providing And Applying: ( 1 ) Two Coats Of Whitewash With Shell Lime / Obd To Ceiling Etc. ( Area Perflat:55.24Sq.Mt ) ( 2 ) Providing And Applying Two Coats Of Acrylic Washable Distemper Paint Of Approved Make And Shade To The Walls, Beams, Etc. Over A Coat Of Primer And Putty Work Wherever Required ( Area Per Flat: 172.09 Sq.Mt ) . ..........For Full Details, Please Go Through The Tender Documents. 44 44 Repainting Of Class Iv Flats Repainting The Entire Interior Area Of Class Iv Type Flats By Preparing The Surface Of The Walls, Ceiling And Soffits Or Vertical Sides Of The Beams, Wood And Metal Surfaces, Etc By Scrapping, Sand Papering & Dusting Of Loose Paints / Paint Flakes Etc., Providing And Applying: ( 1 ) Two Coats Of Whitewash With Shell Lime / Obd To Ceiling Etc. ( Area Per Flat:41.71Sq.Mt ) ( 2 ) Providing And Applying Two Coats Of Acrylic Washable Distemper Paint Of Approved Make And Shade To The Walls, Beams, Etc. Over A Coat Of Primer And Putty Work Wherever Required ( Area Per Flat: 133.70 Sq.Mt ) . ..........For Full Details, Please Go Through The Tender Documents. 45 45 Rebate For Salvageable Items Removal Rebate For Taking Away The Salvageable Items Removed And Stacked As Per Items 1, 2, 19, 20, 21 & 38
