|
| 1 | Hydraulic Metal Sheet Bending/ press Brake .Machine Description =The machine should be capable of bending metal sheets of specified dimension range to required bending radius and angle. General Power = Machine should operate on 3 Phase Power Supply (415 V + 10%) and should be able to withstand voltage fluctuations, Max. object size = Upto 2500mm length; Thickness of Sheet – 0.5 to 3mm, Max. Bending Radius = 0-100mm, Max. Bending Angle (Degrees) = 90 degree, Sheet material = Mild Steel, Stainless Steel, Aluminium, Copper, Iron etc., Automation Grade = Automatic, Power = 3-5 HP, Bending Force Minimum = 40 Ton |
| 2 | Supplying Manual Metal sheet bending machine : Capable of bending Mild steel, Stainless steel, Aluminium, Copper, Iron sheets of up to 2500mm length/width (Approximately 8 feet), Thickness of sheet 0.5 to 2mm, - Bending capacity- (round punch 0-100 mm radius, V- punch for 90 degree |
| 3 | Manual Hand Shearing Machine, The machine should be capable of shearing metal sheets of specified dimension to required shapes, Shear Thickness = Thickness of Sheet – 0.5 to 2mm, Blade length minimum = 18 inches, Sheet material = Mild Steel, Stainless Steel, Aluminium, Copper, Iron etc. |
| 4 | Hydraulic Shearing Machine, Machine Description = The machine should be capable of shearing metal sheets of specified dimension to required shapes, General Power = Machine should operate on 3 Phase Power Supply (415 V + 10%) and should be able to withstand voltage fluctuations, Max. object size = Upto 2500mm length; Thickness of Sheet – 0.5 to 3mm, Sheet material = Mild Steel, Stainless Steel, Aluminium, Copper, Iron etc., Automation Grade = Automatic, Power = 3-5 HP, Miscellaneous = Adjustable Rake Angle High Alloying Steel Blades Hydraulic Hold Downs. |
| 5 | DC Arc welding Machine 3 phase power supply (415V+10%); 50-300 Amps; Welding current @ 60% duty cycle – full amperage;Welding current @ 100% duty cycle – 75-80% of full amperage capacity; efficiency > 85%. Rod & working capacity – 2mm for 24 hrs; 3mmfor 12 hrs and 4mm for 6 hrs; Portable: suitable Electrode diameter – 2 to 5mm |
| 6 | Welding Accessories : 10mm Electrode cable with holder; 10m work cable with clamp; Doom (Face Shield); Goggles; Gloves; apron |
| 7 | Bench type pillar drilling Machine ( with Motor) : Drilling motor – 1HP – 1.5HP/1500-200RPM (preferably three Phase).Drilling Diameter in steel Max 25MMNumber of Spindle -4Spindle travel 150 – 200mmDistance between Spindle and Table 350- 450MMWorking surface of table – minimum – 300MM * 300MMWorking surface of base – minimum 350mm*450mmColumn diameter – 70- 90mm |
| 8 | Heavy Duty Rotary Hand Drill : Wattage- Minimum 550WDrilling Capacity in steel (maximum) 13mm No load speed minimum 2500rpm Chuck capacity 13mm; speed selection; forward/ reverse rotation; with slide handle; portable; Spindle key capacity |
| 9 | Drill bit set : 1.5, 2 , 2.5, 3 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5mm |
| 10 | Heavy duty Chop Saw : Wattage ; 200-2500 watt; cutting Capacity in mm:- square: 100-120, rectangle; 100*150, Round ; 120-130No- load speed – minimum 3500rpm( with wheel included) |
| 11 | Heavy duty angle Grinder : Wattage: 700-850 Watt; disc diameter: 4 inchesSpeed- minimum 8000rpm; with Safety Guard for cutting, grinding and buffing purpose |
| 12 | Angle grinder with pedestal : Metal cutting wheel, metal grinding wheel, flap disc, Metal polishing wheel, Buffing wheel, Wood cutting blade. |
| 13 | Bench grinder with pedestal : Wattage: 700-850 Watt; disc diameter: 4 inchesSpeed- minimum 2800 rpm; with Safety Guard for cutting, grinding and buffing purpose |
| 14 | Bench grinder wheels (10 inches) : Metal grinding wheel, flap disc, Metal polishing wheel, buffing wheel. |
| 15 | Air Compressor : Horse Power; 1.5-3HP; Discharge pressure; 8 bar; auto Cut off Switch; Speed (RPM): 2500-3000Compressor Technology- ReciprocatingTank Capacity – Minimum 50 LtrsFlow rate; 150 – 200 ltr/minLubrication style – Oil flooded |
| 16 | Spray paint Accessories: Gravity- fed professional typ – 64 spray gun with steel cup; 10m 6mm rubber hose with quick couplers; Mini air filter setup; 1 ltrs of compressor Oil |
| 17 | Manual Pipe Bender. :Bending material – Mild steel and stainless steel pipeDiameter (Dies) – ½ inch,3/4 inch,1 inch,5/4 inch, 3/2 inch,2 inchOperation mode – ManualMax bending angle – 180 degreeAccessories – dies of specified pipe diameter |
| 18 | Hand/ tools/ EquipmentsCutting plier - 7 inchCutting plier - 8 inchesBall pen Hammer -200gBall pen Hammer 500gBall Pen Hammer – 800gEngineers try Square – 12 inchesEngineers try Square - 24 inchesSteel scale – 12 inches.Steel scale – 24 inches.Metallic Measuring Tape 5 mtr.Screw Driver 450mmScrew Driver 250mmScrew Driver 150mm8” round/ flat/ square/triangle/ half round Metal Files.Hand saw – length of blade 450mm (Tapper blade material – high carbon steel).Carbon threading Tap sets (Carbon steel) ¼”Sheet cutting scissors- 12 inches.Sheet cutting scissors- 14 inches. |
| 19 | Tool Trolley and CabinetNo. of drawer; 5-7; lockable drawer.Load capacity; 50 – 30 kg per drawer. Total load capacity; 200- 250kg.Minimum size; 20x25xx30 inch |
| 20 | C –Frame Power Press, Machine Description = The machine should be capable ofcutting, punching or forming metal using tools (dies) attached to the slide (ram) and bed, General Power = Machine should operate on 3 Phase Power Supply (415 V + 10%) and should be able to withstand voltage fluctuations, Capacity = 20 Tons, Length & width of Bed = 500-600mm * 300-400mm, Automation Grade= Semi – Automatic, Automatic, Motor Power = 2-3 HP, Miscellaneous = Crankshaft – Special alloy steel, AdjustableStroke, Efficient Lubrication System, Basic Accessories. |
| 21 | Hand Spot Welding Machine, Machine Description = The machine should be capable of fusing two or more metallic parts together by means of heat, pressure or both forming a joint as the parts cool, General Power = Machine should operate on Two/ Three Phase Power Supply (415 V + 10%) and should be able to withstand voltage fluctuations, Frequency = 50/60 Hz, Rating @ 50% duty cycle = 15 KVA, Transformer Cooling = Air cooled, Earth cable length (min) = 3m, Output main cable length (min) = 3m |
