Tender For Design, Fabrication, Supply, Erection And Commissioning Of Regernerative Type Demineralisation Water Plant Of Capacity 10 M3 / Hr With Fully Automated
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Sep 2022
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvalla → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Design, Fabrication, Supply, Erection And Commissioning Of Regernerative Type Demineralisation Water Plant Of Capacity 10 M3 / Hr With Fully Automated
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Sep-2022 | CORRIGENDUM FOR OMMISION OF TENDER CONDITIONS | Other | 21-Sep-2022 |
| 2 | 14-Sep-2022 | DATECORRIGENDUM | Date | 21-Sep-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | DESIGN, FABRICATION, SUPPLY, ERECTION AND COMMISSIONING OF REGERNERATIVE TYPE DEMINERALISATION WATER PLANT OF CAPACITY 10 m3/hr with fully automated PLC&HMI based control system. |
| 2 | Electronic diaphragm type chlorine dosing system including chemical tank. Relay feedback and level switch to cut-off based on level in chemical tank. Capacity : 6lph at 4 bar.Make : Ion Exchange / Prominent / Milton Roy |
| 3 | Centrifugal pump for filter feed. 10m3/h at 40 m headMake : Johnson (SPX Flow) / Grundfos / Wilo |
| 4 | Electronic diaphragm type SMBS dosing system including chemical tank. Relay feedback and level switch to cut-off based on level in chemical tank. Capacity : 6lph at 4 bar.Make : Ion Exchange / Prominent / Milton Roy |
| 5 | Design, Supply, Testing, Installation and Commissioning of PLC based fully Automatic Multigrade Sand Filter capable of flowrate of 10 m3/h and working pressure of 3.5 bar. UPVC SCH 40 frontal pipework with SCH 80 fittings. The material of contruction of vessel should be FRP. Service, Rinse, Backwash operation by individual pneumatically actuated valves controlled through PLC&HMI.Make of vessel: Pentair / Ion Exchange / eqvMake of valves: Deltech / Crane / eqv |
| 6 | Design, Supply, Testing, Installation and Commissioning of PLC based fully Automatic Activated Carbon Filter capable of flowrate of 10 m3/h and working pressure of 3.5 bar. UPVC SCH 40 frontal pipework with SCH 80 fittings. The material of contruction of vessel should be FRP. Service, Rinse, Backwash operation by individual pneumatically actuated valves controlled through PLC&HMI.Make of vessel: Pentair / Ion Exchange / eqvMake of valves: Deltech / Crane / eqv |
| 7 | Desgin, Supply, Testing, Installation and Commissioning of PLC based fully Automatic Strong Acid Cation Unit capable of flowrate of 10 m3/h. Resin used should be of monospheric nature. Regenerated through counter current regeneration mode. UPVC SCH 40 frontal pipework with SCH 80 fittings. The material of contruction of vessel should be FRP. Service, Injection, Fast & Slow Rinse, Backwash operation by individual pneumatically actuated valves controlled through PLC&HMI. The required net OBR is 100 m3 apart from water required for regeneration. Regeneration to be completed within 65 minutes. Inert resin to be provided as required.Make of Resin: Ion Exchange/Lanxess (monosphere only)Make of vessel: Pentair / Ion Exchange / eqvMake of valves: Deltech / Crane / eqv |
| 8 | Desgin, Supply, Testing, Installation and Commissioning of MSRL degasser of minimum 1 m dia and 2.5 m HOS. Skid mounted blower of SS impeller. UPVC pipework. Skid mounted SS pump for feed to anion, complete included.Make : Ion Exchange/eqvPump Make : Grundfos/Johnson SPX/ Wilo |
| 9 | Desgin, Supply, Testing, Installation and Commissioning of PLC based fully Automatic Strong Base Anion Unit capable of flowrate of 10 m3/h. Resin used should be of monospheric nature. Regenerated through counter current regeneration mode. UPVC SCH 40 frontal pipework with SCH 80 fittings. The material of contruction of vessel should be FRP. Service, Injection, Fast & Slow Rinse, Backwash operation by individual pneumatically actuated valves controlled through PLC & HMI. The required OBR is 100 m3 apart from water required for regeneration. Regeneration to be completed within 61 minutes. Inert resin to be provided as required. Complete with conducitivity indicator at outlet of Anion unit. Make of Resin: Ion Exchange/Lanxess (Monosphere only)Make of vessel: Pentair / Ion Exchange / eqvMake of valves: Deltech / Crane / eqv |
| 10 | Design, Supply, Testing, Installation and commissioning of PLC based fully automatic Mixed Bed capable of flowrate 10 m3/h. UPVC SCH 40 frontal pipework with SCH 80 fittings. The material of contruction of vessel should be FRP. Service, Injection, Fast & Slow Rinse, Backwash operation by individual pneumatically actuated valves controlled through PLC & HMI. The required OBR is 100 m3. Make of Resin: Ion Exchange/LanxessMake of vessel: Pentair / Ion Exchange / eqvMake of valves: Deltech / Crane / eqv |
| 11 | Design, Supply, Testing, Installation and commissioning of HMI and PLC control panel which can regenerate the plant based on timer and quality. Complete with cable, cable trays, pneumatic tubing, FRLs etc. Minimum 15% spares IOs.PLC/HMI make : GE/Allen Bradley |
| 12 | INSTURMENTATION |
| 13 | Raw water and treated water level transmitterMake : E&H/Yokogawa/Emerson |
| 14 | Flow transmitter at outlet of MB.Make : E&H/Emerson/Eqv |
| 15 | ERECTION & COMMISSIONING |
| 16 | Charges towards supervision of Erection and Commissioning |
| 17 | Charges towards plumbing of interconnecting pipework and suction and discharge from raw water tank to treated water tank, limited to 25 meters. |
| 18 | Charges towards installation of MCC panel, HMI panel, cables and cable trays. |
| 19 | Additional spares & consumable: |
| 20 | Minimum 20% of plant spares.Minimum 50% of extra resin to be provided. |
AI Tender Summary
Tender Timeline
Sep 14, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 21, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 21, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender