Piped Water Supply Scheme At- Kondhe Tarfe Shriwardhan Tal-Shriwardhan Dist-Raiagd (Jal Jeevan Mission)
Tender Value
30.93 Lakhs
Estimated cost
Bid Submission
09 Sep 2022
0 days left
EMD
30933
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shrivardhan → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Piped Water Supply Scheme At- Kondhe Tarfe Shriwardhan Tal-Shriwardhan Dist-Raiagd (Jal Jeevan Mission)
BOQ
| Sl. No. | Item Description |
| 1 | Subwork No.1:- Collection Chamber (5.0m X 3.0m) Item No. 1:- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for etc. complete. Lift 0.00 M to 1.50 m |
| 2 | Item No. 2 :-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for etc. complete.Lift 1.50 M to 3.00 m |
| 3 | Item No. 3:-Excavation for foundation / pipe trenches in soft rock including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for Lift 3.00 M to 4.50 m |
| 4 | Item No. 4:-Providing and laying in situ Cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete.P.C.C 1:2:4 |
| 5 | Item No. 5:- Providing & costing inconstructingin situ. C.C of trap granite/ quartzite / gneiss/ metal of approved quality of R.C.C. work as per detailed drawing & design or as directed by Engg. in charge including dewatering , ceterind from work,compacting, finishingthe formed surface withC.M. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( By weight batching & mix design for M-250 & M-300 only use of L&T, ACC Ambuja, Birla Gold, Manikgad, Rajashree etc. cement is permitted excluding M.S or Tor reinforcement in 1) R.C.C. M-250grade. |
| 6 | 2) R.C.C. M-250 for vertical wall |
| 7 | Item No.6:- Providing & fixing in position steel bar reinforcement of various diameters for R.C.C. Pipes,caps,footing, foundation, slab, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, coping, fine arches etc. as per detailed designs, drawing & schedule s including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required etc. complete (including cost of binding wire). Tor steel |
| 8 | Item No. 7:-Refilling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete. |
| 9 | Item No. 8:- Providing and fixing in position C.I. dapuri steps or 22 mm dia. M.S. bar step with proper anchorage, etc. and providing and applying 3 coats of anticorrosive paint, etc complete as directed by Engineer-in-charge. |
| 10 | Subwork No.2:- SwitchRoom (Size - 2.50mX 2.50m) Item No. 1:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 11 | Item No.2:- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling,etc. complete. |
| 12 | Item No.3:- Providing and laying in situ cement concrete in M – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. |
| 13 | Item No.4:- Providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and water ing etc.complete. |
| 14 | Item No. 5:- Providing second class Burnt Br ick masonry wi th convent ional/I.S.type br icks in cement mortar 1:6 in superst ructure including striking joints, raking out joints, watering and scaffolding etc. Complete. |
| 15 | Item No. 6:- Providing and casiting in situ CC of trap /granite/quartzite/gneiss metal ofapprovedquality for R CCwork asper detailed drawing anddesigns or as diredcted by Engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withCM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete. Slabs b) In RCC M-200 |
| 16 | Item No. 7:- Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. |
| 17 | Item No. 8:- Filling the plinth & floors Murum bedding in trenches with approved murum from excavatyed materials form foundation15 cm. to 20 cm. layers including watering and compaction complete. |
| 18 | Item No. 9:- Providing and laying cement concrete flooring 40 mm thick wi th M15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. |
| 19 | Item No.10:- Providing and fixing frame wi th / wi thout ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete. |
| 20 | Item No. 11:- Providing and fixing Count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete. |
| 21 | Item No.12:-Providing and fixing Count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete. |
| 22 | Item No. 13:- Providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. |
| 23 | Item No. 14:- Providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. |
| 24 | Item No. 15:- Providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete. |
| 25 | Item No. 16:- Providing and fixing in position steel bar reinforcement of various diamenters for RCC piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) |
| 26 | Subwork No. 3:Solar Pump 3 BHP Item No.1 :-Supplying, Installing, Testing and commissioningof Standalone Solar submersible Pump set . All theabove benchmark cost are inclusive of total cost of system as per MNRESpecifications and its installation, commissioning , transportation , insurance , warranty/Gurantee, monitoring and maintaince for 5 years. |
| 27 | Subwork No.4:-Pumping Machinary 3 HP PumpsetItem No. 1:- Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages |
| 28 | Item No. 2:- Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. 3 core 10sqmm |
| 29 | Item No. 3:-Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380-440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 30 | Item No. 4:-Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for 7.50HP and 12.50BHP pump etc.complete. (Market rate) |
| 31 | Item No. 5:- Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. Pressure gauge (100 mm dia) |
| 32 | Item No. 6:- Providing tools for pumping. |
| 33 | Item No. 7:- Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) |
| 34 | Item No. 8:- Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 35 | Subwork No. 5:-Inline Water Filter Plant @ Ex.GSR Item No.1 Designing (aesthetically), providing, Inline Water Treatment Plant At the shop transporting to site installing testing andcommissioning at the site, giving necessary one month’s free test and trial run with guarantee for one year,etc.complete. Prefabricated Package Water Treatment Plant comprising following ) A. DESIGN BASIS. MAXIMUM FLOW RATE 15 M3 / 30M3 HR BASE TURBIDIDTY 25 PPM ( MAX )OUT PUT TURBIDITY BELOW 5 PPM MAX. ( COMMERCIAL ZERO ) B. VESSEL .MODEL NO VARTEXSF 1823 DDIMENSIONS1200 X 1250 HOSHEIGHT OF SHELL1250 MM(1.5 METERS)DIAMETER OF SHELL 1200 MM (1.2 METERS )DISH THICKNESS 6 MMSHELL THICKNESS 6 MMSURFACE PREPARATION GRINDING WITH 2 COATS OF RED OXIDE AND EPOXY PAINT EACH ( FOOD GRADE ) METALLURGY MILD STEEL IS-2062C. FRONTEL PIPING.PIPE SIZE 2 INCH ID.PIPE MAKE ZENITH / JINDALTYPE ERW C CLASSFLANGES E-TABLEVALVES 2 INCH BUTTERFLY 5 NOS.4. SAND MEDIA .MEDIA QUANTITY 5000 KGS ( APPX)MEDIA TYPE FILTRATION MEDIA WITH 99% SILICA CONTENTS 5. OPERATING1DISTRIBUTOR TYPE BOTTOM :- header & lateral2DISTRIBUTOR TYPE TOP :- INVERTED BELL MOUTH.The rates are as under : 1. 15 Cum / Hr. |
| 36 | Subwork No. 6: Rising Main Dia. 63 mm 8.0 Kg/cm2 HDPE pipe L= 710 mItem No. 1:- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form. 63 mm Dia HDPE Pipe 8 kg/sqcm |
| 37 | Item No. 2:- of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 38 | Item No. 3:- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete PN -1 (Without by pass)Sluice valves 65 mm Dia |
| 39 | Item No. 4:- Providing and supplying ISI mark CIDF/reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)Without by pass arrangement - PN -1.6Reflux valves 65 mm Dia |
| 40 | Item No. 5: Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991. Sluices valves 65 mm Dia for washout |
| 41 | Item No. 6:- ProvidingandsupplyingAirvalvesasperIS-10845and MJP’s standard specifications of approved mark and quality offollowingdiametersincludingalltaxes (Central andlocal),railwayfright,inspectionchargesunloading fromrailwaywagons,loadingintotruck,transportation upto departmental stores/ site, unloading and stacking etc. complete. Air valve 25 mm Dia |
| 42 | Item No. 7:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (EARTH SOIL) |
| 43 | Item No. 8:- Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (HARD MURUM) |
| 44 | Item No. 9:- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (SOFT ROCK) |
| 45 | Item No. 10:-Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) |
| 46 | Item No. 11:- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. |
| 47 | Item No. 12: Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II63mm Dia HDPE Pipe 8 Kg/sqcm |
| 48 | Item No. 13:- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Sluice Valve 65 mm Dia |
| 49 | Item No. 14:- Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves) Reflux valves 65 mm Dia |
| 50 | Item No. 15:- Lowering laying and jointing inposition following C.I.D.F/ Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc. complete. (Rate for all class of sluice valves) Sluice valves 65 mm dia for washout |
| 51 | Item No. 16:- Lowering, Layingand fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. Air valves 25 mm Dia |
| 52 | Item No. 17:- Providingandfixinginpositionairvalveshaftincluding providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providingPCCblockofM-150concrete150mmthick aroundtheairvalveteeincludingencasingofvertical shaft in PCC M-150 as shown in type design together with providingandmakingflangedjointswhereverrequired and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) upto 150 mm on Murum & harder strata |
| 53 | Item No. 18:- ProvidingandlayinginsitufollowinggradesofC.C.of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. b) 1:2:4 (M-150) grade for encasing |
| 54 | Item No. 19:- ProvidingandconstructingB.B. masonryvalvechamber with 15 cm thick 1:3:6 proportion PCC bedding, including excavation, B.B. masonry in C.M. 1:5proportion 12 mm thickcementplasterincm1:4proportiononbothsides with providing and fixing C.I. manhole frame and cover in RCC1:2:4copingorcmthickslabetc. completeas directed by Engineer-in-charge.Size 1.20 x 1.20 x 1.20 |
| 55 | Item No. 20:- Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. complete |
| 56 | Item No. 21:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.63 mm Dia HDPE Pipe 8 Kg/sqcm |
| 57 | Subwork No. 7:- Misc Works (Provision for Electricity) Providing & streching transmission line & making Additional electric load connection to Head works, including all charges as per MSEB rule |
| 58 | Subwork No.8:- Trial RunCommissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.Note: Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department.For single village without WTPFor 1 Month 26244 x 01 Months |
| 59 | 12 % G.S.T |
AI Tender Summary
Tender Timeline
Sep 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender