Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-09-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-09-2022 |
| 2 | 15-09-2022 | AMENDMENT | Other | 22-09-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling of floor hearth and wall tilling including mortar bedding removing unserviceable tiles to store and rubbish off the premises as directed by the Engineer-in-Charge. |
| 2 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified. |
| 3 | Material & Labour for ColouredNon Skid Ceramic of approved shade and pattern,of size 600mmx600mmx9 to 10mm (exceeding 0.18 Sqm but not exceeding 0.38 Sqm each)thick joint less as in floor set and jointed in cement slurry, over 15mm thick screed in cement mortar (1:6) and pointed with epoxy grouted with suitablepigment (mixed with white cement) to match the colour of tiles complete all as specified. |
| 4 | Material & Labour for Ceramic tiles of approved shade and pattern, of size 600mmx100mm to 120mmx9 to 10mm thick joint less as in floor set and jointed in cement slurry, over 15mm thick screed in cement mortar (1:4) and pointed with epoxy grouted with suitable pigment (mixed with white cement) to match the colour of tiles as in skirting /dado etc complete all as specified. |
| 5 | Material & Labour for non-skid ceramic tiles, coloured (of approved shade and design), 7 to 8mm thick, of superior quality, square / rectangular 400mmx400mm x7mm thick (area exceeding 0.11 Sqm but not exceeding 0.18 Sqm) , as in floors, etc, set and jointed in neat cement slurry and pointed withcolouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 6 | Material & Labour for for non-skid ceramic tiles, coloured (of approved shade and design), 7 to 8mm thick, of superior quality, square / rectangular 300mmx300mm x6mm thick (area exceeding 0.06 Sqm but not exceeding 0.11 Sqm) , as in floors, etc, set and jointed in neat cement slurry and pointed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 7 | Material & Labour for Glazed ceramic tiles, coloured (light colour as approved), of size300x 600 x7mm/ 350x250mm x 7mm / 450X 350X 7mm/300mmx200mmx7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified |
| 8 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry bedded in any mortar complete all as specified. |
| 9 | Material & Labour for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:6) complete all as specified. |
| 10 | Material & Labour for 18 to 20mm thick Granite (of any type ) tiles machine cut, in skirting/dado etc,laid over cement screed ( 1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified. |
| 11 | Material & Labour for water proofing treatment to existing RCC roof slab including preparation of surfaces parapet comprising with the following course of treatment/ specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) One layer of C polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.0 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 160 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm minimum and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing, (Note: - (i) Laying of APP based membrane shall be done by torch on method or as per manufacturer’s instruction.(ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturer’s instruction. (c)Laying of Standard APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm), complete all as specified and directed by Engineer in Charge. |
| 12 | Material & Labour for 10 mm thick(average )plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane,add WPC @3% of cement weight including WPC,finished even and smooth without using extra cement complete all as specified and as directed.(Note:- Polymeric membrane will be measured and paid separately) |
| 13 | Dismantling Single layer Mangalore pattern or similar tiles in roofing including removal of vegetation etc complete all as specified and as directed by Engineer in Charge. |
| 14 | Dismantling Single layer Mangalore pattern or similar tiles in roofing including removal of vegetation for portions bedded in lime or cementmortaretc complete all as specified and as directed by Engineer in Charge. |
| 15 | Material & Labour for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry with any height of roof, including necessary scaffolding etc complete all as specified and as directed by Engineer in Charge. |
| 16 | Refixing Existing Mangalore pattern Roof tiles, interlocking at side joints, laid dry with any height of roof, including necessary scaffolding etc complete all as specified and as directed by Engineer in Charge. |
| 17 | Material & Labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1: 3 or cement mortar 1:6 complete all as specified and directed. |
| 18 | Supply and fix in repair (including dismantling existing battens, shingles etc) 2nd class hard wood clean sawn battens exceeding 15 and not exceeding 25 sqcm in section for laying roof tiles at 20 cm center to centre, complete all as specified and directed by Engineer in Charge. |
| 19 | Supply and fix in repair to (Dismantling timber scantling in any position with nails etc) 2nd class hard wood clean sawn, as in scantling in work complete all as specified and directed. |
| 20 | Supply and fix in repair to 20mm thick second class hard wood boarding clean swan with butt joint, fixed with nails in any situation and height including dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed by the Engineer-in -Charge. |
| 21 | Dismantling plain or corrugated steel sheeting, any gauge, thicknesses, including Nainital or similar pattern roof covering nails etc complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material & Labour for 0.63mm thick CGI sheetas in roof coverings with normal zinc coating of 275 gm/Sqm with two corrugation side lap (and not less than 150mm end laps) fixed with galvanized crank \"J\" or \"L\"hook bolts and nuts not less than 8mm dia including embossed galvanized washers and bituminous washers complete all as specified and directed. |
| 23 | All as per Serial item No 22 but for except sheet any type |
| 24 | Supply & Fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550MPa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 25 | All as per Serial item No. 24 but for galvalume aluminium zinc coating GI based plain steel sheet 0.50mm. |
| 26 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 27 | Supply & Fix structural steel work in tubular trusses and as in purlin, rafter etc on roof including special shaped washer etc or including butt welded tubes conforming to IS:1161-1979 grade St-240 complete all as specified and as directed. |
| 28 | Supply and fixing of Mild steel work for wind tie for roof including drilling, bolting or riveting etc, and similar works confirming to Fe-290 Grade E-165 complete all as specified. |
| 29 | Dismantling of ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs and blankets any thickness, including cover fillets complete all as directed. |
| 30 | Supply & Fix in Gypsum Board 12mm thick as in false ceiling fixed with screw as per manufacturer’s instructions complete all as specified and directed. (Frame work & hangers for ceiling shall be measured and paid separately) |
| 31 | All as per Serial item No. 30 but Except Gypsum Board. |
| 32 | Material & Labour for Anodised aluminium snap grid frame work for false ceiling and Hangers 4 mm dia.(upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 33 | Material and labour of 4mm thick Non asbestos fibre cement building boards fixed in ceiling with screws complete all as specified and as directed. |
| 34 | Taking down shutters exceeding 1 Sqm not exceeding 2 Sqm each and refixing with same opening after Re securing or easing &adjusting /cutting with a required repaircomplete all as specified and as directed. |
| 35 | Taking down shutters not exceeding 1 Sqm each and refixing with same opening after Re securing or easing & adjusting /cutting with a required repaircomplete all as specified and as directed. |
| 36 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutter from the frame) and removing material from the site complete all as specified and directed. |
| 37 | All as per Serial item No 36 but not exceeding 1.0 Sqm each. |
| 38 | Taking down shutter of any description exceeding 1.0 Sqm not exceeding 2 sqm each. |
| 39 | Material & Labour for 30 mm thick well seasoned 2nd class hard wood glazed and skeleton shutters as peropen rebated and prepared to receive glass, gauge etc without sash bar, edge of framing plain chamfered or rounded mitered beads for securing glass any numbers as specified in clause 8.24 (a) of MES Schedule Part-I Section-8complete all as specified and directed. |
| 40 | Material & Labour for 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed. |
| 41 | Material & Labour for2nd class hard wood well seasoned plain solid straight chowkhats framed wrought framed, rebated on the solid, round or chamfered put together with glue and pinned at joint and fixed in wall complete all as specified and directed. |
| 42 | Supply & Fix 25 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified |
| 43 | Supply & Fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples as ordered complete all as specified and directed. |
| 44 | All as per Serial item No 43 but in repair. |
| 45 | Hacking out old broken glass (any thickness, size, quality) from wooden frames, glazed with putty or fixed with beads complete as directed by EIC. |
| 46 | Supply & Fix 4mm thick sheet glass selected quality and glazing with oil putty/beading in squares or rectangular in squares not exceeding 0.5 Sqm each pane complete all as specified and directed |
| 47 | Dismantling of ceiling boards (Fibre, pulp, insulation etc) of any thickness/description, including cover fillets fixed in any position with screws complete all as specified and directed. |
| 48 | Supply & Fix 18 to 19mm thick pre-laminated particle board (including dismantling ), flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cupboard shutter , shelves etcincluding 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edgingcomplete all as specified. |
| 49 | Supply & Fix 25 mm thick pre-laminated particle board (including dismantling), flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cupboard shutter , shelves etcincluding 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edgingcomplete all as specified. |
| 50 | Supply & Fix300 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing and sliding bolt of extruded section and fixed to shutter with screw complete all as specified and directed. |
| 51 | Supply & Fix 125 mm long aluminiumanodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 52 | Supply & Fix 75 mm long aluminiumanodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 53 | Supply & Fix 125 mm long aluminium door handle cast type fixed to shutter with screw complete all as specified and directed. |
| 54 | Supply & Fix 75 mm long aluminium door handle cast type fixed to shutter with screw complete all as specified and directed. |
| 55 | Supply & Fix Stainless Steel butt hinges 100mm long cold rolled medium weight complete all as specified and as directed. |
| 56 | Supply & Fix 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 57 | Supply & Fix Continuous (piano) hinges, mild steel, bright finish or electro galvanised in width of the flaps 30 to 40mm complete all as specified and as directed |
| 58 | Supply & Fix 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed |
| 59 | Supply & Fix 1mm thick stainless steel sinks with drainage board made of kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 60 | Supply & Fix 1mm thick stainless steel sinks with drainage board made of kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 61 | Taking down eaves gutters and rainwater pipes, drain pipes etc(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified |
| 62 | Supply & Fix PVC (SWR or Drain) pipes 110mm bore, single socketed, in any length, with rubber ringsfixed with necessary clamps complete all as specified and as directed. |
| 63 | Supply & Fix PVC (SWR or Drain) pipes 75mm bore, single socketed, in any length, with rubber ringsfixed with necessary clamps complete all as specified and as directed. |
| 64 | Supply & Fix 100mm to 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified. |
| 65 | Supply & Fix 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified. |
| 66 | Supply & Fix PVC (SWR) floor trap upto 75mm outlet , plain with grating including jointing with solvent cement including set with Cement Mortar(1:4) complete all as specified. |
| 67 | Supply & Fix Stainless steel plate rack of size 900x750x250mm complete all as specified & directed |
| 68 | Supply & Fix in repair to Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete fitting with all necessaryaccessoriescomplete all as specified and directed. |
| 69 | Supply & Fix Vitreous China wash down water closet pan(European type) with P or S trap, snow white or whitecolour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat coveras in repair completeall as specified and directed. |
| 70 | Supply & Fix Vitreous china wash hand basin white flat back of size 550x400 mm ,including brackets, waste coupling and waste pipe , or fixed with existing platform surfaces with sealant with white cement etccompleteall as specified and directed. |
| 71 | Supply & Fix in repair to 10 litres, cast iron, valve less syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and bracketsIWC/EWC OR Angelo Indian typeinclusiveof brackets , and connections to pipes and fixing of chain and pull, or lever, if any complete all specified and as directed |
| 72 | Supply & Fix in repair Looking mirror fancy type of selected quality glass area exceeding0.35 Sqmin each pane and fixing withtiled wall surfaceswith 4 corner holes ,fixed withCP or SS Cleats /PVC rawl plugs withchromium plated brass screws and cup washers complete all as specified |
| 73 | Supply & Fix Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,MS stay shall be provided at the bottom to steady the frame as in repair ( includingtaking Down unserviceable old PVC /UPVC/FRP Door shutters ), complete as specified by the manufacturer and as per directions of Engineer-in-charge |
| 74 | Material & Labour for factory made solid single extruded panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gape inside for top rail and bottom rail: paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed PVC the style & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. |
| 75 | Demolition of unreinforced cement concrete of any descriptioncomplete all as specified and directed. |
| 76 | Material & Labour for Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate in roof and parapet wall junction ,post holes filling, roof/chajjabenching, kerbs, mud stop, coping, rounded or chamfered on edges, filling rails embedded sec ,hold fast etc including form work complete all as specified and as directed |
| 77 | Material & Labour for Cement concrete as in foundations, filling and mass-concrete ,floor sub base ,post holes , sunken portionetc,using type C2 1:3:6 (40mm graded aggregate) complete all as specified and as directed |
| 78 | Material & Labour for 50mm thick Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection, floor topping etc, surfaces finished of concrete flooring with brooming complete all as specifiedincluding provision of necessary construction joints complete all as directed by Engineer-in-Charge |
| 79 | Demolition of brick work/solid block workbuilt in cement mortar including all quoins, pillars etc, complete all as specified and as directed |
| 80 | Material & Labour for Pre-cast cement concrete block masonry with solid block type C1, (1:3:6) (20 mm graded aggregate) setting in CM 1:6 complete all as specified and directed. |
| 81 | Material & Labour for precast cement concrete solid building block or slabs type C1, 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in CM 1:4 complete all as specified and directed. |
| 82 | Taking down cement plaster or brick or stone wall including raking out joints, hacking for key scrubbing down with water complete all as specified and directed. |
| 83 | Material & Labour for Rendering 15 mm thick on concrete surface in CM 1:6 on walls even and smooth without using extra cement complete all as specified and directed. |
| 84 | Material & Labour for Rendering 15 mm thick on concrete surface in CM 1:4 on walls even and smooth without using extra cement complete all as specified and directed. |
| 85 | Supply only Integral water proofing compound. |
| 86 | Material and Labour for preparation of new plastered surfaces of wall and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete as per manufacturer\"s specification and as directed. |
| 87 | Complete removal of existing treatment by preparation of old decorated surfaces (White/Colour wash/distemper) of walls including cornices plasters etcincluding washing rubbing & scraping down and applying two coat of acrylic based distemper over a coat ofalkali resistant (acrylic based) complete all as specified. |
| 88 | Material and Labour for preparation of new plastered surfaces of wall and applying priming coat of exterior primer applied @ 2.20 kg/10 sqm andfinishing walls with two coat of Acrylic Smooth exterior paint of required shade @ 1.67 litre/10 sqm complete as per manufacturer\"s specification complete all as specified and as directed. |
| 89 | Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces exceeding 10 cm width or girth after preparation of surfaces complete all as specified and as directed |
| 90 | Material & Labour for two coat of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces over 10 cm width or girth complete all as specified and as directed. |
| 91 | Material & Labour for Applying greasing / Oiling and aligning in Existing Steel Rolling Shutters in any height and width with smooth Workable/rolling conditions as in Rolling Shutters Without Taking Off shutters complete all as specified and directed. |
| 92 | Supply and Fix in repair Towel rail 600mm long of PTMT fixed with and including CP brass crews and wooden/plastic cleats complete all as specified and as directed |
| 93 | Supply and Fix in repair shelf of PTMT (Minimum weight 300gms) fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed |
| 94 | Supply & Fix in repair PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed |
| 95 | Supply & Fix in repair to Grating round 140 mm size of PTMT/CP(Minimum weight 50gms) complete all as specified and as directed |
| 96 | Supply & Fix in repair aluminium extruted body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 97 | Supply & Fix in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm cover plate fixed in floor complete all as specified and as directed |
| 98 | Attending internal/External electric complaints for maintenance/breakdown round the clock for maintenance, Checking, Fault finding and rectification of fault in LT Panels/Overhead HT/LT Lines, HT/LT underground cables, Transformers, Switchgears internal electric faults, geysers, fans etc including internal/external water supply complaints and carry out repairs and resume electric supply and water supply complete all as specified and directed by Engineer-in-Charge. |
| 99 | Notes: - (a) Day to day complaint rectified by the electrician shall be written in complaint register and complaint document slip, rectified complaints only shall be measured and paid. Complaint attender shall have minimum qualification of ITI electrician cum plumber having 2 years experience of same nature of work is to be employed.(b) The Spares required for rectification of faults shall be measured under relevant items.(c) All necessary Tools shall be available with the contractor while executing the compliant.(d) All consumables other than mentioned in Schedules are deemed to be included in the rate quoted. (e) All kind of transport for the complaint attender/materials and mobile / cell charges are deemed to be included in the rate quoted.(f) All safety aspects are to be taken and if any accident/hazardous incidents happen during execution shall be the sole responsibility of the Contractor.(g) Penalty of Rs 2000.00/complaint will be recovered from contractor if the complaint will not rectified within 24 hours. |
| 100 | Supply only switch piano, flush type, 6 Amps, SP, one way. |
| 101 | Supply only switch piano, flush type, 6 Amps, SP, two ways. |
| 102 | Supply only bell push, flush type, 6 Amps. |
| 103 | Supply only socket outlet, flush type, 6 Amps, 2/3 pin. |
| 104 | Supply only switch socket combination, flush type,2 in 1, 06Amps. |
| 105 | Supply only switch socket combination 5 in 1, 6/16Amps, flush type, multipurpose. |
| 106 | Supply only plug top, 3 pin 16 Amps, 240V, Bakelite body. |
| 107 | Supply only call bell, AC, 230 Volts, single pole. |
| 108 | Supply only stepped type electronic fan regulator, flush type, hum proof, AC, 240 Volts, 5 step, two module. |
| 109 | Supply only stepped type electronic fan regulator(dimmer) flush type, hum proof, AC, 240 Volts, single module. |
| 110 | Supply only lamp holder, pin type, insulated body with back plate suitable for batten fittings, AC, 240V. |
| 111 | Supply only LED tube light fitting, 1x20W, 230V,with extruded aluminium housing and high quality PC Diffuser,efficieacy of 110/125 Lumen/watt . |
| 112 | Supply only LED tube light fitting, 1x10W, 230V,with extruded aluminium housing and high quality PC Diffuser,efficiency of100 Lumen/watt . |
| 113 | Supply only LED Tube lamp suitable for 4 feet, 18/20W. |
| 114 | Supply only CIMFR certified LED flameproof batten suitable for twin T8/T5 tube of 20W, Recommended for gas/Vapor group of llA & IIB and Zone 1 & 2, IP65 Protected. |
| 115 | Supply and fix CIMFR certified LED flameproof batten suitable for single T8/T5 tube of 20W, Recommended for gas/Vapor group of llA & IIB and Zone 1 & 2, IP65 Protected. |
| 116 | Supply and fix CIMFR certified LED fitting flameproof 60W Well glass in die cast aluminium housing with heat resistant toughened glass. Recommended for gas/Vapor group of llA & IIB and Zone 1 & 2, IP 65 Protected. |
| 117 | Supply only modular switch one way, 6A, one module. |
| 118 | Supply only modular switch two way, 6A, one module. |
| 119 | Supply only modular bell push, 6A, one module. |
| 120 | Supply only modular socket, 6 Amps, 2/3 pin combined, two module. |
| 121 | Supply only modular socket, 6/16 Amps, 2/3 pin combined, two module. |
| 122 | Supply only modular step fan regulator 120W, two module. |
| 123 | Supply only flame proof Switch socket & Plug combined in LM6 cable termination box in LM6, 16 A, 250V, 2P+earth. |
| 124 | Supply only Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V. |
| 125 | Supply only MCB SP, 6 to 32 Amps, 220 Volts, 10 KA,\"C\" series. |
| 126 | Supply only MCB SPN 25 to 32 Amps,220 Volts, 10 KA,\"C\" series |
| 127 | Supply only MCB TPN 63 Amps, 415 Volts, 10/16 KA,\"C\" series. |
| 128 | Supply only RCCB, double pole, 25A, 30mA. |
| 129 | Supply only RCCB, four pole, 63A, 30mA. |
| 130 | Supply only LED tube light fitting 2x2 feet, 36W, 230V,with CRCA powder coated housing and high quality PC Diffuser,efficiency of 125 Lumen/watt THD<10, L70 B50, PF>0.95, with separate driver module complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 131 | Supply only Capacitor 2.5/3.15/4 MFD, 240V, AC suitable for fans. |
| 132 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed |
| 133 | Material and labourfor pointwiring on surface/ceiling/Trusses/existing concealed conduit with1.5 sqmm PVCinsulated unsheathedsinglecore multistranded copper conductor cable, FRLS, ISI markeddrawn through and including PVC conduit of suitable size and all accessories, fire resistant, ISI markedincluding 2 mm thick and 60mm depth GI sheet pressed terminal box ( recessed) with 3 mm thick laminated hylum sheet top cover including 1.50 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity conductor and making good the disturbed surfaces of walls, floors, ceiling etcall as specified and directed for One light point controlled by one switch. |
| 134 | Ditto as per item No 132 but for One ceiling fan point controlled by one switch. |
| 135 | Ditto as per item No 132 but for One exhaust fan point controlled by one switch. |
| 136 | Ditto as per item No 132 but for One 3 pin 5 Amps socket outlet controlled by one switch on independent board. |
| 137 | Ditto as per item No 132 but for One 3 pin 5 Amps socket outlet controlled by one switch in the same board with other switches. |
| 138 | Ditto as per item No 132 but for One bell/buzzer point controlled by one bell push in the same board with other switches or independent. |
| 139 | Ditto as per item No 133 but for One light point controlled by 2 Nos two way switches. |
| 140 | All as per item No. 132 above but with 2.5 Sq mm cable for for one 3/5 pin socket outlet 15 Amps on the independent board. |
| 141 | Material and labourfor pointwiring on surface/ceiling/Trusses/existing concealed conduit with1.5 sqmm PVCinsulated unsheathedsinglecore multistranded copper conductor cable, FRLS, ISI markeddrawn through and including stove enameled steel conduit of suitable size and all accessories, fire resistant, ISI markedincluding 2 mm thick and 60mm depth GI sheet pressed terminal box ( recessed) with 3 mm thick laminated hylum sheet top cover including 1.50 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity conductor and making good the disturbed surfaces of walls, floors, ceiling etcall as specified and directed for One light point controlled by one switch. |
| 142 | All as per item No. 140 above but with 4 Sqmm cable for for one 3/5 pin socket outlet 15 Amps on the independent board. |
| 143 | Supply & Fix in repair flame proof Switch socket & Plug combined in LM6 cable termination box in LM6, 16 A, 250V, 2P+earth. |
| 144 | Supply & Fix in repair Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified directed. |
| 145 | Supply & Fix in repair switch piano, flush type, 6 Amps, SP, one way, all as specified and directed. |
| 146 | Supply & Fix in repair switch piano, flush type, 6 Amps, SP, two ways, all as specified and directed. |
| 147 | Supply and fix in repairs bell push, flush type, 6 Amps, all as specified and directed. |
| 148 | Supply and fix in repairs switch socket combination 2 in 1 6Amps, flush type, all as specified and directed. |
| 149 | Supply and fix in repairs switch socket combination 5 in 1, 6/16Amps, flush type, multipurpose, all as specified and directed. |
| 150 | Supply and fix in repairs Ceiling rose, 3 phase/PVC/polycarbonate, isolated body, all as specified and directed. |
| 151 | Supply and fix in repairs call bell, AC, 230 Volts, single pole, all as specified and directed. |
| 152 | Supply and fix in repairs,stepped type electronic fanregulator, flush type, hum proof, AC, 240 Volts, 5 step all as specified and directed. |
| 153 | Supply and fix in repairs lamp holder, pin type, insulated body with back plate suitable for batten fittings, AC, 240V, all as specified and directed. |
| 154 | Supply and fix in repair LED tube light fitting, 1x20W, 230V,with extruded aluminium housing and high quality PC Diffuser,efficiency of 110/125 Lumen/watt all as specified and directed. |
| 155 | Supply and fix in repair LED tube light fitting, 1x10W, 230V,with extruded aluminium housing and high quality PC Diffuser,efficiency of 100 Lumen/watt all as specified and directed. |
| 156 | Supply and fix CIMFR certified LED flameproof batten suitable for single T8/T5 tube of 20W, Recommended for gas/Vapor group of llA & IIB and Zone 1 & 2, IP65 Protected all as specified and directed. |
| 157 | Material and labour for sub main wiring with 4 runs of single core 4 Sq mm PVC insulated unsheathed multistraded copper conductor cable, FRLS, ISI marked and two run of 4 Sq mmmultistranded insulated copper conductor cable, FRLS, ISI markedas earth continuity conductor drawn through and including PVC conduit of suitable size and all accessories, not less than 2mm thick, fire resistant, ISI marked and making good the disturbed surfaces of walls / floors / ceiling etc and including removing the existing aluminium sub main wiring cable, all as specified and directed.Note : 4 Runs of PVC wires of 4 sqmm and 2 run of 4 sqmm earth wire and one run conduit will be measured as one unit. |
| 158 | Material and labour for sub main wiring with 2 runs of single core 4 Sq mm PVC insulated unsheathed multistraded copper conductor cable, FRLS, ISI marked and one run of 4 Sq mmmultistranded insulated copper conductor cable, FRLS, ISI markedas earth continuity conductor drawn through and including PVC conduit of suitable size and all accessories, not less than 2mm thick, fire resistant, ISI marked and making good the disturbed surfaces of walls / floors / ceiling etc and including removing the existing aluminium sub main wiring cable, all as specified and directed.Note : 2 Runs of PVC wires of 4 sqmm and 1 run of 4 sqmm earth wire and one run conduit will be measured as one unit). |
| 159 | Ditto all as per item Sl Item No 157 but drawn through ERW Steel conduit |
| 160 | Supply and fix in repairs sheet metal enclosure for MCB DB TPN 4 ways, 415V with 200 Amps bus bar, double door, all as specified and directed. |
| 161 | Supply and fix in repairs sheet metal enclosure for MCB DB SPN 4 ways, 240V with 200 Amps bus bar, double door, all as specified and directed. |
| 162 | Supply and fix in repairs sheet metal enclosure for MCB DB SPN 8 ways, 240V with 200 Amps bus bar, double door, all as specified and directed. |
| 163 | Supply and fix in repairs sheet metal enclosure for MCB DB SPN 12 ways, 240V with 200 Amps bus bar, double door, all as specified and directed. |
| 164 | Supply & Fix in repair thermoplastic polycarbonate Energy meter enclosures with hinged lid and plane side, walls - environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anticorrosive, degree of Ingress Protection IP 65 in accordance with IEC 60529, gasket material of enclosure is Polyurethane; while the gasket is internally embedded for single phase one meter ofsize 600 x 300 x 170 mm complete all directed. |
| 165 | Ditto all as per item Sl Item No 163 but of size 600 x 600 x 170 mm. |
| 166 | Taking down and refixing of electric energy meter single phase including all fixing accessories complete. |
| 167 | Supply and fix in repairs MCB SP, 6 to 32 Amps, 220 Volts, 10 KA,\"C\" series complete all as specified and directed. |
| 168 | Supply and fix in repairs MCB SPN 25 to 32 Amps,220 Volts, 10 KA,\"C\" series complete all as specified and directed. |
| 169 | Supply and fix in repairs MCB TPN 63 Amps, 415 Volts, 10/16 KA,\"C\" series complete all as specified and directed. |
| 170 | Supply and fix in repairs RCCB, double pole, 25A, 30mA complete all as specified and directed. |
| 171 | Supply and fix in repairs RCCB, four pole, 63A, 30mA complete all as specified and directed. |
| 172 | Supply and fix in repairs SPN sheet metal enclosure with a two pin and earth plug and socket complete with one MCB SP 10 Amps, and connecting complete, all as specified and directed. |
| 173 | Supply and fix in repairs TPN sheet metal enclosure with a three pin and earth plug and socket complete with one MCB TP 63 Amps, and connecting complete, all as specified and directed. |
| 174 | Material and labour for Earthing with galvanised MS earth plate of size 600 x 600 x 6 mm thick buried directly in ground not less than 2.25 metre below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth lead wire of 4 mm thick, soldered and riveted to earth plate.The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20 mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 metre etc complete all as specified and shown in electrical plate No 3 of SSR Part I - 2009. Note: - Main earthing lead from earth plate to test point & up to 7.5 metre to be provided. The cost for the same shall be deemed to be included in the above quoted rate. |
| 175 | Disconnecting and taking down fans, any size, any make, from various satellite area locations, for repair /painting / replacement of defective parts and re-hanging/re-fixing in its original location after reconditioning, complete as specified and directed for Ceiling Fan 1200mm/1400 mm Sweep, Wall fan upto 450 mm and exhaust fan upto 450 mm sweep.Note: - Items for reconditioning will be measured and paid separately. |
| 176 | Material and labour for Painting of ceiling fans of any size complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete as specified & directed |
| 177 | Ditto as per item No 175 But forWall Fan/Exhaust fan upto 450mm Sweep |
| 178 | Material and labour forremoving the burnt out winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, varnishing, drying etc, replacement of body screws, testing and commissioning on full load for 8 hours continuous running, for Ceiling Fan 1200mm/1400mm Sweep complete as specified anddirected. Note: - Items for reconditioning will be measured and paid separately. |
| 179 | Ditto as per item No 177 But forWall Fan/Exhaust fan/Pedestal fan upto 450mm Sweep |
| 180 | Supply and Fix in repair Capacitor 2.5/3.15/4 MFD, 240V, AC suitable for fans, all as specified and directed. |
| 181 | Supply and replace ball bearing made out of high carbon steel, as per existing, suitable for any type, any make, any sizefan,all as specified anddirected. |
| 182 | Supply and replacebush bearing, made out of brass alloy, as per existing, suitable for any type, any make, any size of cieling fan,all as specified anddirected. |
| 183 | Supply and replace down rod, suitablyholed, made out of 15mm dia GI tubes, duly painted, 300mm long, suitable for ceiling fansany type, any make, any size,all as specified anddirected. |
| 184 | Supply and replacenut, bolt, split pin made out of nickel plated mild steel with rubber reel insulator, suitable for ceiling fansany type, any make, any size, including dismantling old one all as specified anddirected. |
| 185 | Supply and replace, bakelite body nichrome connectors, 2 way, with fixing screws of suitable size for ceiling fans of any type,including dismantling old one all as specified anddirected. |
| 186 | Supply and replace 1100 Volts grade PVC flexible twisted twin core cable with multistranded copper conductor of size 23/0.0076, all as specified anddirected. |
| 187 | Taking down defective Geyser of capacity 25/ 50 litres of any make from its existing position after disconnecting inlet/outlet water connection and opening of geyser for checking and repairing the defective partsincluding testing the same after repairing re-fixing the same on its existing position and making connection inlet/outlet water connection complete all as specified and directed. Notes:- (i)The replaced defective parts will be measured and paid separately as supply only itemsunderthe relevant items of this BOQ(ii)Labour charges required for replacement of spares shall deemed to be included in the unit rate quoted by the tenderer.(iii) Items for reconditioning will be measured and paid separately. |
| 188 | Supply and replace Heating element any type for 1.5KW/2KW capacity, 240V, AC,with heat resistant rubber washer complete, all as specified and directed. |
| 189 | Supply and replace indicator lamp round/rectangular type, standard quality AC, SP, 230 V suitable for 25/50 liters capacity geysers any type, 240 volts, AC red or green complete, all as specified and directed. |
| 190 | Supply and replace fusible plug with internal or external threading suitable for geysers of capacity 25/50 liters, all as specified and directed. |
| 191 | Supply and replace non-return valve, made out of brass 15mm bore, all as specified and directed. |
| 192 | Supply and replacePVC sheathed, multi stranded copper conductor, 3 core, flexible cable, 1100 V grade, size 40/0.0076, AC and connecting complete, all as specified and directed. |
| 193 | Material & Labour for Painting of geysers complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed. |
| 194 | Material and labour for making 4 Nos of holes in wall, grouting 4 Nos rag bolts of size 125mm long x 12mm dia with PCC including necessary nuts and washers for 25/50 Litres capacities of geyser on wall complete all as specified and directed. |
| 195 | Supply and replace inner assembly made out of brass with chromium plating, suitable for any type of Geysers for 25/50 Litres capacities all as specified and directed. |
| 196 | Material and labour for filling the glass wool between outer cover and inner tank of Geysers, 50/25 litres capacity, horizontal / vertical, including removing the old one complete all as specified and directed. |
| 197 | Supply and fixmetallic outer cover including bottom and top cover duly spray painted with 2 coats of synthetic enamel paint over a coat of red oxide chromate primer, suitable for any type of geyser for 25/50 Litres capacities complete all as specified and directed. |
| 198 | Supply and replace inner tank made out of copper alloy, suitable for any type of geyser, for 25/50 Litres capacities complete, all as specified and directed. |
| 199 | Material and labour for repairs to metallic inner tank, arresting the leakage by welding, brazing etc, pressure testing after repairs, for any type of geyser for 25/50 Litres capacities complete all as specified and directed. |
| 200 | Supply and replace pressure / air release valve suitable to fix in inlet of geyser, made out of brass 15mm bore, all as specified and directed. |
| 201 | Material & Labour for disconnecting from position,servicing at same location including cleaning of interior parts and body with solvent materials, replacement of unserviceable spares / parts if required, necessary repairs, Installing at its original location, Connecting, Testing and commissioning of water cooler upto 120 litres, Ozone based filter type hot and cold water cooler 85 litres capacity, Refrigerator upto 310 litres capacity all as specified & directed. Note:- Spares will be measured and paid separately |
| 202 | Material & Labour for disconnecting from position, Transporting to local workshop for servicing including cleaning of interior parts and body with solvent materials, replacement of unserviceable spares / parts if required, necessary repairs, Transporting back, Installing at its original location, Connecting, Testing and commissioning of water cooler upto 120 litres, Ozone based filter type hot and cold water cooler 85 litres cap, Refrigerator upto 310 litres cap all as specified & directed. Note:- Spares will be measured and paid separately |
| 203 | Material &Labour for Factory reconditioned hermetically sealed compressor unit suitable for water cooler upto 120 litres, ozone based filter type hot and cold water cooler 85 litres, Refrigerator upto 310 litres, Split type Air conditioner upto 3 TR for exchange of the existing unserviceable sealed compressor unit including initial charging of gas and oil all as specified & directed |
| 204 | Supply & Fix Condensing coil made out of copper tube and aluminium fins suitable for split ac upto 3TR, water cooler upto 120 litres, Refrigerator upto 310 litres including necessary brazing, gas charging, leak testing, Vacuumising etc all as specified and directed. |
| 205 | Supply & Fix Evaporator coil of made out of Copper tube suitable for Refrigerator of capacity upto 310 Litres |
| 206 | Supply & Fix D S Candle suitable for Hot and Cold water cooler |
| 207 | Supply & Fix Filter Carbon suitable for Hot and cold water cooler |
| 208 | Supply & Fix main board suitable for Hot and cold water cooler |
| 209 | Supply & Fix power supply PCB suitable for Hot and Cold water cooler |
| 210 | Supply & Fix Transformer suitable for Hot and cold water cooler |
| 211 | Supply & Fix Solenoid valve suitable for Hot and cold water cooler |
| 212 | Supply & Fix Pressure Pump suitable for Hot and cold water cooler |
| 213 | Supply and Fix Heater coil suitable for Hot and cold water cooler |
| 214 | Supply and Fix 3 Core multistranded Copper Conductor PVC insulated sheathed flexible cable of size 2.5Sqmm. |
| 215 | Ditto as per item No 213 but for 4.0Sqmm x 3 core |
| 216 | Supply and charging refrigerant gas up to required level including connected works such as pressure testing/Leak test with nitrogen before filling refrigerant gas complete for split AC upto 3 TR,water cooler upto 120 litres, ozone based filter type hot and cold water cooler 85 litres, Refrigerator upto 310 litres, all as specified and directed by Engineer-in-Charge |
| 217 | Material & Labour for servicing of Split AC indoor/outdoor unit upto 3 TR comprising through cleaning, lubricating of all moving parts, replacement of worn out screws, bolts, rectifying electric wiring defects etc to make the unit for smooth operation |
| 218 | Supply and replace compressor sealed unit of Split AC upto 3TR, water cooler upto 120 litres, ozone based filter type hot and cold water cooler 85 litres, Refrigerator upto 310 litres,replacement of copper tubing/capillary strainer etc including gas charging complete, testing and commissioning all as specified and directed by Engineer-in-Charge. Note: Cost of gas charging included in the quoted rates. |
| 219 | Supply and replace capacitors 6/10/36 mfd. |
| 220 | Supply and replace capacitors 80/100/120 mfd and 45 + 6 mfd. |
| 221 | Supply and replace starting relay suitable for Split AC upto 3TR, Water cooler upto 120 litres, Refrigerator upto 310 litres capacity. |
| 222 | Supply and replace thermostats unit hot/cold suitable for Split AC upto 3TR, Water cooler upto 120 litres, Refrigerator upto 310 litres capacity ozone based filter type hot and cold water cooler 85 litres, Geyser 25/50 litres, all as specified and directed. |
| 223 | Supply and replace overload protector suitable for Split AC upto 3TR, Water cooler upto 120 litres capacity. |
| 224 | Supply and replace magnetic door gasket of refrigerator upto 310 Litres |
| 225 | Supply and replace top cover gasket of water cooler upto 120 litres capacity. |
| 226 | Supply and replace blower/condenser fan motor complete with necessary mounting bracket to and base frames for Split AC upto 3TR and water cooler upto 120 litres capacity. |
| 227 | Supply and fixed Air filter suitable for 1.5/2.0/3.0 ton split type AC of any make complete all as directed. |
| 228 | Supply and fixed insulation for copper tubes of split type AC units, insulation type superior of size 3/8\" diameter. |
| 229 | Supply and fixed insulation for copper tubes of split type AC units, insulation type superior of size 5/8\"diameter. |
| 230 | Supply and fixed in repairs copper tubing soft grade suitable for split type AC suction /discharge line of size 5/8\" diameter. |
| 231 | Supply and fixed in repairs copper tubing soft grade suitable for split type AC suction /discharge line of size 3/8\" diameter. |
| 232 | Supply and fixed PCBcircuit board complete suitable for 1.5/2.0/3.0 ton capacitysplit type air conditioner |
| 233 | Supply and fixed push cock/tap as per existing suitable upto 120 litres capacity water cooler as per existing. |
| 234 | Supply and fix 20mm outer diahigh pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings,fixed to walls/floors /ceiling or concealed in wall andjointed with yellow solvents cement including taking down Unserviceable GItubing complete all as specified and directed. |
| 235 | Ditto as per item No 233 but for outer dia 25mm |
| 236 | Supply and fix 20 mm bore CPVC ball valve suitable for CPVC pipe including necessary fittings, and taking down the old unserviceable gun metal gate/globe valve etc. complete all as specified and as directed. |
| 237 | Ditto as per item No 235 but for outer dia 25mm |
| 238 | Supply and fix in replacement of 15mm stop valves concealed fancy type chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends for unions or CPVC/GI pipe, complete all as specified and as directed. |
| 239 | Supply and fix in repair 15mmbore angle valve quarter turnwith wall flange type chromium plated for fixing with CPVC/GI pipe, complete all as specified and as directed. |
| 240 | Supply and fix in repair 15mm borebib tap Chromium plated quarter turn with flange , fancy type short body/long body cast copper alloy with crutch or butterfly handle screwed for GI/CPVC pipe including taking down the unserviceable one complete all as specified and as directed. |
| 241 | Supply and fix in replacement shower rose brass chromium plated fancy type swivel type of bore 15mm and face dia 50mm (minimum) with CP cup and shower arm of 195 mm long with a bend of 45 degree all as specified and directed. |
| 242 | Supply and fix in repairs low density polyethylene (LDPE) pipe 16 mm dia (outer), 450 mm long suitable for hot/cold water application with brass union on both sides to suit 15 mm bore G.I pipe, complete as specified and directed. |
| 243 | Supply and fix in repair 15mm size health faucet, ABS body, with wall hook and 1 metre stainless steel braided rubber hose pipe including taking down the unserviceable one complete all as specified and as directed. |
| 244 | Supply & Fix in repair 15mm bore Pillar taps, cast copper alloy, CP , chromium plated, screwed down high pressure, screwed for iron pipe or CPVC pipe and fixed complete all as specified and as directed. |
| 245 | Supply and fix 20 mm bore float valve synthetic (PTMT) high pressure with polythene ball of size 6\" dia and fly nut including taking down the unserviceable one complete all as specified and as directed. |
| 246 | Material and labour for Cleaning and removing all scale and dirt, etc, from inside of Rotational moulded polyethylene water storage tanks and from mouths of circulating pipes, etc of tank size exceeding 250 Litres and not exceeding 500 litres capacity including writing the words \"TANK No., TANK CAPACITY,DATE OF CLEANING, NEXT DUE DATE\"in capital letters of suitable size on outside visible place of tank with synthetic enamel whitepaint over black back groundat complete all as specified and directed. |
| 247 | Ditto as per item No 245 but of Size exceeding 500 litres & not exceeding 1000 litres capacity. |
| 248 | Ditto as per item No 245 but of Size exceeding 1000 litres & not exceeding 2000 litres capacity. |
| 249 | Supply and Fix in repairs grating doom 100mm dia of PTMT complete all as specified and as directed |
| 250 | Supply & Fix in repairs Seat and cover for pedestal pan complete all as specified and as directed |
| 251 | Supply & Fix in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 252 | Amount of Credit Schedule shall be deducted to arrive the Contract Sum. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
