E-Procurement Of Material Pcr Material Supply , Earth ( Incl. Cartage ) , Local Sand , Cement ( P.P.C. ) , 40 Mm Grit , 20 Mm Grit , 10Mm Grit , Coarse Sand , Steel Reinf. , Ms Angle, Channel, Tee, Sheet, Pipe Etc. , Brick M-150 , Brick M-100 , Extruded Burnt Flyash Clay Sewer Bricks Conforming To I.S 4885 - 1988 , Stone Boulder 25-40 Kg , Interlocking Tiles ( I Shp. ) 30 Mpa 80Mm Grey , Interlocking Tiles ( I Shp. ) 30 Mpa 100Mm Rubber Moulded Coloured , Kerb Stone M20 ( R.M.C.C. ) 12X12X6 , Plane Glass 4.00 Mm Thk. , Glass Strip 40Mm Wd. 4Mm Thk. , Glazed Tiles 300Mmx450mm Thk. 6Mm , Chequered Tiles Precast 300Mmx300mm , Vitrified Tiles 600Mmx600mm Thk. 10Mm , Vitrified Tiles Anti Skid 600Mmx600mm Thk. 10Mm , Oil Bound Distemper ( White ) , Oil Bound Distemper ( Coloured ) , Synthetic Enamel , Exterior Emulsion Paint ( Apex ) , Red Oxide Zinc Chromate Primer ( Metal ) , Primer ( Wood ) , Water Proof Cement Paint , Mosquito / Fly Proof Ss G-304 Wire Mesh; 0.50 Mm Dia; 1.40 Mm Wd. , Block Board Construction Flush Door With Commercial Ply On Both Faces 30 Mm Thick. , Block Board Construction Flush Door With Commercial Ply On Both Faces 35 Mm Thick. , False Ceiling Perfo.Tiles 60Cmx60cmx12mmthk. , False Ceiling Perfo. Deco.Tiles 60Cmx60cmx12mmthk. , White Cement , Granite , Red Sand Stone 40 Mm , Red Sand Stone 30 Mm , Flush Door 30Mm Thk. Commercial Isi , Acrylic Emulsion Paint , Cement Base Wall Care Putty , Cement Primer , Tarpine Oil , Water-Proofing Cement Compound / Polymer Modified Cementation Coating , Bitumen Vg-10 Grade , Glass Fiber Cloth , Cinder , Polyvinyle Chloride Sheet 400 Micron Thk. , Att Oil , Block Board Construction Flush Door With Commercial Ply On Both Faces 25 Mm Thick , For Flush Door Shutters Extra For Providing Teak Veneering On One Side Instead Of Commercial Veneering , Supplying Anodised Aluminium Sections For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up Material For The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15 ) , Supplying Stainless Steel ( Grade 304 ) Railing Made Of Hollow Tubes, Channels, Plates Etc., With Necessary Stainless Steel Nuts And Bolts Complete, Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc. ) . , Water Proofing Cement Paint
