Cleaning And Maintenance Work Of New Kusunda Area Office ( Tetulmari ) Under Kusunda Area Area
Tender Value
5.67 Lakhs
Estimated cost
Bid Submission
10 Sep 2022
0 days left
EMD
8000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kusunda → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Cleaning And Maintenance Work Of New Kusunda Area Office ( Tetulmari ) Under Kusunda Area Area
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning and Maintenance work of New Kusunda Area Office (Tetulmari) under Kusunda Area |
| 2 | Cleaning, mopping & washing of floor of public buildings, other places neatly with detergent, bleaching powder etc. all complete with tools and tackles and consumable to make the floor clean and hyginic as per instruction of Engineer-in-charge. |
| 3 | Cleaning of all types of roof including removal of dry leaves, weedings and cleaning drain holes, brooming etc. all complete with tools & tackles and stacking the garbage at specified place as per instruction of EIC. |
| 4 | Cleaning of door shutters, window shutters including chowkhats, window grill, glass panes, cobwebs etc.of service/community buildings with necessary detergents, chemicals etc. complete as per instruction of EIC. |
| 5 | Cleaning of roof top water tank, including draining out water. Cleaning,dismantling the tank by bleeching powder etc. and washing the tank with fresh water. Writing of cleaning date with paint on the outer surface of the tanks all complete with tools, tackles and consumables as per instructionEIC |
| 6 | Cleaning of inspection chamber of all sizes and disposal of sludge etc. at specified place outside the colony with all leads including removal and replacing of top cover, mending the damages of cover and hamber if any etc. as per instruction of EIC |
| 7 | Brooming and cleaning of all roads in colony and within the premises of service buildings and other places as required with all tools and tackles & stacking the garbage at specified place as per instruction of EIC. |
| 8 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 9 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 10 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia |
| 13 | Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length 15 mm nominal bore |
| 14 | Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 15 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 16 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 17 | Providing and fixing UPVC pipes complete with GI fitiings including trenching and refilling. Dia 50mm nominal bore |
| 18 | Providing and fixing UPVC pipes complete with GI fitiings including trenching and refilling. Dia 25mm nominal bore |
| 19 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 21 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes |
| 22 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:6 (1 cement : 6 |
| 23 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10 mm |
| 24 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 25 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) :For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work. |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 28 | Total impact of GST for the purpose of CTC |
AI Tender Summary
Tender Timeline
Aug 31, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender