Procurement Of Consumables I.E., Grease Etc., For The Use Of Track Machines..!Procurement Of Consumables I.E., Grease Etc., For The Use Of Track Machines..!, Grease Shell Gadus S3 V220 C2 ; Make -Shell, Plasser Sse / Central Stores / Ryps , Andhra Pradesh 4860.00 Kg , Hyd Oil Shell Tellus S2 Vx68; Make -Shell , Plasser Sse / Central Stores / Ryps , Andhra Pradesh 15048.00 Litre , Grease Shell Gadus S2 V100 3. Make: Shell & Plasser Sse / Central Stores / Ryps , Andhra Pradesh 540.00 Kg , Gear Oil Shell Omala S4gx 150. Make: Shell & Plasser Sse / Central Stores / Ryps , Andhra Pradesh 1045.00 Litre , Gear Oil Mobil Delvac 1 Atf. Make: Mobile, Plasser Sse / Central Stores / Ryps , Andhra Pradesh 836.00 Litre , Grease ( Mobil Oil Mobilith Shc 220 Grease Synthetic Hi Temp. ) For Srgm M / C. It Should Use An Iso Vg 220 Synthetic Base Fluid. Grade- Nlgi 2, Thickener Type- Lithium Complex, Color, Visual- Red, Corrosion Preventive Properties, Rating, Astm D1743- Pass, Dropping Point, Degree C, Astm D2265-265, Four-Ball Extreme Pressure Test, Weld Load, Kgf, Astm D2596-250, Four-Ball Wear Test, Scar Diameter, Mm, Astm D2266-0.50, Penetration, 60X, 0.1 Mm, Astm D217-280, Skf Emcor Rust Test, Distilled Water, Bearing 1, Astm D6138-0, Skf Emcor Rust Test, Distilled Water, Bearing 2, Astm D6138-0, Us Steel Mobility @ -18 C, G / Min, Ams 1390-11.0, Viscosity @ 100 C, Base Oil, Mm2 / S, Astm D445-30.3, Viscosity @ 40 C, Base Oil, Mm2 / S, Astm D445-220, Viscosity Index, Astm D2270-179, Water Washout, Loss @ 79 C, Wt%, Astm D1264-3, This Product Should Meet The Requirements Of: Din 51825:2004-06 - Kp Hc 2 N -30, Recommended Operating Temperature Range Of -40 Degree C To 150 Degree C, It Should Reduce Operating Temperatures In The Load Zone Of Spherical Roller And Ball Bearings. The Lithium Complex Thickener Should Contribute Excellent Adhesion, Structural Stability And Resistance To Water. The Greases It Should Have A High Level Of Chemical Stability And It Should Formulate With Special Additive Combinations To Provide Excellent Protection Against Wear, Rust And Corrosion, And Providing Operating Viscosity At High And Low Temperatures. It Should Have Outstanding High Temperature And Low Temperature Performance, Excellent Protection Against Wear, Rust And Corrosion, Excellent Thermal Stability And Oxidation Resistance, Low Traction Coefficient, Includes Both High And Low Viscosity Grades, Outstanding Structural Stability In The Presence Of Water, Low Volatility Make: Mobil , Vipl, Loram , Grease ( Mobil Temp Shc 32 ) For Srgm M / C.Grade- Nlgi 1.5, Thickener Type- Clay, Base Oil Viscosity Of Greases @ 40 C, Mm2 / S, Ams 1697-32, Dropping Point, Degree C, Astm D2265-260+, Four-Ball Extreme Pressure Test, Weld Load, Kgf, Astm D2596-200+, This Product Should Meet The Requirements Of: Din 51825:2004-06 - Kp Hc 1-2 K -50, Extreme Temperature Applications With A Recommended Operating Temperature Range Of -50 Degree C To 180 Degree C ( With Appropriate Re Lubrication Intervals ) . They Should Combine The Unique Features Of Polyalphaolefin ( Pao ) Synthetic Base Fluids With Those Of An Organo-Clay, Non- Soap Thickener. It Should Have Following Characteristics Outstanding High And Low Temperature Performance, Excellent Resistance To Oxidation And Maintenance Of Grease Structure At High Temperatures, Low Coefficient Of Traction, Outstanding Low Temperature Pumpability, Very Good Anti Wear Protection. Make: Mobil , Loram , Gear Oil ( Mobil ( Traction ) Sae85 W-90 Api Gl-5 ) For Srgm M / C. Grade Sae- 80W-90, Density @ 15.6 C, G / Ml, Astm D4052-0.89, Flash Point, Cleveland Open Cup, Degree C, Astm D92- 240, Kinematic Viscosity @ 40 C, Mm2 / S, Astm D445-135, Pour Point, Degree C, Astm D97- ( -33 Degree C ) , Viscosity Index, Astm D2270-104, It Should Have Following Characteristics Like Good Thermal Stability And Resistance To High Temperature Oxidation, Excellent Rust And Corrosion Protection, Good Low Temperature Lubrication, Compatible With Typical Seals And Gaskets Acceptable Make: Mobil, Loram
