Repair And Maintenance Of Bfl Ug Cable Along Indo Pak Border In Aor Of Source Bop 19R Of 109 Bn Now 123 Bn Bsf Under Shq Bsf Gandhinagar Repair Maint Of Ug Cable
Tender Value
11.19 Lakhs
Estimated cost
Bid Submission
07 Sep 2022
0 days left
EMD
22385
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Bfl Ug Cable Along Indo Pak Border In Aor Of Source Bop 19R Of 109 Bn Now 123 Bn Bsf Under Shq Bsf Gandhinagar Repair Maint Of Ug Cable
BOQ
| Sl. No. | Item Description |
| 1 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 2 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) |
| 3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (i)Above 35 sq. mm and upto 95 sq. mm |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (i)Above 95 sq. mm and upto 185 sq. mm |
| 5 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required (i) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 6 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required (i)90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required (i) 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 8 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required (i)160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.a)3½ X 70 sq. mm (38mm) |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.a) 3½ X 95 sq. mm (45mm) |
| 11 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.a) 3½ X 120 sq. mm (45mm) |
| 12 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.a) 3½ X 150 sq. mm (50mm) |
| 13 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.a)3½ X 185 sq. mm (57mm) |
| 14 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. A)3½ X 70 sq. mm |
| 15 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. A) 3½ X 185 sq. mm |
| 16 | Supplying ,installation,testing and commissioning ofcubical type padestal mounted outdoor Junction Feeder Pillar of size 500mmX500mmX400mm made out of 2.0 mm. thickMS sheet and mounted on 35mm x 35mm x 5mm thickangle iron frame i/c same size of angle 04 nos. legs 500mm lenght erected in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation & refilling,hinged front & back doors with locking arrangements,with provision of fixing of glands at the bottom, antirust design, air ventilation grooves, water drop proofing arrangement ,insluators,earthing studs & connection with 25mm x 5 mm 2 mtr GI strip,nuts bolts etc.as required including connections,interconnetions , painting with primer & finish paint with synthetic enamel paint , 04 nos aluminium bus bar strip suitable for 160 A,415 V capacity with suitable insulated support for aluminium bus bar complete as required. |
| 17 | Fabrication, supplying, installation,and. testing of 415V, 3 Phase 4 wire 50 HzA.C. outdoor type compartmentalized, totally enclosed and double door type weather proof/ vermin electrical distribution panel suitable size to accommodate the following mounting thereon. It shall be fabricated from 2 mm thick CRCA sheet complete with having complete arrangement and providing detachable gland plate at the bottom of the panel , both side openable complete with 200 amp 4 nos. Aluminium bus bar , suitable rating inter-connection ,earthing testing and commissioning etc as required. The panel shall be painted with powder coated of approved brand & shade and supplied with suitable pedastal typeand supplying & fixing of a) 250 Amp 04 nos. Aluminium bus barb)160Amp TP MCCB 01 No. c) 125Amp TP MCCB 01 No,c) 63Amp TP MCCB 03 Nod) 02 nos. Eath studscomponent /accessories i/c connection/interconnection with suitable copper wire in termination with switch gear etc complete as required (minimum size of panel 1000mm long X 800mm width x 400 mm depth on angle iron of size50 mm x 50 mm x 6 mm). |
| 18 | Fabrication, supplying, installation,and. testing of 415V, 3 Phase 4 wire 50 HzA.C. outdoor type compartmentalized, totally enclosed and double door type weather proof/ vermin electrical distribution panel suitable size to accommodate the following mounting thereon. It shall be fabricated from 2 mm thick CRCA sheet complete with having complete arrangement and providing detachable gland plate at the bottom of the panel , both side openable complete with 200 amp 4 nos. Aluminium bus bar , suitable rating inter-connection ,earthing testing and commissioning etc as required. The panel shall be painted with powder coated of approved brand & shade and supplied with suitable pedastal typeand supplying & fixing of a) 200 Amp 04 nos. Aluminium bus barb)125Amp TP MCCB 01 No,c) 02 nos. Eath studscomponent /accessories i/c connection/interconnection with suitable copper wire in termination with switch gear etc complete as required (minimum size of panel 600mm long X 400mm width x 350 mm depth on angle iron of size50 mm x 50 mm x 6 mm |
AI Tender Summary
Tender Timeline
Aug 30, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender