Construction Of Open Gym At Village Mullana, Thamber, Holi Of Block Barara Distt. Ambala
Tender Value
10.59 Lakhs
Estimated cost
Bid Submission
13 Sep 2022
0 days left
EMD
21180
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
barara → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Open Gym At Village Mullana, Thamber, Holi Of Block Barara Distt. Ambala
BOQ
| Sl. No. | Item Description |
| 1 | Air Swing:Providing, designing and fixing of airs swinging pair of size 1150x900x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPEmanufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly.Bearing used shall be maintained free, duly oiled sealed andselflubricatedmadebyreputedcompanytobe approvedbyEngineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts andbolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
| 2 | Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handlebars are tobeprovidedwithhighquality griprubberattopend. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment colours on metal, seat and base cover plate and fixing of equipment etc |
| 3 | Twister: Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2’’x4’’ rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and sel lubricated made by reputed company to be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment tobefixedongroundwithconcreteof minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts andboltswiththebaseplatecover,allcompleteasper direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc. |
| 4 | Bridge Ladder:Product Type PlayingColor your choiseSize 10\" feetMaterial IronCustomized YesAge Group 8 to 20Size: 2.0 x 2.0 mtr./3.0mtrAll joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. |
| 5 | SEE SAW:Product type: PlayingMaterial : Mild SteelSize:-6 feetAge group:- up to 12Seating:-2 SeaterAll joint shall be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
| 6 | Abb Trainer/Sit Up Brench:Main Post-114mmPipe Size- 2’’x4’’Thickness pipe- 3mmPipe standard: GPPaint -Powder coating onlyPost caps- Aluminium/LLDPEScrews other- Nylon lock boltMaterial Mild SteelHolding Capacity 120 kgAge Group 13 years +All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burresto be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. |
| 7 | Double cross walker:Pipe- structure made of Apollo Brand B CLASS GI. Pipe OF 114 mm OD 42 mm OD And 32 mm ODConnecting Pipe –Made of Apollo Brand B CLASS GI. Pipe OF 32 OD.Handle Frame - Made of Apollo Brand B CLASS GI. Pipe OF 42 OD.Handle Grip - Made of food Graded RubberBearing – Ball bearing 6205zzBearing Caps - Made up of HDPE Material 62 mmSeats- Made of HR Sheet OF 2 mm Thickness.Pole Caps – Made up of HDPE Material.Flanges – 8 mm ThickPowder Coated (Thickness 90 micron) |
| 8 | CYCLE:Pipe- structure made of GI. Pipe (IS1239-2004) OF 4” OD 42 OD AND32 OD OF 3 to 4 mm thicknessArm – structure made of GI pipe 32 OD 4 mm thickness.Bearing – Ball bearing Foot Rest - structure made of M.S. SHEET OF 2 mm Thickness.Bearing Caps - Made up of HDPE Material.Seats- structure made of M.S. SHEET OF 3 TO 4 mm Thickness.Pole Caps – Made up of HDPE Material.Paint – Powder Coated (Thickness 90 micron) |
| 9 | LEG PRESS:Center main pipe114mm. B class(3mm to 3.5mm. thickness)2. Sitting pipe 40mm.B class(3mm to 3.5mm. thickness)3. Both side vertical structure pipe 40mm.4. Seat metallic sheet 3mm to 3.5mm. M.S5. Footrest M.S Checked plate 4mm. thickness6. Permanent lubricated sealed bearing of reputed brand.7. Nuts & Bolts Galvanized.8. Nylon covers for covering the nuts & bolts. |
| 10 | PARALLEL BAR:Material GIFinish Powder CoatedProduct Area 1828 x 685 x 1524 mmSafe Play Area 2438 x 1220 mmHandle Frame 38 mm OD G.I. pipe• Parallel Bar made up of 2inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.• All welded joint are of good quality.• High tensile steel with galvanized nut & bolts to be used.• The powder coating done with Pure polyester powder with 60 to70 micron thickness. |
| 11 | PUSH UP BAR:Minimum Order Quantity 1 PieceUsage/Application Only For Outdoor UseMaterial GI, Mild SteelAutomation Grade ManualDimension 3900 X 1450 X 2350 mmMax. User Weight 110 KgPipe Dimension – Main Post 140mm dia and other post 40mm dia.All joint shell be lubricated made by reputed company to be approved by Engineer-in-Charge.Equipment tobe fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
AI Tender Summary
Tender Timeline
Aug 30, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender