Provision Of Toilet Block At Primary School H Langcham Village, Moreh Block, Tegnoupal Dist, Manipur.
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
16 Sep 2022
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
moreh → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Toilet Block At Primary School H Langcham Village, Moreh Block, Tegnoupal Dist, Manipur.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE‘A’ PART - I (CONSTRUCTION OF TOILET BLOCK) Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth upto 50m & lift upto 1.5m disposed up to be leveled & nearby dressed in all kind of soil |
| 2 | Wall Foundation Earth work excavation in foundation trenches or drains including dressing of side and ramming of bottoms lift upto 1.5 meters including getting out the excavated soil and disposal of surplus excavated soil as direction with in a lead of 50 meters Hard/Dense soil |
| 3 | Wall Foundation Brick work with common burnt clay FPS Non modular bricks of class design 7.5 in foundation & plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level 1:3:6 (1 Cement : coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). |
| 6 | Brick work with common burnt clay FPS Non modular bricks of class design 7.5 in foundation & plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 9 | Providing& fixing GI pipe 15mm complete with GI fitting & clamps making good the walls etc concealed pipe including painting with anti corrosive bitumastic, cutting chases & making good. |
| 10 | Providing & fixing water closet squatting pan (Indian type WC) with 100 mm sand cast iron p or s trap 10 ltr low level white flashing cistern, including flash pipe with manually controlled device (handle lever) conforming to IS:7231 with all fitting & fixtures complete including cutting & making good the walls & floor wherever required white vitreous china orrissa WC pan of size 580x440 mm with integral foot rest. |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 liter low level white P.V.C flushing cistern, including flush pipe, with manually controlled device handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 12 | Filling available excavated earth (excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m |
| 13 | Hard core of broken stone boulders 63mm to 45mm size stone aggregate filling under floor for flooring |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) :4 graded stone aggregate 20 mm nominal size) |
| 15 | 20mm cement plaster of mix : for external surface 1:4 (1 cement: 4 coarse sand) external surface |
| 16 | 15 mm cement plaster of mix : or internal surface : 1:4 (1 cement : 4 coarse sand) internal surface |
| 17 | Providing and laying Ceramic non skid glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, lvory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete |
| 18 | Providing and fixing water storage tank with 400 mm diameter nominal base G.I over flow tube 25 mm nominal G.I inlet and 15 mm nominal brass G.I outlet Tube i/c hoisting a height of 10 mm above ground level 500 letter net Capacity storage tank |
| 19 | Providing & fixing brass bib cock of approved quality 15 mm bore nominal dia |
| 20 | Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and rackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 21 | Providing and fixing G.I pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore |
| 22 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality 18.17.1A |
| 23 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed withpolymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 qm/m |
| 24 | Providing and Fixing 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (+ 0.3 mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S tube having dimensions 19 mm x 199 mm and 1.0 mm (+ 0.1 mm) is inserted along the hinge side of the door.Core of the door shutter should be filed with High Density Polyurethane foam. |
| 25 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-III) :4 graded stone aggregate 6 mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits 40 mm thick |
| 26 | Finishing walls with water proofing cement paint of required shade L New work (Two or more coats applied @ 3.84 kg/10 sqm) external surface |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer internal surface |
| 28 | Internal Electrification Supplying and fixing following modular switch on the existing modular plate & switch box including connections but excluding modular plate etc, as required. 5/6 amps switch |
| 29 | Supplying and fixing3 pin, 5 amp celling existing junction box/wooden block including connection etc as required |
| 30 | Supply and fixing brass batten/ angle holder including connection etc. as required with LED Bulb |
| 31 | Supplying and fixing 5 amps to 32 amps rating, 240/15 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existingMCB DB complete with connections, testing and commissioning etc, as required Single pole and neutral 16 Amp |
| 32 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc Single pole 5 Amp |
| 33 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. 2 x 2.5 sq. mm |
| 34 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc, directlyon ceiling / wall, including connection with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 35 | Supplying and fixing of LED Tuble Light 18 W |
| 36 | Septic Tank for 25 UserEarth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, incl getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size) |
| 38 | Brick work with common burnt Non modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:4 (1 cement : 6 coarse sand). |
| 39 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level/TMT bars of grade Fe-500D or more. |
| 40 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement – All work up to plinth level : 1:1:5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 41 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1:5:3 (1 cement :1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 42 | Cement plaster 1:4 (1 cement: 4 coarse sand) external surface 20 mm thickness internal Surface cement plaster (in coarse sand) 1:4 (1 cement:4 coarse sand) |
| 43 | Extra for providing and mixing water proofing material in cement concrete work in dosesby weight of cement as per manufacture’s specification |
| 44 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box100mm top diameter,160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 with graded stone aggregate 40 mm nominal size) and inside plastering with CM 1:3, 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 45 | Providing and fixing unplasticised Rigid PVC sewer pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter. |
| 46 | Providing and fixing unplasticised Rigid PVC sewer Tee conforming to IS : 13592 Type A, including jointing with seal ring , leaving 10 mm gap for thermal expansion Single tee with door. |
| 47 | Providing and fixing unplasticised Rigid PVC sewer Bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm bend. |
| 48 | Providing and fixing unplasticised Rigid PVC sewer pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap forthermal expansion, (i) Single socketed pipes 75 mm diameter. |
| 49 | Supply and fixing of PVC vent Cowl of 75 mm, at toilet and to the septic tank. |
| 50 | Making soak pit 2.5 m diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
AI Tender Summary
Tender Timeline
Aug 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender