Deparment Of Technical Education-DTE has published Purchase Of Equipments For Geotechnical Engineering Lab In Civil Engineering Department , Purchase Of Equipmentsfor Geotechnical Engineering Lab , Hot Air Oven ( Detailedspecification Seperatesly Attached ) , Weighing Balance- 20 Kg / 1Gm ,. Submission Date for this Tender is 13-09-2022. Kitchen Equipment Tenders in palakkad Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Purchase of Equipmentsfor GeoTechnical Engineering lab |
2 | Hot air oven (DetailedSpecification Seperatesly Attached ) |
3 | Weighing Balance- 20 Kg/1gm |
4 | Weighing Balance - 500gm/.01 |
5 | Moisture Cans |
6 | Spatula |
7 | Pycnometer For specific gravity |
8 | Sieves- Standard Test Sieves, 200 mm dia, spun brass frame. 4.75 mm, 2.36 mm, 1.18 mm, 600 Mic, 300 Mic, 150 Mic, 90 Mic, lid and Pan. |
9 | Sieves-Standard Test Sieves, 300 mm dia, G.I. Sheet Frame. 100 mm, 80 mm, 63 mm, 40 mm, 25 mm, 20 mm, 12.5 mm, 6.3 mm, 4.75 mm, lid and pan. |
10 | Sieve shaker- (DetailedSpecification Seperatesly Attached ) |
11 | Adopter- Adopter for 300mm sieves |
12 | Hydrometer- without chemicals |
13 | Hydrometer jar-Hydrometer Glass Jar |
14 | Liquid limit device-(DetailedSpecification Seperatesly Attached ) |
15 | Plastic Limit Apparatus- (DetailedSpecification Seperatesly Attached ) |
16 | Shrinkage Limit Apparatus-(DetailedSpecification Seperatesly Attached ) |
17 | Swell Pressure Test Apparatus - (DetailedSpecification Seperatesly Attached ) |
18 | Core cutter- (Detailed Specification Seperatesly Attached ) |
19 | Sand pouring cylinder- ( Detailed Specification SeperateslyAttached ) |
20 | Laboratory Permeability ApparatusUniversal Permeameter (Suitable for both falling head and constant head test.) (Details of Specification Seperatesly Attached ) |
21 | Compaction Mould -Compaction Mould 100 mm internal dia x 127.3 mm height, 1000 ml volume complete with collar and base plate, all made of mild steel, tie rods of mild steel and wing nuts for clamping. Test is performed as per IS: 2720 (Part- VII). |
22 | Compaction Mould- Compaction mould 150 mm internal dia x 127.3 mm height, 2250 ml volume, complete with collar and base plate all made of mild steel, fixing tie rods of mild steel with wing nuts. Test is performed as per IS:2720 (Part- VIII). |
23 | Compaction Rammer, Light- (Details of Specification Seperatesly Attached ) |
24 | Compaction Rammer, Heavy-(Details of Specification Seperatesly Attached ) |
25 | Laboratory CBR Apparatus (Motorised)- (Details of Specification Seperatesly Attached ) |
26 | Direct Shear Apparatus (Motorised)-(Details of Specification Seperatesly Attached ) |
27 | Unconfined Compression Apparatus (Motorised, Supplied complete with Proving Ring & Dial Gauge) (Details of Specification Seperatesly Attached ) |
28 | Bench type Consolidation Apparatus. (Details of Specification Seperatesly Attached ) |
29 | Triaxial test ApparatusA) Load Frame, Motorised- Quantity-1 B)TRIAXIAL CELL-Quantity-1C)Lateral Pressure Assembly -Quantity-1D)Self Compensating Pressure Apparatus . -Quantity-1 E)Proving ring 10KN capacity-Quantity-1F)Dial Gauge (0.01 / 25mm)-Quantity-1 (Details of Specification Seperatesly Attached ) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail