Bharat Heavy Electricals Limited-BHEL has published Tender For Repair And Maintenance Of T-Ship ( Sanitary And Plumbing Works In Bhel Township, Haridwar ) . => Limited. Submission Date for this Tender is 06-09-2022. Plumbing and Sanitary Work Tenders in haridwar Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 M including getting out the excavated soil, and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50 M. All kind of soil. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. (S.I. No. 2.10.1.2/69) |
| 2 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate (S.I. No. 11.4.2/124 – 11.3.2/274). |
| 3 | Demolishing cement concrete including disposal of material with in 50 M lead 1:3:6 or richer mix (S.I. No. 15.2.1/167). |
| 4 | Dismantling of flushing cistern of any size including stacking useful material near the site and disposal of unserviceable material within 50 M (S.I. No. 15.52/172) |
| 5 | Providing and fixing white vitreous china flat back half stall urinal of 580x380x350mm with white PVC automatic flushing cistern, Parryware/Hindware/Seabird/Oreint (Coral) with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.(S.I. No. 19.5.1/193 – 19.11/296) |
| 6 | P/F white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm (S.I. No. 19.14.2 /195 – 19.9/296). |
| 7 | P/F white vitreous china pedestal type (European type / wash down type) water closet pan (S.I. No. 19.15/195 – 19.9/296). |
| 8 | Providing and fixing 10 ltrs. Capacity white P.V.C. low level flushing cistern with manually controlles device(handle lever) conforming to IS:7231,Parry ware/Hind ware/Seabird/Orient(Coral) with all fittings and fixture complete.(S.I.No.19.20A.1/196) |
| 9 | Labour rate for fixing 10 litre (Full flush) capacity white controlled flush, low level cistern made of vitreous china with all fittings complete. (S.I. No. 19.21A.1/196) |
| 10 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Parryware/Hindware/Seabird/Orient (Coral) complete. White solid plastic seat with lid (S.I. No. 19.23.1/196) |
| 11 | P/F solid plastic seat with lid for pedestal type WC Pan Parryware / Hindware / Seabird / Orient (Coral) complete (Black plastic seat with lid) (S.I. No. 19.23.2/196). |
| 12 | P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm 340 x 10 x 265 mm sizes respectively (S.I. No. 19.26/196 – 19.11/296). |
| 13 | P/F a pair of white vitreous china flat back wash basin of size 550 x 400 mm including making all connections but excluding the cost of fittings (S.I. No. 19.29.2/196 – 19.14/297). |
| 14 | P/F of PVC waste pipe for sink or wash basin including PVC waste fittings complete 32 mm dia Semi rigid pipe (S.I. No. 19.34A.1.1/197) |
| 15 | P/F of PVC waste pipe for sink or wash basin including PVC waste fittings complete 40 mm dia Flexible pipe (S.I. No. 19.34A.2.2/197). |
| 16 | P/F of C.P. brass toilet paper holder. (S.I. No. 19.45.1/197). |
| 17 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality, colour and make, weighing not less than 300gms (Prayag or equivalent)(S.I.No.19.105/205 |
| 18 | P/F G.I. pipe complete with GI fitting and clamps, including cutting and making good the walls etc. (internal work) 15 mm nominal bore. (S.I. No. 20.2.1.1/210 – 20.1.1.1/298) |
| 19 | P/F G.I. pipe complete with GI fitting and clamps, including cutting and making good the walls etc. (internal work)20 mm nominal bore (S.I. No. 20.2.1.2/210 – 20.1.1.2/298). |
| 20 | P/F GI pipe complete with GI fittings including trenching and refilling etc. (External work) 15 mm nominal bore (S.I. No. 20.3.1/210). |
| 21 | P/F GI pipe complete with GI fittings including trenching and refilling etc. (External work) 20 mm nominal bore (S.I. No. 20.3.2/210). |
| 22 | P/F brass stop cock of approved quality 15 mm nominal bore (S.I.No.20.8.1/211). |
| 23 | P/F brass stop cock of approved quality 20 mm nominal bore. (S.I. No. 20.8.2 / 211). |
| 24 | P/F ball valve(brass) of approved quality complete 15mm nominal bore.(S.I.No.20.10.3.1/211) |
| 25 | Construction masonry chamber 30 x 30 x 50 cm inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for stop cock with C.I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design with FPS bricks. (S.I. No. 20.50.2/214 – 20.2/298). |
| 26 | P/F of 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 (S.I. No. 20.90/218). |
| 27 | P/F 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (S.I. No. 20.92/218). |
| 28 | P/F of 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. (S.I. No. 20.93/218). |
| 29 | P/F 15 mm nominal bore C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS : 8931. (S.I. No. 20.94/218). |
| 30 | P/F 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make. Weighing not less than 1.970 kg. (S.I. No. 20.95/219). |
| 31 | P/F PTMT bib cock of approved quality colour and make 15 mm nominal size 122 mm long, 110 mm high and 43 mm wide with 12 mm seat dia and replaceable washers, weighing not less than 105 gms. (S.I. No. 20.96.2/219) |
| 32 | P/F PTMT (An Engineering thermoplastic) grating 125 mm nominal dia. 15 mm high domed shape conforming to I.S. standards and weighing not less than 40 gms of approved quality, colour and make (Prayag or equivalent). (S.I.No.20.100.1.2/220) |
| 33 | P/F PTMT Ball cock 15 mm nominal size, 110 mm long, 70 mm high and 40 mm wide with piston travel ofminimum 5 mm, having weight not less than 142 gms, (62+25+55) (Body+Rod+Ball). Provided with leverage of minimum 230 mm and one piece moulded H.D. plastic ball of 114 mm dia. of approved quality, colour and make complete with epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball (Prayag or equivalent) (S.I.No.20.104.1/221). |
| 34 | P/F PTMT Ball cock 20 mm nominal size, 125 mm long, 77 mm high and 42 mm wide with piston travel ofminimum 6.5 mm, having weight not less than 210 gms, (100+40+70) (Body+Rod+Ball). Provided with leverage of minimum 310 mm and one piece moulded H.D. plastic ball of 127 mm dia. of approved quality, colour and make complete with epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball (Prayag or equivalent) (S.I.No.20.104.2/221). |
| 35 | Providing and fixing PTMT swiveling shower, 15mm nominal size, 95 mm long, 65 mm dia of approved quality colour and make weighing not less than 40 gms with approximate 80 holes of 1.2 mm dia (Prayag or equivalent) (S.I.No.20.106/222) |
| 36 | Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100 x 100 mm size P type With F.P.S. Bricks class designation 75 (S.I.No.21.4.1.2/227-21.5.1/301) |
| 37 | Dismantling of old SW pipe including breaking of joints and bed concrete stacking of useful material neat the site within 50 M lead and disposal of unserviceable materials into municipal dump (100 mm diameter) (S.I. No. 21.5.1/227). |
| 38 | Constructing brick masonry manhole with F.P.S. bricks of 75 class designation in cement mortar 1:4(1 cement : 4coarse sand) RCC top slab with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat neat element complete as per standard design. Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg and weight of frame 15 kg) (S.I. No. 21.11.1.2/228 – 21.7.1/302). |
| 39 | Extra for depth for manhole of size of 90 x 80 cm with FPS bricks class designation 75 (S.I. No. 21.12.1.2/229 – 21.9.1/303). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
