|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | All kinds of soil : |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 4 | Ordinary rock |
| 5 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 6 | All kinds of soil : |
| 7 | Ordinary rock |
| 8 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : |
| 9 | All kinds of soil : |
| 10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 11 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete. |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 13 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 14 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 15 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 16 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 17 | 1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size) |
| 18 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 19 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: |
| 21 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: |
| 23 | Dry random rubbel masanory with hard stone in foundatina nd plint with bond stone in quarry |
| 24 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). Incld extra above plinth |
| 25 | Extra for brickwork in superstructure above plinth level upto floor V level |
| 26 | Cement conc. flooring 1:2:4 mix finished with a floating coat of neat cement incld. cement slurry, but excl. the cost of noising of steps etc. complete,50 mm thick with 20 mm nominal size, stone agg. (Crushed) |
| 27 | Marble stone flooring with 18 mm thick marble stone, sample of marble shall be approved by Engineer I/C over 20mm (avg.) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid & jointed with grey cement slurry incld. rubbing and polishing complete with (Makrana white second quality). |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position:-First class KD. Wood |
| 30 | P/F of panelled or panelled and glazed shutters for door, window, and clerestory windows including ISI marked black enameled M.S.Butt hinges with necessary screws encluding cost of paneling, first class kail wood 35 mm thick |
| 31 | P/F 35 mm thick wire gauze shutters using glavansoned M.S. wire gauze of average width for aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/ and black enameled M.S.Butt hinges with necessary screws, kail wood. |
| 32 | P/F aluminium handles ISI mark with necessary screws all complete 100mm long |
| 33 | P/F aluminium handles ISI mark with necessary screws all complete 150mm long |
| 34 | P/F aluminium tower bolts ISI mark with necessary screws all complete 100mm long |
| 35 | P/F aluminium tower bolts ISI mark with necessary screws all complete 150mm long |
| 36 | P/F bright finished brass 100mm mortice latch and lock with 6lever and a pair of lever handles with necessary screws etc. complete (best make of approved quality |
| 37 | P/F aluminium hanging floor single rubber door stopper isi mark with necessary screws all complete |
| 38 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete. poplar wood |
| 39 | Providing CorrugatedG.S sheet roofingfixed with polymer coated J or L hooks, bolts and nuts 8mm dia meter with bitumen & G.I implet washers or with G.I implet washers filled with white lead & incld. a coat of approved steel primer and two coast of approved paint on overlapping of sheets complete excluding the cost of purlins, rafters and trusses. (0.63mm thick) |
| 40 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 41 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron orissa pattern, 10 Ltr low level PVC cistern, incl. all fittings and fixtures complete and pan size of 580 x 440 mm. |
| 42 | Providing and fixing Stainless Steel kitchen sink with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets without drain board 610x510mm bowl depth 200mm |
| 43 | Providing and placing on terrace polyethylene water storage tank with cover and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 44 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. of 15 mm bore. |
| 45 | Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) |
| 46 | Providing and fixing CP brass bib cock of approved quality of 15 mm nominal bore. |
| 47 | Providing and fixing CP brass long nose bib cock of approved quality of 15 mm nominal bore. |
| 48 | Providing and fixing CP brass angle value of approved quality of 15 mm nominal bore. |
| 49 | Providing and fixing brass stop cock of approved quality of 15 mm nominal bore. |
| 50 | Providing and fixing of PVC soil, waste and vent pipes of reputed make and 100mm dia. Incl. earthwork, refilling etc |
| 51 | Providing and fixing of PVC soil, waste and vent pipes of reputed make and 75mm dia. Incl. earthwork, refilling etc |
| 52 | P/F internal electrification, incl providing lighting/heating points, wires/switches, MCBs, conduit pipes of approved make Havells/Anchor/GM. (As directed by Engineer Incharge) to be paid as per actual |
| 53 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 54 | Foundations, footings, bases of columns etc. for mass concrete. |
| 55 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 56 | Suspended floors, roofs, landings, balconies and access platforms. |
| 57 | Edges of slabs and breaks in floors and walls |
| 58 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 59 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 60 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 61 | Structural steel work in single section fixed for grill work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 62 | Providing & fixing of MS fittings viz bends of suitable degree, tees, collars etc to be fabricated from 6mm Nominal Size MS plate as per the requirement of site including cost of welding. The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job. |
| 63 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per theMade of G.I. wire of dia 4 mm direction of Engineer-in-charge |
| 64 | 12mm Cement plaster finished with a floating coat of neat cement of mix: |
| 65 | 12mm Cement plaster |
| 66 | 1 : 4 ( 1 cement : 4 fine sand) |
| 67 | Providing and applying white cement based putty of 2mm thickness over plastered surfaces to prepare the surface even and smooth complete. . |
| 68 | Distempering with oil bound wasable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including primimg coat with cement primer. |
| 69 | Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface. |
| 70 | Applying priming coat with ready mixed primer of approved paint of required shade on new work. |
| 71 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 72 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 73 | With ready mixedprimer of approved brand and manufacture and required shade |
| 74 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 75 | Two or more coats on new work |
| 76 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipes) |
| 77 | Providing push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints. |
| 78 | 150mm dia D.I |
| 79 | 125mm dia D.I |
| 80 | 100mm dia D.I |
| 81 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 82 | 15 mm dia. nominal bore |
| 83 | 20 mm dia. nominal bore |
| 84 | 25 mm dia. nominal bore |
| 85 | 40 mm dia. nominal bore |
| 86 | 50 mm dia. nominal bore |
| 87 | 65 mm dia. nominal bore |
| 88 | Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and sorts of carriages. Complete Job. |
| 89 | 80 mm dia. pipe |
| 90 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Sand: |
| 91 | 15 km |
| 92 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate below 40mm : |
| 93 | 22 km |
| 94 | 15 km |
| 95 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above : |
| 96 | 15 km |
| 97 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Stone Soling : |
| 98 | 15 km |
| 99 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement and Steel |
| 100 | 24 km |
| 101 | 15 km |
| 102 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Bricks 120km |
| 103 | Carriage of GI pipes by mechanical transport including loading, unloading, stacking at site. |
| 104 | 20km |
| 105 | Carriage of DI pipes by mechanical transport including loading, unloading, stacking at site avg. 15 kms |
| 106 | 125mm dia D.I |
| 107 | 100mm dia D.I |
