}

Supply Of Hoses - 04 Itemshoses - 04 Items,M.S Hose Clips Worm Drive Type To Suit 20Mm Od Rubber Hose For Pneumatic Application And To With Stand Working Pressure Of 10Kg/Sq Cm. , Hose Hydraulic 3/4 Bore High Tensile Steel Double Braided With Outer Layer, Bangalore-Karnataka

Rail Wheel Factory has published Supply Of Hoses - 04 Itemshoses - 04 Items,M.S Hose Clips Worm Drive Type To Suit 20Mm Od Rubber Hose For Pneumatic Application And To With Stand Working Pressure Of 10Kg/Sq Cm. , Hose Hydraulic 3/4 Bore High Tensile Steel Double Braided With Outer Layer. Submission Date for this Tender is 09-09-2022. Coats and Jackets Tenders in Bangalore Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

33677418
Supply Of Hoses - 04 Itemshoses - 04 Items,M.S Hose Clips Worm Drive Type To Suit 20Mm Od Rubber Hose For Pneumatic Application And To With Stand Working Pressure Of 10Kg/Sq Cm. , Hose Hydraulic 3/4 Bore High Tensile Steel Double Braided With Outer Layer
Tender
Indian
Karnataka
Bangalore
09-09-2022

Tender Details

Supply Of Hoses - 04 Itemshoses - 04 Items,M.S Hose Clips Worm Drive Type To Suit 20Mm Od Rubber Hose For Pneumatic Application And To With Stand Working Pressure Of 10Kg/Sq Cm. , Hose Hydraulic 3/4 Bore High Tensile Steel Double Braided With Outer Layer Rubber And Inside Rubber Tube Of Bore 3/4 With Female Swivel 3/4 Bsp Mild Steel Galvanised Fittings On Both Ends And Hose Suitable For Phosphate Easter Oil Application At 2250 Psi Working Pressure,9000 Psi Maximum Bursting Pressure Overall Length 4000 Mm. , Rubber Hose,Heavy Duty,Having Smooth Bore,Hose To Size:100Mm Nb X7000mm,Long,Ceramic Cloth Covered,With Built In Nipples And Flanges On Both Ends.1)Nominal Bore:100Mm With Tolerance Of +/-2Mm.2)Minimum Thickness Of Lining 2.5Mm.3)Minimum Thickness Of Cover 1.5Mm4)Minimum Thickness Of Filler 1.5Mm5)Length Of Soft Ends:-105 +/-5Mm.6)Lining:Natural/Synthetic Rubber/Blend Rubber Compound.7)Reinforcemen:Rubber Impregnated Woven Textile Applied On Bias At Appprox X45 Degrees. Angle Combination With Galvanised Steel Wire. 8)Corrugated Cloth Marked Finish Outer Cover Made From Natural Rubber.9)End Flange Details:Od:228Mm,Thickness:15Mm,Number Of Holes 8 Diameter Of Hole 18Mm,On Pcd Of 190Mm,Material:Ms.10)Working Pressure:-7Kgs/Sqcm. 11)Burst Pressure:21Kgs/Sq Cm. Note:-A)Ceramic Fibre Cloth Size:-Minimum 2Mm Thickness Allover.B)Mtc For Quality & Test Pressure Shall Accompany The Supply.C)Hoses Shall Be Supplied Without Folds And Suitably Packed To Avoid Damage During Transit. , Ceramic Fibre Cloth Woven Super Heat Resistant Nitrile Quality Hose Pipe To Size 100Mm Id, 4 Ply, With Canvas Fabric For Flow Of Water Upto 90 Degree Centigrade And At 7 Kg/Cm Sq Pressure. Hose Length Of 3.6 Mtrs To Bs Table 10 Flange On Both Sides Hydraulically Crimped.Application: Water; Flange Dimensions:Flange Od:228Mm,Thickness:19 Mm; Bore: 100 Mm ;No. Of Holes: 8; Dia Of Holes: 20 Mm; Pcd Of Holes : 190 Mm; Flange Material; Mild Steel;Make: Indo/Hoseking/Dunlop/ Diamond Only. Note: 1) Ceramic Fibre Cloth Size: Min 2Mm Thickness; 2) Material Test Certificate For Quality Of Hose And Pressure Test Shall Accompany The Supply. => Limited

Key Value

Document Fees
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail