Tender For Hsm-2 And Sgp Gate Area Lighting -, ROURKELA-Odisha

Tender For Hsm-2 And Sgp Gate Area Lighting -SUPPLY & ERECTION OF 12M HIGH MAST LIGHT, Supply and erection of 12 Mtrs High Mast Lighting Tower MT complete with accessories. The HMT shall consists of 12 Mtr single section polygonal cross section & continuously tapered tower suitable for wind loading as per IS: 875 Part-3 1987, one 2-tier Lantern Carriage suitable for holding 12 Nos 200W LED Flood Light Fittings, 12 Nos 200W LED Flood Light Fittings, Pulley, Head Assembly, Winch Drum witth Motor & Stainless Steel Rope sets, Trailing Cable, Feeder Pillar Box for operating the HMT, foundation bolts & template etc. The HMT shall be of Bajaj/CGL/GE/Consule make and Light Fittings to be of Bajaj/Syska/Phillips make. The FPB shall contain one 4-Pole 63A MCB, one 40A AB Power Contactor, Time Swich, 2 Nos PBs & 2 Nos 18A AB Contactor for motor operation, suitable Terminal Blocks etc. Erection part consists of making the HMT Foundation as per approved drawing, erection of HMT on the foundation including fixing of all accessories and power connetion to ensure proper functioning of the HMT. All other materials, CONSTRUCTION OF PIPE EARTHING INSTALLATION ASPER IS3043/1987,USING PERFORATED HEAVYGAUGE GI PIPE (4.475 KG/MTR),38MM DIA,2.5METER LONG.EARTH PITS SHALL HAVE STANDARDDEPTH OF 2.5 MTRS USING A HOMOGENEOUS MIXTUREOF BENTINITE AND SOIL IN RATIO OF 1:6.EARTHPIT TOP SHALL HAVE A DIMENSION OF 30CM X 30CMAND 50CM HIGH PRECAST CONCRETE CHAMBER.EARTHELECTRODES SHALL BE CONNECTED TO THE REQUIREDPOLES WITH 20MM X 6MM SIZE GI STRIPS BYPROPER CLAMPING ARRANGEMENTS,AS DIRECTED BYTHE EXECUTING OFFICER, SUPPLY & LAYING OF 50MM×6MM GI EARTHING STRIP FROM EQUIPMENT TO EARTHING GRID/ EARTHING PIT.EARTHING STRIP TO BE LAID ALONG TRENCH/ WALL/ POLE/ PILLAR/ CONCRETE/ GROUND WITH SUITABLE CLAMPS LAID AT A DISTANCE OF ONE METER APART GROUTED TO THE WALL/ CONCRETE FLOOR OR WELDED TO THE IRON STRUCTURE.ALL THE WELDED PORTION OF THE STRIP IS TO BE PROVIDED WITH ANTI RUST COATING SO AS TO PREVENT CORROSION (CHROME GALVANIZE OF STANVAC MAKE).THE STRIP SHALL BE PAINTED IN ZEBRA FASHION WITH BLACK BASE & WHITE/ YELLOW/ (OR ANY OTHER COLOR AS PER SITE REQUIREMENT) COLOR STRIP.ASIAN PAINT/ BERGE MAKE SYNTHETIC ENAMEL PAINT TO BE USED.ALL THE MATERIALS (GI NUTS/BOLTS/ WASHERS, GI CLAMPS ETC) & TOOLS (WELDING MACHINE, DRILLING MACHINE, CUTTING MACHINE ETC) ARE TO BE ARRANGED BY THE EXECUTING AGENCY, MANUAL DIGGING OF TRENCH,1 MTR DEEP&0.75MTR WIDE FOR THE PURPOSE OF LAYING LT CABLEUPTO 3.5X240 SQ MM SIZE IN ALL KINDS OF SOIL/ROAD/RAILWAY TRACK AND BACKFILLING THE SAMEIN COMPACT FASHION AFTER CABLE LAYING TOBRING BACK THE SURFACE TO ORIGINAL LEVEL.INCASE OF ROAD CUTTING,FILLING HAS TO BE DONEWITH PROVIDING 1:3:6 CEMENT CONCRETE(1CEMENT,3 SAND AND 6 CRUSHER BROKEN STONE AGGRATE TO40 MM DOWN GRADEDAFTER SAND FILLING.THESCOPE, OF THE ITEM SHALL INCLUDE PROVISION ANDLAYING OF NEW BRICKS (16 BRICKS PER METERLENGTH OF TRENCHFOR PROTECTION OF CABLE ASPER NORMAL STANDARD CABLE LAYING PRACTICE.CLEAN DRY SAND SHALL BE PROVIDED&FILLED INTHE TRENCH BELOW CABLE FOR CUSHIONOING.BRICK LAYING AND SAND FILLING SHALL BE DONEAS PER THE ATTACHED SKETCH.THE SUPPLY ANDTRANSPORTATION OF ALL MATERIALS,TOOLS ANDTACKLES SHALL BE WITHIN THE SCOPE OF THEPARTY, LAYING OF LT CABLE OF SIZE VARYING FROM 3.5X35 TO 3.5X240 SQ.MM IN THE TRENCH.LT CABLESHALL BE SUPPLIED BY RSP.TRANSPORTTION OFCABLE FROM RSP STORES TO THE SITE OF WORK ANDTRANSPORTATION OF EMPTY CABLE DRUMS TO STORE/STORAGE YARDS SHALL BE WITHIN THE SCOPE OFTHE PARTY.STANDARD ROUTE MARKERS AND NAMETAGS SHALL BE SUPPLIED AND ERECTED/FIXEDALONG THE CABLE ROUTE.HANDLING AND LAYING OFTHE CABLE SHALL BE DONE AS PER IS1255.TERMINATION OF CABLE ENDS SHALL BE DONE BYTHE PARTY WITH SUPPLY OF CABLE END SOCKETSOF REQUIRED SIZE AND PVC TAPPED, etc.

Refer document

Refer document

Refer document