Tender For Under Jal Jeevan Mission Water Supply Scheme Jankapur Tq Washi
Tender Value
52.78 Lakhs
Estimated cost
Bid Submission
15 Sep 2022
0 days left
EMD
52785
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
washi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Under Jal Jeevan Mission Water Supply Scheme Jankapur Tq Washi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Sep-2022 | Under Jal Jeevan Mission Water Supply Scheme JANKAPUR TQ WASHI | Date | 10-Sep-2022 |
| 2 | 11-Sep-2022 | Under Jal Jeevan Mission Water Supply Scheme JANKAPUR TQ WASHI DATE | Date | 15-Sep-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | SUWORK NO. 1 :- SURFACE BOREWELLItem No. 1 :-Taking surface bore well of 150mmdia and 60M of depth (as per GSDA certificate) (2 X 60 = 120 Mtr ) |
| 2 | Item no 2 :-Providing PVC casing pipe 180mm 6kg/cm2 IS 47985-1988 - ( 2 X 6 = 12 Mtr.) |
| 3 | Providing PVC cap of 180 MM Dia.(For Two Borewell) |
| 4 | Item no 3 :-yield testing charges (150 MM BORE WELL ) 2 NOS |
| 5 | Item no 4:- Providing erecting and giving test of submersible pump set confirming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, motor suitable for working on 415 V +- 10% , 3 PH , 50 HZA.C.supply with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable uction stainer.pump should have suitable discharge out let as per manufactures design.antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size erection clamo 10 mm thick shall be provided with each pump.Submersible pump 150 mm dia (with bronze/ stainless steel (CF8M) impeller) up to 8 stage head m (Submersible pump of 5 BHP) |
| 6 | Item no 5 :-Panel board inluding all access0ries angle frame, panel box,starter,main switch,capacitor set of poilet lamp volt meter,ammeter |
| 7 | item no 6:-providing ISI marks G.I.pipes of following class and dia excluding GST levied by GOI&GOM in all respect inspection charges transportation tostore etc. complet as per IS- 129/2004 note one coupler shall be provided with each full lenth of pipe cost of which is included in rates below. (50 mm Dia Heavy 5.16 kg/m) |
| 8 | Item no 7 :- Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(3 core 4 sqmm) |
| 9 | Item no 8 :- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete (50 mm dia Reflux valve PN-1) |
| 10 | SUWORK NO-2 . DEEPNING OF EX JALSWARAJ WELL & HORIZONTAL BOREWELL. Item no 1 :- Drilling of Horizontal bore including cost of all labour fuel machinery and transportation charges etc.comp. (150.00mm dia. 4 X 30 =120 M) |
| 11 | Item no 2 :- Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. LIFT 11.5 TO 12.00 M. |
| 12 | Item no 3 :- Excavation in general in hard material comprising off soft rock hard rock Manjara rock, etc. by blasiting controlled blasting, chiseling as required in wet or dry condition for Head works i.e. Intake well. Connecting Pipe. jack well, pump House, supply well, etc. for lift 0 to 1.5 M and lead of 150 M including barricading, guarding, disposing of surplus excavated stuff within a radius of 0.5 Km. As directedby Engineer-in-charge. Lift 12.00 to 13.50 M |
| 13 | Lift 13.50 to 15.00 m |
| 14 | Lift 15.00 to 16.50 m |
| 15 | Lift 16.50 to 18.00 m |
| 16 | Lift 18.00 to 19.50 m |
| 17 | Lift 19.50 to 20.00 m |
| 18 | Item no 4 :-Dewatering the excavated trenches and pools of water in the building trenches/pipeline tren-ches, well works by using pumps or other devices including desposing off water to safe dist-ance as directed by engineer-in-charge. ( Including cost of machinery, Labour charges etc ) |
| 19 | Item no 5 :- Carrying out recupration/ yield test for aserting the discharge of constructed well/ excavated profile as directed by engineer in charge. The test carried out by drawing down water from well/ profile below normal/ subsoil water level upto full dept rise in water level is recorded. the normal water level/ subsoil water level in the well/ profile as well as strainer suction level at pump as per design of W.S. scheme shall be recorded prior to the test including the cost ofall materials. overhead, labours etc. completed as directed. the test shall be carried out as per technical circular No. 2597 dt.20/11/97 and shall be carried out for 7 days. (LPS Less Then 25000) |
| 20 | SUWORK NO. 3:- PUMPING MACHINERY -5BHP (JAL SWARAJWELL)Item no 1 :-Providing erecting and giving test of submersible pump set comfirming to IS 8034 & motor confirm. to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discha-rge with stainless steel shaft. Motor suitable for working on 415 V + or - 10% 3 Phase, 50 Hz, A.C.supply, with cable guard, thrust carbon / fibre bearing to with entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable discharge out let etc Submersible pump set 150 mm. diaup to15 Stage5 BHP Discharge- 7194,Head =42 Mtr. |
| 21 | Item no 2 :- Providing ISI mark G.I. pipe of following class and dia including all local & cenral taxes. Octroai. Inspectioncharges, transportation to store etc. complete.50 mm dia G I Heavy Class pipe |
| 22 | item no 3:- Providing and supply ISI Standard CI double fla-nged pipes including all taxes. Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in-charge80mm CIDF Pipe |
| 23 | Item no 4 :-Providing and supplying ISI mark CI D/F reflux valves ( non- return valves ) of following dia inc-luding all taxes ( Central and Local) railway freig-ht, inspection charges unloading from railway wagon, loading into truck, transportation upto etc complete80 mm dia reflux valves |
| 24 | Item no 5 :- Providing, erecting, double flange sluice valveconforming forIS 2906/14846 incuding worn gear arrangements as per tes pressure stainless steel spindlle, caps including all taxes transportation etccomplete.80 mm CIDF Sluice Valve |
| 25 | Item no 6 :-Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.500 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combinedmeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. |
| 26 | Item no 7:- Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 27 | Item no 8 :- Providing and supplying ISI standard CI flanged/ S&S specials including all taxes ( central& local) railway freight, insurance, unloading from railway wagon, loading into truck transport to dep-artmental store / site, unloading stacking etc. complete. |
| 28 | Item no 9 :- EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 29 | item no 10:- Providing and erecting pressure gauge of required capacity complete with syphon tube, isolating cock suitable for 12mm dia GI pipe. Pressure gauge shall be installed as directed, with tapping on rising main pressure gauge (100 mm dia) |
| 30 | SUB WORK NO. 4 :- RISING MAIN. .Item No. 1 :-Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material likeechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.A.) PE-100 a) 6 Kg/Sq. cm : 90 MM Dia 6 Kg/Cm2 HDPE Pipe Line |
| 31 | Item No. 2 :- Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below - a) 80 mm dia.G I Pipe (Medium class) |
| 32 | Item No. 3 :- Providing & supplying at site of work CI/ PVC /GIspecials suitable for above said pipes including cost of all taxes fright chargesoctroi loading Unloading conveyanceetc. |
| 33 | Item No. 4 :- Providing and Fixing ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984)80 mm dia Non return valve |
| 34 | Item No.5:- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm dia Sluice valve |
| 35 | Item No.6 :- Providing , Supplying,double ball Air valves as per IS-10845 and MJP’s standard specificationof approved make and quality of following dia and class including all taxesetc. complete50 mm dia Doubleball Air valve |
| 36 | Item No. 7 :- Excavation for foundation/ pipe trenches in earth soils of all types sand, gravel,soft murum including removing the excavated materialup to distance of 50 m & lift as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation etc complete. ( Lift up to 1.50 m ) |
| 37 | Item No. 8 :- Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete.( Lift up to 1.50 m ) |
| 38 | Item No. 9 :- Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up toa distance of 50 m etc complete-( Lift up to 1.50 m ) |
| 39 | Item No. 10 :- Excavation for foundation/ pipe trenches in hard rock by controlled blastingincluding trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it measurable he-aps with in a distance of 50 m & lift as below, etc complete(Lift up to 1.50 m ) |
| 40 | Item No. 11 :- Filling in plinth and floors murum bedding in trenches with approved murum fromfoundation 15 cm to 20 cm layer including watering andcompaction etc. complete. |
| 41 | Item No. 12 :- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-763490mm dia HDPE pipe 6 Kg/cm2 |
| 42 | Item No. 13 :- Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge - a) 80 mm dia.G I Pipe (Medium class) |
| 43 | Item No. 14 :- Lowering laying and jointing in position following CI.D/F reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. 80 mm dia Non Return valve |
| 44 | Item No. 15 :- Providing and laying in sity 1:2:4 (M-150) grade of C.C. oftrap/granite/ quartzite/gneiss metal for foundation and bedding including dewatering form work compacting and curing finishing etc complete. (PCC M- 150) |
| 45 | Item No. 16:- Refilling the trenches with availableexcav-ated stuff with soft material first over pipe line and then hard material in 15 cm layers with all leads and lift including consolidation surcharging etc complete. |
| 46 | SUWORK NO. 5 :- RCC ESRItem No. 1 :- Designing and constructing R.C.C.elevatred service reservoirs of following caparcity with R.C.C. staging consisting of cloumns, interenal and external aracings spacedvetically not more than 6 Mtrs. centre including excavation in all type of strata, foundation concrete, cement plaster with water proffin compound to the inside face of the container including refilling, dispoing of surplus stuff within a lead of 50 Mtrs. all labour and material charges including lowering, laying and erecting and hosting and jointing of pipe asembly of inlet, outlet, washout, over flow bye-pass arrangement as per departmental design, providing and fixing accessores such as M.S.ladder, C.I.man hole frame and cover water level indicators lightneing conductors.etc complete.RCC ESR Cap. 20000 Liter St. H. 7 M |
| 47 | Item No. 2 :- Providing and supplyingI.S.I. standered cast iron doube flanged pipes including all central and local taxed, octri inspection charges insurance railway frieght unloading from railway wagoan, loading into trucks, transport to stores, unloading stacking etc. complete.1) 80 mm dia CIDF pipe |
| 48 | Item No. 3 :- Providing double flange sluice valve conforming forIS 2906/14846 incuding worn gear arrangements as per test pressure stainless steel spindlle, caps including all taxes transportation etccomplete.1)80 mm dia CIDF Sv. Valuve |
| 49 | Item No. 4 :- Providing and supplying ISI standard CI flanged/ S& S specials including all statutory duties & taxes such as GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store /site, unloading stacking etc. complete. |
| 50 | SUWORK NO. 6 :- DISTRIBUSTION SYSTEM Item No. 1 :- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, includingb transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 90 mm dia 6 kg/cm2 H.D.P.E PIPE |
| 51 | 110 mm dia 6 kg/cm2 H.D.P.E PIPE |
| 52 | Item No. 2 :-Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates belowa) 80 mm dia.G I Pipe (Medium class) |
| 53 | Item No. 3 :- Providing double flange sluice valve conform-ing forIS 2906/14846 incuding worn gear arran-gements as per test pressure stainless steel spindlle, caps including all taxes transpor-tation etccomplete.80 mm dia Sluice valve |
| 54 | 100 mm dia Sluice valve |
| 55 | Item No. 4:-Providing and supplying HDPE/C.I/G.I. Specials. |
| 56 | Item No. 5 :-Excavation for foundation / pipe trenches in earth.Soils of all types. Sand, gravel and soft murum, including removing the excavatedmat-erial up to a distance of 50 meters andlifts as below, stacking and spreading as directed, manual dewatering, etc complete |
| 57 | Item No. 6 :- Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete.lift 0.00 to 1.50m |
| 58 | Item No. 7 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry Found-ation asphalt road including removing the exca-vated materialup to a distance of 50 m beyond area and lifts as below, stacking as directed by Engineer- in- charges etc complete lift 0.00 to 1.50m |
| 59 | Item No. 8 :-Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction etc complete. |
| 60 | Item No. 9 :- Lowering, Laying and Jointing H. D. P. E./M D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II90 mm dia 6 kg/cm2 H.D.P.E PIPE |
| 61 | 110 mm dia 6 kg/cm2 H.D.P.E PIPE |
| 62 | Item No. 10 :- Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge80 mm dia.G I Pipe (Medium class) |
| 63 | Item No. 11 :- Lowering laying and jointing in position following CI.D/F reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete, 80 mm dia Sluice valve |
| 64 | 100 mm dia Sluice valve |
| 65 | Item No. 12 :- Providing and fixing C.I. road box including loading, unloading and carting to site of workincluding all necessary excavation in all typesof strata and fixing in murum packing, etc.complete.100 x 225 mm (20 kg) |
| 66 | Item No. 13 :- Providing and laying in sity 1:2:4 (M-150) grade of C.C. oftrap/granite/ quartzite / gneiss metal for foundation and bedding including dewatering form work compacting and curing finishing etc complete |
| 67 | Item No. 14 :- Refilling the trenches with availableexcavated stuff with soft material first over pipelineand then hard material in 15 cm layers with all leads and lift including consolidation surcharging etc complete |
| 68 | SUBWORK NO. 07 :-NAME BOARDItem No. 1 :- Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 69 | SUBWORK NO. 08 :-TRIAL & RUN Item No. 1 :- Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. |
| 70 | Item No. 2 :- TCL Requirement. |
| 71 | Item No. 3 :-MSEB Charges Pure Water P/Mach |
AI Tender Summary
Tender Timeline
Sep 11, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 10, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 15, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 16, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender